I have some 1/4 and some 1/2 hardware cloth. I am about to make some pot stands for my alcohol stoves. Any advice or links showing helpful hints would be much appreciated.
I have some 1/4 and some 1/2 hardware cloth. I am about to make some pot stands for my alcohol stoves. Any advice or links showing helpful hints would be much appreciated.
I would suggest making your pot stand so that it is evenly 1cm inside the pot around the entire circumference.
I also would suggest doing a burn-in once or twice while not standing near it. Most hardware cloth that I have found (at Lowes, etc...) is galvanized, which produces poison gas when burned. So be sure not to inhale those fumes for the first few burns.
"I like going in the woods" - me, just now
CampTalk.net
i mkae mine just like tinny does 5x23
then lock it together.....and crimp the top row in like tinny
It puts the Underquilt on it's hammock ... It does this whenever it gets cold
Knotty
"Don't speak unless it improves the silence." -proverb
DIY Gathered End Hammock
DIY Stretch-Side Hammock
Stretch-Side "Knotty Mod"
DIY Bugnet
here is more info than you could ever possibly want on pot stands...
http://zenstoves.net/PotStands.htm
Bookmarks