RidgeRunner and WL Big Daddy Tarp
I was messing around a couple of weeks ago and set up my new RR and a Wilderness Logics Big Daddy Tarp. My BD has a 144" ridgeline, so I wanted to see how it would work with the spreader bars of the RR. In short, it worked just fine and I didn't really even mess with the hang at all.
I had it pitched pretty low, so here is a side view showing the coverage:
It is touching the sides a bit, but once I got in the hammock it slipped below the sides with a little room to spare.
Here is a shot from the other side, same basic conditions apply.
In this side view you can see that the head end spreader bars push out just a little; I think that a side pull out would take care of that.
I haven't done an overnight using this particular rig, but I think I will do so without any fear of damaging the tarp with the spreader bars.
RR with both Warbonnet Edge and Superfly side-by-side
Quinn: Warbonnet DL Bridge, 20 degree Hammock Gear FLUQ and 1/8 inch EVA foam, DYI 900 fill TQ, Warbonnet Edge, Osprey 40L BP
Al: Warbonnet DL Bridge, o degree Warbonnet FLUQ , DYI 900 fill TQ, Warbonnet Superfly, ULA OHM 2.0
Other Pics on facebook at http://www.facebook.com/al.brookins.3
You do need to rig wide with the RR's.
I believe there is also a great pic of the Superfly interior with the RR in my gallery.