Hammock - stock webbing suspension for a WBBB with 2 biners
Tarp - figure 9 biners at the coners, continuous ridgeline with figure nine and knotbone, 2 mini S biners to attach tarp to ridgeline prussics.
I'm all about the convenience and quick setup/take down.
I've got what in my opinion is a pretty sick setup. It's super-lightweight and is entirely hardware-free. My hammocks UCRs have a diamond knot on the end of them, and my Dynaglide treestrap extenders have an adjustable eye on the end like a soft shackle. My tarp is attached to my hammock suspension via 1.2mm Techline prussics with an integrated soft shackle. It's the most integrated, lightest setup I've heard of.
In the words of the Great Mackey, "Never lose your elevation!"
Bit of a newb myself... But I use 2 carabiners.
Tree strap through its own loop. Tie a cord onto the strap with a sheet bend. Run it to hammock through biner and tie it to itself with a taught line hitch.
Sheet bend is crazy easy to tie, taught line hitch isnt bad... Adjustible on both ends, and cheaper/lighter then a lot of other options.
Do you have a picture of your setup?Originally Posted by Chrisman2013
Hammock = 2 toggles
tarp = truckers hitch = no hardware
Never let schooling get in the way of your education. -Mark Twain
Two Dutch Clips on the hammock suspension.......a knot bone, figure 9 and a couple s-biners on the tarp ridge line.
Jay
Posting Permissions
Reply With Quote
Bookmarks