i just ordered 50' of yellow from redden marine yesterday. the discount code still works.
i just ordered 50' of yellow from redden marine yesterday. the discount code still works.
Sorry for chiming in late. There are so many posts on HF these days that I long ago gave up trying to track everything. Every now and then I use a trick that Cannibal taught me, to search for posts that reference me.
So the posting I can find is here; as you will gather, it was a tongue-in-cheek response to a posting TeeDee did that just gave the answer. He just "sees" it; me being the comparative dullard had to work it out from first principles.
Thumbnail sketch...if your hammock is hanging from the ridgeline at 30 degrees, and the suspension line approaches the tree from the ridgeline at 20 degrees, then the total force on the ridgeline is half the body weight. Crank the tension up to make the angle on the suspension line to tree 15 degrees, and the force on the ridgeline is the body weight. Even tighter (if possible, e.g. using a trucker's hitch or something equally insane) to 10 degrees and it is twice the body weight. You get the picture...
Grizz
(alias ProfessorHammock on youtube)
So......my trees are 20 feet apart, the straps attach as high as I can reach up (just over 6 feet), my SRL is 100" of 7/64th Amsteel, and I'm using my new WS attached to the hammock ends and Marlin Spikes 12" down the straps from the tree. Apparently, it isn't suggested that I reef the heck outta that system as tight as I can? If I don't, then my butt gets real close to the ground (not that I have a problem with my butt being that close to the ground cause it's then easy to create my little "swinging action" I like) but am I putting a lot of force on that SRL? I don't see how I can change that setup in my back yard. These are the only trees I have for the hammock here.
Couldn't ya just stick some kind of pound-reading scale in the middle of your SRL to see what it is pulling?
Great forum! Having fun, but have questions also.
Mike
That which does not kill me has made a grave tactical error.
Hi Mike--
I have one pair of good hanging trees in my yard, 23' apart. I guess I'm taller than you, I can get the straps up about 7'. I bring the MS hitch down the webbing a couple of feet, all in all not so different from your trees.
Amsteel 7/64" is pretty strong, and I suspect that even when you "reef the heck" out of the system that when you get into the hammock you pick up a fair bit of angle between the ridgeline and the tree....because every newton of force that causes the angle of the suspension to tree from the ridgeline to be smaller than the angle of hammock to ridgeline under load is a newton you've had to put into the system by "reefing". So unless you're the new X-man "Amsteel Man" with biceps of 1024 strands of Dyneema, you're unlikely to threaten that system.
but only because Amsteel is so strong....take note HH owners....your ridgelines aren't Amsteel....
Grizz
(alias ProfessorHammock on youtube)
i tried putting a scale in the works.it will work but you can not get a reading of a total tight system as when you get in the hammock your weight stretches out the scale,therby allowing sag into the process.you would have to get in then have someone read scale and measure angles of your suspension after the scale had stopped stretching.
...And then one day you find, ten years have got behind you.
No one told you when to run, you missed the starting gun... "TIME" by Pink Floyd
www.linvillegorge.net -Ken's site
www.heavens-above.com -(set your own "home" site)
Bookmarks