I bought some Zing-It 1.75 MM line to make some tarp ridgelines. I planned to use the same Zing-It to make prusik loops and attach those to the ridgeline, so I could attach my tarp via the prusiks. I read that ideally the prusik loop and standing line should be a different diameter for greatest holding power.
Will having the loops and line the same diameter line be a problem in this application? Has anyone used all Zing-It?
I also ordered some 7/64 Amsteel Blue. It sure looks larger than 7/64 to me just sitting in the box. Is that common? Is the 7/64 diameter measured under tension?
Thanks!
Salty
Bookmarks