I had a slight mishap last night and ended up with a few small burn holes in my Chameleon (1.6 hexon).
Can anyone recommend a good way to patch this? I’m kinda sick about it.
19A8D71C-CE3F-4605-B27D-FDD13381B167.jpg
I had a slight mishap last night and ended up with a few small burn holes in my Chameleon (1.6 hexon).
Can anyone recommend a good way to patch this? I’m kinda sick about it.
19A8D71C-CE3F-4605-B27D-FDD13381B167.jpg
Tenacious Tape if it is not in an area that is under stress...
https://www.rei.com/product/783045/g...pe-repair-tape
Talmadge
"GroundHog"
Where are those holes located on the hammock?
Sent from my VS996 using Tapatalk
Also I would call Dutchware and ask them what options you have... They always seem to be more than happy to help from what I've read.
Sent from my VS996 using Tapatalk
It’s at the foot end, on the other side from my feet, fortunately.
21FC9CC8-FFB2-4A54-B5A7-E9772D283F34.jpg
I’ve emailed Dutchware, and I can hardly wait to hear back from them. Thanks for all the suggestions!
That might not be so bad then since I doubt it gets much stress there, definitely wait to hear back from them but I'd imagine taping it like Groundhog mentioned would work just fine. Good luck to ya, hope it doesn't keep you out of a hammock for too long... I hear it's bad for your healthOriginally Posted by Malcolm
Sent from my VS996 using Tapatalk
Maybe dutch will notice it and pop in for a comment, he is pretty awesome
Sent from my SM-G950U using Tapatalk
Dutch can probably get it fixed up if you don't have any sewing abilities.
Don't let life get in the way of living.
Tenacious tape applied as factory recommended. I have used Tenacious Tape for years now and it has worked great, always does the job as long as I follow the instructions.
Yep, if it is in a low-stress area, just apply a ROUND patch to BOTH sides of the fabric and it just might outlast the hammock.
Posting Permissions
Reply With Quote
Bookmarks