Here is the latest UQ i made it's for Dutch comes in at 17.5oz 4 inch of Loft it's 40x48 with 3 inch baffles and Differ. cut should be good down to around 0F
i used 10.5oz of 800 fill down there is 1 oz per chamber in the 4 outside chambers (2 on each side) and a little over 1.5oz in the center 4 chambers for Max core warmth and loft so no CBS with this bad boy
used very light Cuben i think the .51 stuff to be honest i didn't like sewing it i ran into a few problems with it coming a part at stitch points should be an easy fix with some Cuben tape
overall it came out nice the only thing i don't like is the channels for the suspension .... i should have used Grossgrain but ti's more for looks than anything (OCD)
Bookmarks