Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13
  1. #11
    New Member Zelph's Avatar
    Join Date
    Oct 2007
    Orem, UT
    Thank you everyone for the warm welcome! And thank you Rapt for the great information on fabrics - very helpful. After reading some advice in other forums I took a little trip to Walmart last night and found some beautiful forest/pine green ripstop nylon in the $1 section. I grabbed all 6.75 yards of it up. Sadly it's only 48" wide, a bit short methinks for a hammock, but there's still plenty of other uses I can find for it. I'm almost certain it's DWR. I tried blowing through it and barely felt any breath coming through. I also did the water test over night and this morning about half of the water had found its way through the fabric into the bottle. This fabric seems really light - is there any way to determine if it is 1.1, or 1.9 without being able to weigh it?

    I do have another question. Is polyester a good material for a hammock body? Last night I had also found some 60" OD green polyester in the dollar area and considered getting it too, but wanted to hold off until I knew I could put it to use somehow.

    Thanks again for the help and I look forward to an exciting future of more DIY projects!
    Last edited by Zelph; 10-12-2007 at 11:02. Reason: Added another question

  2. #12
    Senior Member headchange4u's Avatar
    Join Date
    Oct 2006
    Dual Layer WB Blackbird
    OES Cuben
    Polyester is a good material for making a hammock. It normally has a softer feel than nylon and is less prone to stretching.
    “Light thinks it travels faster than anything but it is wrong. No matter how fast light travels, it finds the darkness has always got there first, and is waiting for it." -Terry Pratchett

    Premium Quality, Fresh Roasted Coffee

  3. #13
    Senior Member
    Join Date
    Sep 2007
    Belleville, ON
    Polyester is also more UV resistant. So even though its often slightly weaker initially it'll maintain its strength longer/better if you use it outdoors.

    (Thanks for the thanks guys!)

    I still will say though that the sample route (even if you have to pay a few $) is a really good way to get practical knowledge about fabrics...

    Another way is to go to outdoors stores and read spec sheets and fondle product...

    FWIW most "outdoors fabrics" come in widths from 54"-64", more "home" or residential/clothing fabrics come narrower. (40"-48")

    Avoid anything with cotton in it for outdoors "gear" fabrics. Its heavy, prone to holding moisture and won't last.

Similar Threads

  1. were to buy materials
    By simonmx23 in forum Do-It-Yourself (DIY)
    Replies: 2
    Last Post: 05-14-2012, 06:52
  2. Materials?
    By insub2 in forum Do-It-Yourself (DIY)
    Replies: 4
    Last Post: 04-24-2012, 21:46
  3. looking for some materials
    By Dutch in forum Do-It-Yourself (DIY)
    Replies: 12
    Last Post: 03-07-2010, 09:40
  4. Materials are in
    By Dutch in forum Do-It-Yourself (DIY)
    Replies: 18
    Last Post: 02-04-2009, 17:49
  5. Materials
    By roverdisc1 in forum Do-It-Yourself (DIY)
    Replies: 3
    Last Post: 09-15-2007, 10:52


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts