the foot box issue

[HappyCamper]

Photo please.

Knotty, here's a picture I already had of the zipper side. It's the same on the footbox side.

[BillyBob58]

...................................
PS, edit, This slipping issue is usually from drawing the end cord too tight.... There should be approx 16-18 inches between the toggles when cinched as a UQ on hammocks of this size.

Pan, pre-use during set up adjustment, should there be that amount of distance between the toggles on both ends, or just the foot?

[Peter_pan]

Pan, pre-use during set up adjustment, should there be that amount of distance between the toggles on both ends, or just the foot?

BB58, et al,

About the same on both ends.

pan

[lori]

I'm curious if this is an issue with JRBs with or without the center draw cord mod - or if that even makes a difference. I haven't noticed any footbox issue. I have the foot end center draw cord.

[Knotty]

Knotty, here's a picture I already had of the zipper side. It's the same on the footbox side.

Now I get it. Thanks HC.

[Peter_pan]

I'm curious if this is an issue with JRBs with or without the center draw cord mod - or if that even makes a difference. I haven't noticed any footbox issue. I have the foot end center draw cord.

Lori,

It does not make a difference.... the overall should be 16-18 inches between the corner toggles... For center pull footends it should be 8-9 inches in each half.

Pan