DIY 3D printed fully adjustable magsafe ridgeline hanger

[Crazytown3]

If you click on the down arrow in the Download button, you have the option to download the file as .3mf or .stl, rather than the Bambu file. It took me a while to figure that out as I don't own a Bambu printer (yet...)

Thanks, for the life of me I couldn't get it to dl before. Today it worked though. Most likely an error by the operator sitting here typing. Go figure.

[vanis]

Thanks, for the life of me I couldn't get it to dl before. Today it worked though. Most likely an error by the operator sitting here typing. Go figure.

It wasn’t your fault, I added other formats later on your request

[Crazytown3]

It wasn’t your fault, I added other formats later on your request

Well thank you for doing that. I sent the STL files in to my local library, they printed it out and had it done within 2 hours of my request. Total cost to me $0.51

After a little bit of touch up sanding, it works terrific. Thanks again.

[vanis]

Well thank you for doing that. I sent the STL files in to my local library, they printed it out and had it done within 2 hours of my request. Total cost to me $0.51

After a little bit of touch up sanding, it works terrific. Thanks again.

Glad to hear that! There are differences between printers and materials so sometimes some post processing is needed especially for press fit parts like this. But in my opinion, the adjustment is strong side of this design and I wasn’t able to find something similar.

Thanks a lot for feedback! Do you know what material they used? PLA I guess?

[Crazytown3]

Yep, PLA. Their options for printing are basic, but I think that's how they can offer it to the public.

[sloanie]

That's very cool. I don't have a 3D printer, but our local public libraries have several where we can have projects printed out for a small nominal fee, basically the cost of material. I'm going to try it out with them.

Haha! I had no idea our libraries had this. I might have to take a whack at this too. Thanks for the heads up!

[Crazytown3]

Haha! I had no idea our libraries had this. I might have to take a whack at this too. Thanks for the heads up!

It's very cool. I found out maybe a year ago. It's the Salt Lake County Libraries (vs city).