Originally Posted by
bigbamaguy
Sam:
IMHO, I would do the corner suspension points and full length side channel. My reason for saying this is: when I hung the UQ using the channel suspension it had a tendency to gather on the shockcord suspension and leave a larger air gap under my butt. This lead to a slight case of CBS. When I hung it only using the corner suspension method I would get drafts in on the side of the UQ causing my shoulders and sides to get cold.
To combine both systems I used Triangle Thingy's from Paul at AHE to suspend the UQ from the corner attachment points,then tide a loop in some shockcord around the foot end attachment point, ran shockcord completely through the channel, through a cordlock and then made a loop around the head end corner attachment back to through the cordlock so I could adjust the side tension. When I combined the two systems I was able to alleviate all drafts from the UQ.
If you need pictures I have some and will post when I get home.
Bookmarks