Okay well the holes did not work at all lol, but I found an alternative. I cut a 3 3/4 inch piece of 3/4 inch PVC and made a 1/2 in bevel. Worked great. Here are pics of It loaded on the ladys hammy....
Type: Posts; User: TheCoyote
Okay well the holes did not work at all lol, but I found an alternative. I cut a 3 3/4 inch piece of 3/4 inch PVC and made a 1/2 in bevel. Worked great. Here are pics of It loaded on the ladys hammy....
Its basically the same thing, check back in tomorrow around 2pm Ill have test results and info.
Jeremy
Will have to wait till tomorrow around 1:) but will do
Jeremy
Thats almost what im talking about. Put the fixed eye through the other hole as well then feed the rest of whoopie though fixed eye. The fixed eye should run though both holes. Like this, so you run...
It wont affect its adjustability. My idea is very similar to yours but in but instead if wrapping it around the pole there will be holes drilled in it and you feed the fixed eye through each end and...
Sort of, I was thinking of putting the whoopie in the channel as you normally would then have a pvc piece with two holes drilled in it and run it though one hole into the channel and out the other...
Either putting it in the actual channel or before finishing the larkes head put it in-between and finish it off? Not sure lol
Jeremy
Will this work with just a whoopie?
Jeremy