Page 1 of 2 12 LastLast
Results 1 to 10 of 15
  1. #1
    Senior Member bkautzman89's Avatar
    Join Date
    Dec 2011
    Location
    washington
    Hammock
    WLLO
    Tarp
    WL Tadpole
    Insulation
    AHE NR UQ
    Suspension
    whoopies
    Posts
    200

    breaking strength

    i picked up some braided polycord from homedepot and it has a breaking strength of 50lbs. i was thinking of using it to replace the cord that is in my gathered end hammock. i'll be doubling it up. do you think it'll hold? i don't weigh much. i feel like it should since it's braided...but who knows. if not...then i have some good cord for something.

  2. #2
    Senior Member bkautzman89's Avatar
    Join Date
    Dec 2011
    Location
    washington
    Hammock
    WLLO
    Tarp
    WL Tadpole
    Insulation
    AHE NR UQ
    Suspension
    whoopies
    Posts
    200
    also, i plan on attaching some descender rings with it(if you guys think it'll hold) to my other hammock that has a fixed loop at the end as part of the hammock. it's a Grand Trunk roatan if you want to see what i'm the fixed loop thingy.

  3. #3
    Senior Member bkautzman89's Avatar
    Join Date
    Dec 2011
    Location
    washington
    Hammock
    WLLO
    Tarp
    WL Tadpole
    Insulation
    AHE NR UQ
    Suspension
    whoopies
    Posts
    200


    not sure if the picture will work, but this is the best i could find.

  4. #4
    Senior Member DemostiX's Avatar
    Join Date
    Jan 2011
    Location
    Like Lewis & Clark: Wintrin' o/t Columbia again: PDX
    Hammock
    Clark w 2QZQ mod,Tropical, NX;Nano
    Tarp
    Clark micro
    Insulation
    Major down
    Suspension
    7/64 SK75 +strap
    Posts
    2,322
    Images
    13
    Yes, each leg has that breaking strength. Those concerned with safety would insist on a factor of 11-15. So you would be at 6 to 9 lbs per leg.

    In short: Return it and go to a boating supply store for just the amount of 1500lb breaking strength you need. There are no bargains here: strength is proportional to mass and so is price.

  5. #5
    Senior Member
    Join Date
    May 2011
    Location
    Seattle
    Hammock
    Dream Hammock
    Tarp
    HG Cuben Camo
    Insulation
    HG Incubator
    Suspension
    Whoopies
    Posts
    1,408
    Take it back & get a couple of whoopie slings. About the same weight & 1600 lbs of strength. Cost is about $15 or $20, plus they're way more adjustable!

    Even with the type of hammock that you show, you can do a whip around the end & it'll work.

  6. #6
    Senior Member bkautzman89's Avatar
    Join Date
    Dec 2011
    Location
    washington
    Hammock
    WLLO
    Tarp
    WL Tadpole
    Insulation
    AHE NR UQ
    Suspension
    whoopies
    Posts
    200
    alright. well i'm going to keep it because i'm sure it'll be good stuff to have around the house for whatever. maybe even as a line for my tarp? but whoopie slings it'll be.

  7. #7
    Senior Member DemostiX's Avatar
    Join Date
    Jan 2011
    Location
    Like Lewis & Clark: Wintrin' o/t Columbia again: PDX
    Hammock
    Clark w 2QZQ mod,Tropical, NX;Nano
    Tarp
    Clark micro
    Insulation
    Major down
    Suspension
    7/64 SK75 +strap
    Posts
    2,322
    Images
    13
    There is a single braid hollow 1/2 polypropelene utility rope from Samson that is inexpensive, easy to splice and cheap, < $.45 / foot that would be fun with that hammock. You really want, for safety something with a breaking strength of about 1500 lb, which in turn may get assigned maximum load (for non weight bearing) of 1/5 that, 300lb.

  8. #8
    SilvrSurfr's Avatar
    Join Date
    Jul 2011
    Location
    Jersey Shore, NJ
    Hammock
    Dutch PolyD
    Tarp
    HG Winter Palace
    Insulation
    HG 0, 20, 40
    Suspension
    Dutch Whoopie Hook
    Posts
    14,716
    Images
    3
    Is it this rope?

    http://www.homedepot.com/h_d1/N-25ec...&storeId=10051

    $2.98 for a 75 ft. length is a great price. I bought a few of these.

    It's fine for a tarp ridgeline. Not too stretchy, but I moved onto 1.75 mm Zing-It, which is not that expensive at $25 to $30 for 180 ft. roll. Some vendors sell it by the foot if you just want to get a 30 or 40 ft. ridgeline.

  9. #9
    Senior Member DemostiX's Avatar
    Join Date
    Jan 2011
    Location
    Like Lewis & Clark: Wintrin' o/t Columbia again: PDX
    Hammock
    Clark w 2QZQ mod,Tropical, NX;Nano
    Tarp
    Clark micro
    Insulation
    Major down
    Suspension
    7/64 SK75 +strap
    Posts
    2,322
    Images
    13
    If that is the line, OP confused breaking strength with working strength. Like so much rope from Home Depot and similar, this stuff is a dogs breakfast, recycle who-knows-what, as the specs say. But, it floats, doesn't absorb water, and can be used to tie up captured burglars securely...... with multiple wraps.

  10. #10
    Senior Member
    Join Date
    Sep 2010
    Location
    Rochester, NY
    Hammock
    Hennesy
    Tarp
    various
    Insulation
    pads, foam
    Posts
    4,687
    Images
    17
    Quote Originally Posted by bkautzman89 View Post
    i picked up some braided polycord from homedepot and it has a breaking strength of 50lbs. i was thinking of using it to replace the cord that is in my gathered end hammock. i'll be doubling it up. do you think it'll hold? i don't weigh much. i feel like it should since it's braided...but who knows. if not...then i have some good cord for something.
    It would work for tying in the gathered end if you are doing a larkshead with something else. If you are using it as a loop with a descender ring it is too weak.

  • + New Posts
  • Page 1 of 2 12 LastLast

    Similar Threads

    1. Fabric with a high breaking strength?
      By jordo_99 in forum Fabrics
      Replies: 5
      Last Post: 02-01-2013, 14:23
    2. Help with a Science Fair Project - Breaking strength of rope
      By MrToot in forum Suspension Systems, Ridgelines, & Bug Nets
      Replies: 15
      Last Post: 11-20-2011, 09:37
    3. Nylon shock cord - breaking strength?
      By MAD777 in forum Fabrics
      Replies: 3
      Last Post: 12-06-2010, 07:15
    4. Breaking Strength Required for Structural Ridgeline?
      By ChrisKayler in forum Suspension Systems, Ridgelines, & Bug Nets
      Replies: 14
      Last Post: 08-25-2010, 10:14

    Bookmarks

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •