I am looking for a post with a parts list for us plastics to make a gravity filter.
I have used the seach function to no avil. the thread was about 20 pages long, and the list was provided by angrysparrow.
thanks
I am looking for a post with a parts list for us plastics to make a gravity filter.
I have used the seach function to no avil. the thread was about 20 pages long, and the list was provided by angrysparrow.
thanks
See the announcement here.
This is the parts list -
Everything needed except some rubber washers can be had from US Plastics. These parts are indistinguishable from the ones previously supplied by ULA.
1x - Female Adapter Nylon Fitting 1/4" x 1/4" - Part # 62169
1x - Male Adapter Nylon Fitting 1/4" x 1/4" - Part # 62174
1x - Tubing Clamp accepts tubing up to 1/2 inch O.D. Acetal. - Part # 59200
5ft - Silicon Tubing 1/4" ID x 3/8" OD - Part # 54033
2x - Rubber Washers 7/16" x 1" x 1/16" - obtained locally at Lowes
“I think that when the lies are all told and forgot the truth will be there yet. It dont move about from place to place and it dont change from time to time. You cant corrupt it any more than you can salt salt.” - Cormac McCarthy
Bookmarks