A tighter fit between wood and steel would solve most, if not all of this.
That said, that big honkin' hole through the middle of the 2x4s makes me a little hinky.
A tighter fit between wood and steel would solve most, if not all of this.
That said, that big honkin' hole through the middle of the 2x4s makes me a little hinky.
Dave
"Loneliness is the poverty of self; solitude is the richness of self."~~~May Sarton
I agree on the tighter fit. I think I'll try the next smaller bit for my next stand, or for a new set of legs for this one, whichever comes first. I may have to use a mallet or something to assemble/disassemble it, but I think it would be worth it.
As to you're second point. . . So far the holes through the 2x4s seem to be the least of my worries. I'm definitely keeping an eye on them though and watching for any signs of cracking or anything.
"A little hinky", huh? I love words and language and stuff. That's a new one to me. Is it something that's common where you are in Oklahoma, or a family expression, or what?
I didn't put the holes all the way through on that stand I posted about. I made a hole maybe 1" deep, maybe a bit less, can't remember. That was with a single 2x4 upright. It never gave me any problems. The hole diameter was just barely large enough enough to fit the fence post in and remove without problems. I also had a wood screw that came in from the side into the bar without really penetrating the metal. It was enough that I couldn't easily get the bar back out without loosening the screw.
That top bar took all of the load. After 2 years out in the elements, that untreated wood was getting really questionable. But it still never flexed when I got in.
I wanted my top bar longer than 10 feet. So my 1st attempt( Risk hammock stand ) had a joint allowing for a 4 foot extender. One day I got in and the bar bent at the joint! Nearly dumped me. When I made the second stand, I added a shorter section of fence post upright, which was just big enough to fit over the other bar and the joint. From then on, it was absolutely bomb proof.
Wow cool idea. I had seen some heavy duty saw horse brackets at home depot the other day and thought hammock stand. but wasn't surehow it would work. basically you would need 4- eight foot 2x4's and a 10' or so 2x4 or 2x6 and make it the same as this one. but then I do like the rabbit ear stand so i made one of those.
My question is about the pole length. 10' just doesn't seem long enough, is it? I thought you wanted that 30 deg angle for the best lay. If you already have a 10' hammock (give or take a little) you need more spacing. The stand I made for in the yard (will have to get pics tomarrow), the top is about 14' apart. The rabbit ear stand I made, I think was about 12' and seemed to close.
I'm a member of PETA!!!!
People
Eating
Tasty
Animals
According to the Hammock Hang Calculator it will work.
Look up before you hook up!!
Originally Posted by body942
Me big. Me like hammockgear burrow. Long. Problems no. People good.
Just looking at your pics and there seems to be nothing preventing lateral movement.
ie: if you lay lie in the hammock and there is movement/swing from <=head to toe=>.
The pole being through the timbers would be some benefit, but I would personally want some cross bracind, or a tie out from each end to a solid object/stake-out.
Just an observation mind you ( My father-in-law does call me OVERKILL BILL ! )
I dream of a better tomorrow, where chickens can cross the road and not be questioned about their motives.
For the hammocks I have at the moment, it's plenty of space. I didn't write down the exact measurements, but my HH Expedition and Grand Trunk Ultralight both measured about 9 or 9.5 feet (give or take a bit) from end to end (that would be the ridgeline length on the HH and the overall length on the GT). Give 'em some slack to get the right hang, and they fit fine. My girlfriend's Clark is even shorter, and worked out very well. If I get or make a longer hammock at some point, I should be able to get couplers and add short sections of pipe on to both ends to make the ridge pole long enough. I haven't had much of a chance to fiddle with it recently, but I plan to get out and tweak it a bit and hang from it this weekend.
Bookmarks