Anyone do a DIY of this:
http://www.mollymacpack.com/box.html
Or something like this? Looking to get the sewing machine rolling and I have some extra silnylon around...
Anyone do a DIY of this:
http://www.mollymacpack.com/box.html
Or something like this? Looking to get the sewing machine rolling and I have some extra silnylon around...
How a bout a pack cover/gear hammock from Just Jeff's site...
http://www.tothewoods.net/HomemadeGe...arHammock.html
"Do or do not, there is no try." -- Yoda
I saw the MMG gear box at Mac's house last Friday. It looks pretty nice.
I've had fabric spread on my floor the past few days where I was going to attempt my own version... but haven't yet. Even after looking the MMG in person, I'm having to think a bit too much about dimensions and how to whip the end without leaving a gap for water to get in when the flap is folded over. Also debating material.
I'm leaning towards a smaller sil flap than the MMG uses, and sizing the whole thing as a pack cover as well. However, I was also thinking of making the body out of nylon (not silnylon) so that any water that gets in can drain out... just making the top flap of sil... but then it won't work as a pack cover.
Decisions, decisions.
I may try both ways and see which I like best.
Edit: I just checked out the link that John posted. I'm liking that design and thinking of adding a flap that can fold over the top when used as a gear hammock. That would mean making the whole thing from sil and abandoning my original though of using regular nylon (which I have much more of).
Last edited by rjcress; 12-14-2010 at 20:27.
"I keep telling myself that if I make perfect seams, nobody will believe that I made it... " -JohnSawyer
My outdoor gear review site http://gear-report.com
Gear reviews, DIY / MYOG projects, Outdoor gear discounts, sales and coupons updated daily
I have been using a covered gear hammock for awhile now. It is similar to the Gear Box, but I am sure the sizes and flaps are different. Admittedly, Mac is a gear genius, and when I saw the weighted pocket he uses I “borrowed” the idea and retrofitted mine with it.
Here is how I have made mine in the past.
Materials:
- 1 – Square piece of SilNylon (Usually 60 x 60 ish) I have used 48 x 48 as well, a bit smaller but works
- 1 – 8” x 12” SilNylon
- 2 – 6 foot 2.2 Zing-It woopie slings with an eye on then end
- 1 – 5’ 2.2 Zing-it woopie sling (Ridge Line)
- 1 – 6” piece of Grosgrain ribbon
Directions:
I will use a 60 x 60 piece of silNylon, so the measurements will reflect it. If I am using a different size main piece I divide the width by 3, and use that number as my cover starting point. Example: If I am using a 48” x 48” piece of SilNylon then I would start my cover at 16” (48 / 3 = 16)
1. Pick a side to be the edge of your cover. Measure 20” down the sides, and 24” across the top to form the angle of the cover. Cut out the triangles on each corner
1.5 (Update) Cut 6" corners on the opposite side
2. Put a ¼ rolled hem around the 8x12 pocket. Leave one short edge un-hemmed
3. Sew the pocket to inside of the cover edge
a. Align the center of the cover edge with the center of the un-hemmed pocket4. Sew a 6” Grosgrain loop to the inside center point of the cover edge
b. Do not sew the top of the pocket closed (Don’t know why I had to say that)
a. Note: Align the raw edge of the grosgrain with the raw edge of the cover & pocket. The loop should be towards the inside. When you put your rolled hem around the bottom edge it will include the cover, pocket, and loop. You can sew the loop pointing out after the hem if you want.5. Put a ¼ Rolled Hem around the entire piece of SilNylon (cover and body)
6. Sew a 2” Channel on both side of the hammock body
a. This is creating a simple gathered end hammock (http://www.hammockforums.net/forum/s...ad.php?t=15205)6.5 (Update) Sew a 2" Channel on the end opposite of the cover for the ridge line to go through. Don't close the ends. I usually cut a 6x6 triangle from the corners
7. Gather and Tie off the ends of the hammock body (Make sure to wrap the cover around the hammock body to prevent water from leaking in.
8. Attach your 6’ woopies to the ends of your hammock body using a Larks head
a. Note: I usually feed the woopie through the channels, loop them around the body once or twice and then tighten the loop in the end. This way I don’t have to tie off the ends separately.9. Attach the ridge line over each woopie sling, and adjust it to preference
10. Done
I usually make a bag out of the scraps, but have been toying with just packing it all into the pocket.
Last edited by WLMiller54; 12-15-2010 at 13:39. Reason: Update directions
- William -
How can a young man keep his way pure? By living according to your word. - Psalms 119:9
I know this is an old thread but it sure has been super helpful. Thanks for sharing your work and pattern. I made this today and am super happy with it (and the color.) Please excuse the farm kitchen floor. I have been busy sewing gear!
20170517_112906.jpg
--
moniquews
Adults are obsolete children. ~Dr. Seuss
hmm.. don't know if this will help- I made a rought approximation of the MMGB with 1 yard of calendered nylon(-scrap suitable for prototyping)
Put channels along the same 2/3rds of both of the long sides, and a hanging/ridgeline channel along the short side, that connects to the two other channels ...if you can picture that.../
ran 10 ft of 550 cord thru the short channel, about 3 ft of shock cord and toggles in each of the 2/3 channels
Cinched up the short sides, and tied paracord ends to hammock suspension, then discovered the ridgeline channel -also- gathers up when weight is applied, so have added a couple of stitches to keep it stabilized at not quite max, so flap drops over ridgeline and covers both the gathered ends. sort of looks like a hammock "sporran", and is handy for rummaging at night when in hammock, as bug net is over everything.
hope that helped- still a bit of work in progress...KM
ps WLM beat me to it- tho I did not taper flap ends or put in weighted pocket...yet!
Last edited by KerMegan; 12-15-2010 at 11:15.
You guys are very close to cloning the Gear Box!
The ridgeline should be 4' long, whether or not it passes through a 5' channel. That is what gives the Gear Box it's depth. It also gives the box top some bagginess at the ends, so it can cover the hammock ends.
The advantage of running the ridgeline through one side channel is that it keeps things from falling out.
Good work!
- MacEntyre
P.S. Isn't it cool that the whole thing can be made from a single piece of fabric? I love it!
- MacEntyre
"We must, indeed, all hang together or, most assuredly, we shall all hang separately." - Ben Franklin
www.MollyMacGear.com
Oh yeah, there is another channel on the opposite edge of the hammock body for the ridge line. Thanks Mac, thats what I get for thinking through the steps without looking at the finished product. This set-up is easy to make, and works great. Mine has ridden out a couple of storms with very little water getting in. Plus every one (including ground dwellers) have asked for them. .......
Which reminds me. When you are tightening your end straps to the gear hammock, mack sure the cover is pulled over the inside of the wraps or you may get water coming in from the edges.
(Updating My post above)
- William -
How can a young man keep his way pure? By living according to your word. - Psalms 119:9
- MacEntyre
"We must, indeed, all hang together or, most assuredly, we shall all hang separately." - Ben Franklin
www.MollyMacGear.com
Bookmarks