I just wanted to share with you how i set up my hammock.
Not having tons of money laying around i looked at a way of getting treehuggers and suspention as good and cheap as possible.
Thats when i found this. (2 x 11.5' webbing with buckles for $4)
For me it becomes a treehugger and suspention in one and for a reasonable price.
This can succesfully be used as is but what I did was cut the buckle off about a foot in and sew a loop on the end. Same thing goes for one side of the remaining part of the webbing, thus having two pieces of webbing each whith a loop on one side.
(This might be overshare but..)
The setup is now to have the short piece with the buckle on the hammock and the long piece around the tree and down to the buckle.
This makes a very quick and easy setup of my hammock.
Time will tell how the buckle will affect the webbing but after one full night an several test hangs I see no abrasion. If so this could be done with no buckle.
Hope this is to use for someone.
Please rate and comment!
Bookmarks