Results 1 to 9 of 9
  1. #1
    Senior Member DiscoveryDiver's Avatar
    Join Date
    Dec 2010
    Location
    Kanagawa, Japan
    Hammock
    Eno, HH, DIY
    Tarp
    Superfly
    Insulation
    Winter Incubator
    Suspension
    whoopies
    Posts
    470

    Sides of Hammock...rolled hems or bias tape?

    I'm just about the start cutting into the mountain of fabric I've imported for my hammock projects.

    I feel a mixture of and

    On the hammock sides, I see a lot of folks do rolled hems of varying widths...is bias tape also popular? I see it pre-folded at the fabric stores here, and it looks rather professional, also in different widths. I bought some to play with in the machine and it makes really nice edges, more steady-looking than my rolled hem for sure

    However, I do plan on sewing on zippered bug netting in the near future, if not immediately, so perhaps the bias-taped edges would be too thick and interfere with sewing on the zippers?

    Thoughts?

  2. #2
    Senior Member packeagle's Avatar
    Join Date
    Apr 2010
    Location
    Saginaw, Michigan
    Hammock
    DIY Table Cloth/ Jerry 5
    Tarp
    11x12' Hex Sil
    Insulation
    Various UQ/TQ
    Suspension
    Webbing or Etrunks
    Posts
    1,210
    Images
    18
    My Hennessey has some sort of tape on it. It has the netting and main hammock body sandwiched in the fold of the tape. So, if adding the net now it would work fairly well IMHO. If adding in the future may have to take the tape off first. Hope this helps.

  3. #3
    Senior Member Jsaults's Avatar
    Join Date
    Sep 2009
    Location
    Pittsburgh PA
    Hammock
    HH, CJH NX-250, WBBB 1.7 dbl
    Tarp
    Std, Hex, or WBSF
    Insulation
    Burrows&Incubators
    Suspension
    Poly web w/AHE buc
    Posts
    1,494

    Packeagle's response got me to thinking.

    On the HH two dissimilar fabrics, with different yarns, weaves, and stretch characteristics are joined. Having a bias tape reinforcement is probably a good idea in such a situation.

    If the edge of the hammock you sew, er, inject is a simple edge with no net attachment I bet that the rolled hem would be just fine. Of course, if I was the fabricator I would use bias tape too (Disclosure: I am a "Heavy Hanger").

    Jim
    with no real-world experience in sewing a hammock!

  4. #4
    Senior Member WV's Avatar
    Join Date
    Feb 2008
    Location
    southeast WV
    Hammock
    DIY
    Posts
    4,816
    Images
    208
    Why not jump ahead to the zipper option, replacing rolled edge or bias tape? If you're adept at putting sliders on coil zippers, just separate a #3 zipper and put half on each edge of the hammock. When you're ready you can put zipper halves on a bugnet and attach with sliders on both sides. (Fiddle something at the ends. )

  5. #5
    Senior Member gargoyle's Avatar
    Join Date
    May 2009
    Location
    Muskegon MI
    Hammock
    G-Bird II/Bridge
    Tarp
    Ogee tarp
    Insulation
    DIY TQ DIY Down UQ
    Suspension
    whoopies
    Posts
    6,686
    Images
    45
    Doing several diy's myself..and then trying to mod the standard hammock into a zip-net style, I learned that it would be easier to incorporate the zippers into the hems from the start. Takes more thinking from the start, but beats trying to do it later. Plus, if done right, it will look cleaner.
    Joining it all together with bias tape/folded grosgarin will be even nicer. Possibly stronger?
    Again this process will take some fiddling, as your now trying to sew three things (fabric, zipper and grosgrain) together at one time. Pretty tricky for a first timer.
    I recommend lots of pins..
    On my g-bird hammock, I used strips of camo fabric about 3" wide, folded it to make my own edge binding and sewed that on. Worked good and added a bit of camo detail around the hammock. I think it looks cool...but I'm biased

    biased, bias tape, get it.... hahrhahahr
    Ambulo tua ambulo.

