Originally Posted by
Trugracie
Will post one as soon as I make some.
Simply put the washer in a vice right where the inner circle is, and whack it a few times with a hammer. I had to play with it for a little, but finally got them right.
The only problem I have, is I could almost never get them out.
BTW
If you're still having problems setting the anchor, simply pull your driver up bout an inch or till you think it clears the washer, turn 90 degrees, and pull on the rope, that helps turn the washer. After that, pull the driver out and stomp the hole a few times. It usually helps pack everything down.:thumbup1: