I am going to attempt my own bishop bag. So i was wondering if anyone had any advice for a newb for putting a grommet into ripstop nylon?
I am going to attempt my own bishop bag. So i was wondering if anyone had any advice for a newb for putting a grommet into ripstop nylon?
Be gentle. If you hammer them too hard, they can cut all the way tru the fabric.
A simpler but not as good looking option is to just burn a hole with a soldering iron.
Knotty
"Don't speak unless it improves the silence." -proverb
DIY Gathered End Hammock
DIY Stretch-Side Hammock
Stretch-Side "Knotty Mod"
DIY Bugnet
For mine I made a small square with grosgrain (1/4") by sewing 4 pc together to make the box. Sewed that to the bottom of the bag, then used a blade to cut an "X" into the ripstop inside the newly sewn in square. The Legs of the X each went to each corner of the square. I folded the ripstop inwards, and sewed that down... perfect square hole that can't expand cause its reinforced.
Hey dieseldeathstar,
I used a plastic grommet in a hammock bag (Sil-Nylon) after I tore out a metal one in a brand new AHE Hammock Bag by accident (long story) It was an easy fix and has held for the last two years.
Where can you get plastic grommets? I looked over all the usual places a few weeks ago and had to settle for brass.
"Dyslexic knot unravellers of the world, UNITE!"
+1on re-enforcing with grosgrain ribbon.
My wife does my thread injecting, so, I'm not speaking from experience. Her machine has an automatic button hole maker. That is how she makes the holes the bottom of our bishop bags..........2 cents.
I think that I shall never see
A poem as lovely as a tree.... Joyce Kilmer "Trees"
Hey Gra_factor,
I got the plastic grommets at Canadian Tire. (Canada only) I believe Wal-Mart carries them in the camping section. If you can't find them, I can send you some.
Bookmarks