  6. #6
    Senior Member Ramblinrev's Avatar
    Join Date
    Apr 2008
    Location
    Milton, PA
    Hammock
    Hennessey Explorer Ultralight
    Tarp
    Hennessey Hex
    Insulation
    HH Super Shelter
    Suspension
    ring buckle
    Posts
    7,945
    Images
    101
    Bias tape accomplishes two things. It finishes an edge, giving a nice clean look. It prevents the edge from raveling _under normal use_. I am not convinced the edge of a hammock is normal use given the slipping and sliding that occurs loading and unloading. I haven't seen the HH zip models, but the old models had no excess wear on the edges and I don't think that is bias tape anyway. I would not replace a rolled hem on a hammock edge with bias tape except under two conditions. 1- You rolled the hem to start with. Which kind of defeats the purpose. 2- you carefully sear the edges to seal the weave. Which is a huge pain the tuckus in any event.

    Bias tape stretches and is very pliable and flexible. It is not intended for heavy use applications. If you want to replace the hem with an edging you would be better off using a lightweight straight weave ribbon. But even then I think a rolled hem is the preferred choice in my mind.
    I may be slow... But I sure am gimpy.

    "Bless you child, when you set out to thread a needle don't hold the thread still and fetch the needle up to it; hold the needle still and poke the thread at it; that's the way a woman most always does, but a man always does t'other way."
    Mrs. Loftus to Huck Finn

    We Don't Sew... We Make Gear! video series

    Important thread injector guidelines especially for Newbies

    Bobbin Tension - A Personal Viewpoint

  7. #7
    Senior Member DiscoveryDiver's Avatar
    Join Date
    Dec 2010
    Location
    Kanagawa, Japan
    Hammock
    Eno, HH, DIY
    Tarp
    Superfly
    Insulation
    Winter Incubator
    Suspension
    whoopies
    Posts
    470
    Thanks, everyone...many words of wisdom to ponder...!

  8. #8
    Senior Member gargoyle's Avatar
    Join Date
    May 2009
    Location
    Muskegon MI
    Hammock
    G-Bird II/Bridge
    Tarp
    Ogee tarp
    Insulation
    DIY TQ DIY Down UQ
    Suspension
    whoopies
    Posts
    6,686
    Images
    45
    Yes rev. Rolling the hem is advised. Then apply your grosgrain/edging.
    The roll does not need to be large, just enough to keep the fraying in check.
    Ambulo tua ambulo.

  9. #9
    Senior Member GvilleDave's Avatar
    Join Date
    Feb 2009
    Location
    Greenville SC
    Hammock
    DIY Camo Cocoon
    Tarp
    Tricked out SWT
    Insulation
    DIY 4 layer IX
    Suspension
    straps & buckles
    Posts
    517
    Images
    185
    Even on my hammocks w/ attached bug screens I just roll hem the fabric and the noseeum and either stitch them together or to a zipper. Even the noseeum seems to make a durable connection when it is 3 layers thick in a rolled hem.
    Last edited by GvilleDave; 02-14-2011 at 09:54.

  • + New Posts
  • Similar Threads

    1. Reaching out of both sides of the hammock?
      By PapaSmurf in forum Dream Hammock
      Replies: 3
      Last Post: 11-12-2014, 13:51
    2. Can I use bias tape to finishing the edges of my hex tarp?
      By streamline in forum Do-It-Yourself (DIY)
      Replies: 6
      Last Post: 08-26-2011, 04:41
    3. Staking out hammock sides
      By Buffalo Skipper in forum General Hammock Talk
      Replies: 6
      Last Post: 06-21-2011, 07:33
    4. Video: How To Make DIY Bias Tape
      By creativeKayt in forum Do-It-Yourself (DIY)
      Replies: 39
      Last Post: 05-17-2011, 00:50
    5. Stitch for Hammock Hems
      By Redtail in forum Do-It-Yourself (DIY)
      Replies: 4
      Last Post: 06-28-2007, 20:30

    Tags for this Thread

    Bookmarks

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •