After my last trip, I was wanting to do this to both my head and foot end.
The grosgrain/burn hole is very easy. I put one at each end of the channel so I can adjust the overall tension and the proportion of bungee to lighter cord, then I tie each end off with a loop that slips over the hammock whipping. If you don't whip the ends (just use a channel) they could be tied to the suspension rope or a ridgeline. Just to be accurate, I know I suggested grosgrain - and I think it would work - but I used 3/4" long pieces of 1/2" wide lightweight polypro webbing on my insulated hammock with side stretch.
Knotty, finailly got mine finished today. I used a combination of small grosgrain rectangles sewed onto the channel, then put button holes on the grosgrain. Had fits trying to do button holes in my 1.1, so the grosgrain helped reinforce things.
I'll try to post of some pics of my Knotty Stretch Side Hammock tomorrow. Thanks for all the information.
I'm like Knotty in that I like to switch angles when I roll over because I only can sleep on my side. So I would go with the two "footboxes" at the foot end.
"Life is a Project!"
My first D.I.Y. hammock, and its a Knotty Stretch Side. Thanks again Knotty for all the great information. It works like a charm. Click on a picture to make it larger in PB.
Grosgrain reinforced buttonhole sewn on.
Knotty's Stretch Side Hammock weight, 8.5oz w/102" of zing-it for a 100" structural ridge line, mason's twine for gathered end, 2 bungie's one ea. side, & 2 Dutch Dynaglade whoopie slings. I made my hammock a little longer at 10'-8" cut.
All stretched out and ready to provide some comfort. I slept in it last night, perfectly comfy. You can see it all fits perfectly inside my ZPack tarp.
A look at the Stretch side bungie's. I may take the left side out completely as I don't sleep in that direction. Maybe not, will decide later.
Gathered End is Warbonnet style. In my structural ridge line I tied a perfection loop in each end of the Zing-it. Then pulled through the center of gather and ran my whoopies though the perfection loops. I used masons twine for the initial gather.
Total System-Knotty's stretch side hammock, ZPacks tarp, Dutch buckles & straps, Stuff Sacks (Thermolite Reactor stuff sack used for hammock) & 6 Lawson Ti Stakes. Total weight 21.6oz. The pic on the right is Dutch's new buckle style. I used the bungie to wrap around the whoopie loop to provide a little more security to keep the loop from slipping off. It works but I don't think its needed.
And a little extra props to Knotty. My wrist gauntlets. I added a pocket on top for a chemical heat pack and put a dart in the palm area to make a more snug fit for my hand. I used an old fleece pullover I had for my first set, off to the fabric shop to pick up some heavier fleece now.
Last edited by BearChaser; 10-22-2011 at 16:49.
BC - Thanks for documenting your project. Based on your weights it looks like you used 1.1oz ripstop. One of the ones I made was in what looks like the same 1.1oz woodland camo. I got mine in a group buy from Scott Littlefield quite a while back. Did you get it from his DIY supply store? 21.6oz for the whole kit is pretty sweet. Also glad to see you customized the wristies to your own needs.
Knotty - Yes its the 1.1oz from DIY gear supply. I also got 5 yards of the 1.5oz. but it wasn't as wide as the 1.1, so I went with the lightest to test it out. So far so good. I was very pleased with the weight. The weight I listed above was everything but my quilts & sit pad that I occasionally use for under the calf area.
My entire system for sleeping and cover includes tarp, tie outs, stakes, hammock, pillow, slings, straps, sit pad, and 3 season top/bottom quilts on the Dolly Sods hang weighed 6.77 pounds, it now weighs in at 4.425 pounds.
And for an update, night 2 in the KSS Hammock even better than night 1. I think in the back of my mind I was waiting for something to give on the first night, last night I didn't even think about it. I have also been using regular blankets, and thanks to the bungie at the foot area the blankets stay in the hammock with me. I also put a buttonhole in the bottom of my little stuff sack and passed the whoopie sling through it. Now I don't have to worry about loosing my stuff sack or stuffing wet slings down in with my hammock.
Last edited by BearChaser; 10-23-2011 at 14:47.
BC - 1.1oz fabric still scares me a bit. I had written it off after discovering some stressed areas in a previous 1.1 gathered end I made. Keep me posted on how yours holds up. All you ultra light hikers keep making me rethink things. Next thing you know I'll have a Cuben tarp.