Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Member
    Join Date
    Sep 2010
    Location
    Tupelo, MS
    Hammock
    DIY DL 1.1 Hennessey Clone.
    Tarp
    Winter Dream Clone
    Insulation
    Pads & DIY UQ
    Suspension
    Whoopies!!!
    Posts
    58
    Images
    8

    caternary cuts - How to???

    OK - in the middle of a tarp fiasco (remind me to bind up all the excess material before I sew a side to the ridgeline again!).

    What are the general rules of thumb for depth of cat cut and also how do you do them? Freehand drawing? Or is there some tool here that you can run and print out a pattern?

    Need a pattern for 6' and for 3 1/2'.

    Thanks, FH

  2. #2
    Senior Member oldgringo's Avatar
    Join Date
    Aug 2009
    Location
    On the Rez
    Hammock
    Varies
    Tarp
    GargoyleGear Ogee
    Insulation
    UQ-varies w/season
    Suspension
    Dutchgear
    Posts
    7,337
    Ask, and ye shall be overwhelmed.;

    http://www.hammockforums.net/forum/s...light=catenary
    Dave

    "Loneliness is the poverty of self; solitude is the richness of self."~~~May Sarton

  3. #3
    Member
    Join Date
    Sep 2010
    Location
    Tupelo, MS
    Hammock
    DIY DL 1.1 Hennessey Clone.
    Tarp
    Winter Dream Clone
    Insulation
    Pads & DIY UQ
    Suspension
    Whoopies!!!
    Posts
    58
    Images
    8

    Four Minutes!

    Thanks for the quick response!

    Now - how do you transfer that to a pattern!

    The clock is ticking...Go!

  4. #4
    Member
    Join Date
    Sep 2010
    Location
    Tupelo, MS
    Hammock
    DIY DL 1.1 Hennessey Clone.
    Tarp
    Winter Dream Clone
    Insulation
    Pads & DIY UQ
    Suspension
    Whoopies!!!
    Posts
    58
    Images
    8
    OK - I took the spreadsheet and ran it out for every 1% instead of 5% to see where the more even measurements would be to help plot them on some larger graph paper.

    Basically - I can do a 1/2 cat curve of 18" for the 3.5 foot and 3' for the 6' curve the fold it over to do the other side.

    Is there a way to do this with excel?

    Thanks, FH

  5. #5
    Senior Member Cold Butt Stephen's Avatar
    Join Date
    Nov 2010
    Location
    Richmond, VA
    Hammock
    SL 1.1 oz DIY
    Tarp
    DIY Sil Hex
    Insulation
    Frankenpad
    Suspension
    DIY whoopie slings
    Posts
    149
    Images
    14
    I used a piece of cardboard and used a tape measure to measure the corresponding length and height measurements. It is a pain in the butt, but it worked.
    ------------------------------------------------------

    CBS (Cold Butt Stephen)

  6. #6
    Senior Member bloomgorge's Avatar
    Join Date
    Feb 2010
    Location
    Detroit, Mi
    Hammock
    3xWBBB1.0dbl, XLC, DIY
    Tarp
    superfly, maccat d
    Insulation
    DIY UQ/TQ/UGQ/HG
    Suspension
    whoopies, E.trunks
    Posts
    1,204
    just use a piece of string, one end at each tie out, let it hang and keep pulling it tight until the center of the string is at 6" from the edge. tape it and then trace the line.

  7. #7
    Senior Member Redoleary's Avatar
    Join Date
    Feb 2009
    Location
    Pennfield Twp, MI
    Hammock
    DIY gathered end
    Tarp
    Hinterland gear
    Insulation
    down bag
    Suspension
    strap & E.T.'s
    Posts
    3,910
    Images
    70
    Go to about the 5min mark in this video and he explains a very simple method to put some hollow in the edges... its not an actual Catenary but its good enough.

    Good luck,
    RED

    My Youtube Channel

    Deep peace of the running wave to you.
    Deep peace of the flowing air to you.
    Deep peace of the quiet earth to you.
    Deep peace of the shining stars to you.
    Deep peace without end to you.
    adapted from - ancient gaelic runes

  8. #8
    Senior Member SmokeHouse's Avatar
    Join Date
    Apr 2009
    Location
    Arkansas
    Hammock
    my 11' ers
    Tarp
    many of my tarps
    Insulation
    yeti, Incubators
    Suspension
    DIY Whoopie
    Posts
    1,211
    Images
    49
    I took 11' cardboard, attach string on each end, drop the sting in the middle to desired length, trace it, cut it, pattern complete. The pic below is a 5" cat cut... what I prefer...
    Attached Images Attached Images

  9. #9
    all secure in sector 7 Shug's Avatar
    Join Date
    Oct 2007
    Location
    Minnesota
    Hammock
    I have many so....
    Tarp
    Blackcrow DIY Tarp
    Insulation
    FrankenquiltUQ/Pod
    Suspension
    Whoopie Slings
    Posts
    23,420
    Images
    62
    I free-handed with dotted lines. It worked.
    Shug
    Whooooo Buddy)))) All Secure in Sector Seven

  10. #10
    Senior Member miisterwright's Avatar
    Join Date
    Jan 2008
    Location
    Portland,OR
    Hammock
    WBBB
    Tarp
    OES 12 x 10
    Insulation
    JRB Mt.Washington4
    Suspension
    Whoopie/UCR
    Posts
    376
    I use "the string method", but I use a length of that ball chain used for dog tags and other necklace type things. I think makes a more consistent curve than string because of it's weight and resistance to kinking.

    You need a big blank wall to use this method. Not as easy to find in some homes as you'd think. And make sure if you're working with something thin like untreated 1.1 that you don't use a sharpie to mark the curve without something behind it. Your wife may feel the sudden need to express her feelings on the subject.
    ~Bryan

  • + New Posts
  • Page 1 of 2 12 LastLast

    Similar Threads

    1. Calculus and caternary cuts/Hammocking...
      By michgan241 in forum General Hammock Talk
      Replies: 6
      Last Post: 05-15-2014, 18:03
    2. My Caternary Top Cover
      By patrick_the_fat in forum Do-It-Yourself (DIY)
      Replies: 4
      Last Post: 03-20-2013, 21:37
    3. How important are caternary cuts?
      By appelboom in forum Do-It-Yourself (DIY)
      Replies: 7
      Last Post: 01-16-2013, 11:33
    4. caternary-cut edges
      By The Wolf in a Hammock in forum Do-It-Yourself (DIY)
      Replies: 5
      Last Post: 01-16-2012, 18:55
    5. New Speer 8X10 Caternary vs MacCat
      By lyleb in forum Weather Protection
      Replies: 6
      Last Post: 03-13-2008, 23:15

    Tags for this Thread

    Bookmarks

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •