I hope this can stay in the general forum.
Ok so I like to never figured out how to do this and still wouldn't say I'm great at it but this is for anyone that maybe wants to try this but don't know where to start.
I am using Lash-it 1.75 mm which I heard was about the hardest stuff to do this with after I had already bought a roll :doh:
Here is a eye loop with the end buried back into it's self, the splice like a whoopie, and I pulled the tapered end from making the whoopie splice back through it's self.
Ok so for this small cordage I like to of never figured out how to pull the cord through it's self but SlowBro finally put it in terms that I could understand.
Use fine gauge stiff wire bent in half and start at the OUT point, slip the bent end of the wire down the middle and exit the IN point. Place the free end you want to bury in the bend of the wire and pull the wire back out which will bury the free end nice and neat.