4 Attachment(s)
5 inch wider Bear Mountain Bridge
I have been enjoying my DIY Bridge and tweaking it every day for a while now, but I finally altered my JRB Bear Mountain Bridge to be as wide as my DIY. I actually like it better than mine now since it is as wide, lighter than mine and narrower in the center than mine; it's easier to get out of by far.
What i did was cut the end caps and open them by about 8 inches at the top and sewed Omni around the hemmed edges. I intend to make a bugnet insert and a DWR insert for the ends. It is so much more open and there is no shoulder squeeze at all. :):p;)
I will post pictures on this thread tomorrow of the hammock hanging with me in it. Sorry about that, don't have another model that will get their picture taken.... mule
1 Attachment(s)
another pic of the spreader bars
Here is another picture, showing new 35 inch (between slots) speader bars.
8 Attachment(s)
The hanging 35 inch wide BMB
Some Pictures of my mod to the BMB. I made inserts to go in the end caps where I cut a slit to allow it to be wider using 35 inch spreader bars. Take a look at more pictures of it in my posted pictures.