And I think the general consensus on PVC was 3/4 or larger, correct?
Printable View
And I think the general consensus on PVC was 3/4 or larger, correct?
I have experienced no tippiness and I've been using 1/2" pvc. The pvc that kinked on me was CPVC and the 1/2" variety of that is a lot smaller than schedule 40 PVC. I also had the cpvc inside the channel so it was being bent rather than compressed. YMMV HYOH etc and so on. :D
Lately I've been playing with this. I would prefer a wood spreader bar but this was quicker and already lying around.
I just took one line and put two fixed eyes in the ends then took two separate pieces of amsteel and inserted them thru the amsteel@ 90° to each other and 90° to the line they were inserted into.... clear as mud? Then tied a wall and crown knot the the pieces of amsteel sticking thru the suspension. I can install and remove the SB at will and it bears up against the knots to keep it from getting all kittywampus on me. The fabric still has a tendency to all want to go to one corner but it still seems to work.
https://lh5.googleusercontent.com/-I...25203%2529.jpg
https://lh3.googleusercontent.com/-o...25203%2529.jpg
https://lh5.googleusercontent.com/-B...25203%2529.jpg
Are those the Elephant Trunks? I really like the look and functionality of them. May be making yet another hammock purchase.....and to think I make fun of THOSE people who trick out their cars...I will be about $18k into my hammock when it's over.....geez this forum is killing any hope of my kids getting away from a state school.
Will this work with just a whoopie?
Jeremy