I wanted to gather some group input on ideas of how to do up my suspension system.

Hammock : Claytor Jungle /w orignal webbing straps
Webbing : 50 feet green tubular webbing - 4400 lbs rated
Rings/Biner: 4 Climbing rating oval biners. 4 Non-Climbing rings
Ridgeline : 50 foot camo 550 cord, tightened by nite ize figure 9's
Tarp : Stock Claytor
Stakes : Gutter Nails

I want a very quick and easy way to adjust for length between the trees. I have already purchased all above equipment, discontinung use of non-climbing rated equip for load bearing. Should be able to span 15 foot+, my hammock need at least 15 feet for a good hang. I want something that take a lot of the knots out of the system so to speak. Thought about tying prussiks in the webbing every so often, and clipping into them...ideas?

Also I want to avoid cutting up my webbing to much. I would like to make just two lengths out of the tubular webbing-25 ft each, possibly replacing the stock claytor webbing.
Also should have a easy way to attach tarp if possible. Right now using stock claytor cord, with night ize on side tieouts.

Look forward to hearing everyones input/ideas. Thanks in advance.