Page 1 of 10 123 ... LastLast
Results 1 to 10 of 93
  1. #1
    New Member TreeDweller's Avatar
    Join Date
    Aug 2007
    Location
    Mountain View, CA
    Posts
    16
    Images
    15

    Rings, straps, and gardahitch for hanging light

    I've spent a lot of time on the forums reading about rings, buckles, and straps for hanging my Hennessy Hammock. Admittedly I've never had trouble tying the HH figure eight but I've hated untying to readjust. However I was hesistent to switch to a strap. I wanted something that worked with the spectra line. Then I started reading about Hitchcraft and the Panther Rope Cleat but didn't like the questionable weight limitations and potential for rope abrasion.

    So I went out and picked up some SMC rings, Camp Nano biners, and straps. Came home and went wandering the forums again. Found a post by greggg3 about the garda hitch where he provided this great link http://www.chockstone.org/TechTips/GardaHitch.htm (original post at: http://www.hammockforums.net/forum/s...ighlight=garda)

    It seemed great. I got out my hammock ran a garda hitch through the biners and just pulling it was clear how well it would hold. However the biners are 29 grams each (by my little hanging postal scale). While the SMC rings are only 11 grams each. A savings of 72 grams (2.5 oz) when using four.

    So here's my idea ("mine" only if you ignore all the help from this site, which shouldn't be done!) for a really light, fast hanging option using the original spectra line on a Hennessy Hammock (or others). It requires making new tree huggers similar to slap straps that have SMC ring pairs sewn at one end. There would be a loop at the other end for the rings to pass through. There would also be other loops (as in a rock climber's daisy chain or a Slap Strap) that you could pass through instead, allowing for you to adjust for tree size. (This might not be necessary, but I've hung between some pretty close trees. Trees too wide to wrap around twice, but if I'd just looped through the end of my tree huggers I'd have not been able to tighten the hammock). After wrapping the straps as many times as needed around the tree, you would pass the rings through the best loop, tie a garda hitch into the rings, pull tight, and lie down. From what greggg3 suggests it should be easy to undo the garda hitch once you are no longer hanging in the hammock.

    I've mocked up what this would look like. Imagine my super shelter bag is the tree trunk and you are looking down from above. The strap goes around the trunk and through a loop. The hammock line is then tied through the rings in a garda hitch (really easy!) and the loose end pulled tight. Test it by pulling down, and then lie down. (I think if you wrap the line the wrong way you won't be able to pull tight and get tension so you'll know you've made a mistake). After your weight is off the hammock it should be easy to pull the knot back out.

    You could add a couple of half hitches for peace of mind that the line won't pull through.

    Does anyone see problems with this? I'll try to find sewing time later in the week and give it a real test. I've posted an image in the gallery and will attach it here.
    Attached Images Attached Images

  2. #2
    Senior Member lvleph's Avatar
    Join Date
    Feb 2007
    Location
    RVA
    Posts
    714
    Images
    9
    I think your weight savings would be negated by the extra length of webbing needed for the loops. Nice idea though.

  3. #3
    slowhike's Avatar
    Join Date
    Oct 2006
    Location
    Winston-Salem, NC
    Hammock
    DIY, gathered end , w/ spreader
    Tarp
    JRB Universal
    Insulation
    DAM/ HG Incubator
    Suspension
    Webbing and rings
    Posts
    11,677
    Images
    319
    interesting idea & nice demonstration.
    i really don't know how it would all balance out, but looks like it wouldn't be that hard to make & test.
    just be sure to do a good job on sewing those loops so they don't pull loose.
    i hope you'll give it a try & let us know what you think. that may be an easy solution for those that aren't willing to cut the rope that came on their hh.
    and welcome to HF. ...tim
    I too will something make and joy in it's making

  4. #4
    Member
    Join Date
    Jan 2007
    Location
    NW Arkansas
    Posts
    67
    i Made tree straps exactly like those, out of nylon tubular webbing rated for 4000+ lbs.

    the sewn loops didnt hold, well, not all of them have held.

    I gave up using them, when a loop snapped, it was SCARY.

    I sewed a 1.5 inch long 'X' shape, and boxed it, usiing a zig zag stitch, and non cotton thread.

    IM not sure how I could have made it much stronger?

  5. #5
    Senior Member Otter1's Avatar
    Join Date
    Dec 2006
    Location
    FL
    Hammock
    DIY Hexon 1.0, Hexon 1.6
    Tarp
    WB Mountainfly
    Insulation
    HG UQ's, EE TQ
    Suspension
    Dutch Mantis
    Posts
    2,669
    Ed Speer sews four parallel bartacks in the strap of ones he sews. Waiting on mine...

  6. #6
    Member
    Join Date
    Jan 2007
    Location
    NW Arkansas
    Posts
    67
    the thing I sewed is called a 'bartack right?

    Im trying to envision what you are saying, you mean he makes 4 in a row down the length of the loop's overlap?

    as a note, the loops that have given on mine, were NOT on the ends, but the un-used loops in the middle section of the strap around the tree or pole.

    for some reason the end straps are showing no wear?

    I tie the hammock rope on them with a larkshead, or simple double overhand knot, maybe that mostly loads the natural side of the loop once its tight?



    Quote Originally Posted by toddhiker View Post
    Ed Speer sews four parallel bartacks in the strap of ones he sews. Waiting on mine...

  7. #7
    New Member SteinbergerGPPRo's Avatar
    Join Date
    Jul 2007
    Location
    Asheville, NC
    Posts
    23
    Images
    3
    Did you use polyester thread?

  8. #8
    Senior Member Otter1's Avatar
    Join Date
    Dec 2006
    Location
    FL
    Hammock
    DIY Hexon 1.0, Hexon 1.6
    Tarp
    WB Mountainfly
    Insulation
    HG UQ's, EE TQ
    Suspension
    Dutch Mantis
    Posts
    2,669
    [QUOTE=ozarkjeep;25431]the thing I sewed is called a 'bartack right?

    Im trying to envision what you are saying, you mean he makes 4 in a row down the length of the loop's overlap?

    QUOTE]

    I haven't seen them yet, but as I understood him on the phone his bartacks were ACROSS the strap, with a little distance (can't remember how much) between each.

    As I write this, I realize how useless I am to help you! Sorry about that, but I'll report back once I receive the straps.

  9. #9
    Senior Member GrizzlyAdams's Avatar
    Join Date
    Apr 2007
    Location
    Illinois
    Hammock
    GrizzBridge Ariel
    Tarp
    HG Cuben Winter
    Insulation
    DIY UQ
    Posts
    4,777
    Images
    564
    [QUOTE=toddhiker;25433]
    Quote Originally Posted by ozarkjeep View Post
    the thing I sewed is called a 'bartack right?

    Im trying to envision what you are saying, you mean he makes 4 in a row down the length of the loop's overlap?

    QUOTE]

    I haven't seen them yet, but as I understood him on the phone his bartacks were ACROSS the strap, with a little distance (can't remember how much) between each.

    As I write this, I realize how useless I am to help you! Sorry about that, but I'll report back once I receive the straps.
    In this picture, on the white webbing connected to the ring, there are three bar tacks, black stiches across the width of the webbing. Not particularly good ones, but bar tacks just the same.

    Grizz

  10. #10
    Senior Member stoikurt's Avatar
    Join Date
    Oct 2006
    Location
    Panama City, FL
    Hammock
    Custom 1.7/1.1 WB Blackbird
    Tarp
    DIY SWT
    Insulation
    JRB Nest & DIY RMS
    Suspension
    Whoopee Slings
    Posts
    1,006
    Images
    97
    [QUOTE=ozarkjeep;25431]the thing I sewed is called a 'bartack right?
    QUOTE]

    Could be, a bar tack is nothing more than zig-zag stitches that are very very close.

    Your thread may have been old or bad.
    Stoikurt
    "Work to Live...Don't Live to Work!"

  • + New Posts
  • Page 1 of 10 123 ... LastLast

    Similar Threads

    1. Straps and Rings
      By jons4real in forum [SOLD/WITHDRAWN] Items no longer available
      Replies: 6
      Last Post: 02-23-2012, 23:17
    2. Drip rings question re straps
      By NickJ in forum General Hammock Talk
      Replies: 5
      Last Post: 11-05-2009, 21:09
    3. Straps and rings
      By Hangin'Yankee in forum Suspension Systems, Ridgelines, & Bug Nets
      Replies: 3
      Last Post: 05-30-2009, 21:26
    4. rings and straps
      By heescha in forum [SOLD/WITHDRAWN] Items no longer available
      Replies: 1
      Last Post: 06-02-2008, 22:34
    5. Slap Straps-Carabineer-Rings
      By Quoddy in forum Suspension Systems, Ridgelines, & Bug Nets
      Replies: 16
      Last Post: 01-11-2008, 13:19

    Bookmarks

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •