Post to help me find the thread again. But also weight wise me and oldgringo have found a noticeable difference on a gtul even with a snap link/biner.
Post to help me find the thread again. But also weight wise me and oldgringo have found a noticeable difference on a gtul even with a snap link/biner.
OTOH, the UL is quite a bit larger than the Nano.
An interesting point about the newhanger method of attaching the spreader is that it is adjustable. The bar can be positioned anywhere on the "bridle". I hang the hammock, and give the bar a good tug until it fetches up against the hammock, and there's minimal curve, or arc, at the channel end. Others may want more arc, and that's easily obtained, too. This is genius.
Dave
"Loneliness is the poverty of self; solitude is the richness of self."~~~May Sarton
Just did a quick measurement and an attempt at math. On my bridge hammock the spreader bars are 29" and the amsteel lines creating the triangle are 23.5" each. If my brain is working right then scaling the spreader bar down to 6" should make each amsteel line 4.86" ea. Adding 5 inches or less to each end of your hammock is not to bad. How long are most going with their triangles? If I ever get a dowel spreader built Ill have to test my splicing skills and try this out. I wish 7-11 still had the aluminum slurpee straws. I would be tempted to try this with one of those.Thats pretty slick RePete, the challenge (for me anyway) is to keep the suspension reasonably short, which is hard to do with burys everywhere, but this gives me some ideas. Thanks.
Pete.
The opinions expressed by this user are not those of a competent individual. If they were that would mean I know what I am talking about.
In response to RePete's comment about the mini spreader bar suspension making the hammock longer: I think the actual hammock fabric can be made shorter, such that the total length is about the same.
I haven't made one of these (yet) so wait for a confirmation on that one. My hesitancy is based upon the fact that this mini spreader will add more weight than will be reduced by the shorter fabric - but I'm slowly caving in
Mike
Mike
"Life is a Project!"
Mad777 I may have missed it but I dont think anyone has actually tested the theory that you can reduce your hammock length and keep the same lay. (or better) I am interested to see if anyone actually tries it. Its really sort of subjective. You would actually need to do it with a hammock you know the feel of well so you can make a good comparison. I dont think most people could build a 9 ft hammock put in mini spreaders and say it feels like an 11 ft hammock.
Pete.
The opinions expressed by this user are not those of a competent individual. If they were that would mean I know what I am talking about.
I don't view this mod as a way to make shorter hammocks, or make short hammocks feel like longer ones. What it does, is this: it minimizes or eliminates calf ridge, and in so doing, seems to free up a little bit more space for my feet.
Dave
"Loneliness is the poverty of self; solitude is the richness of self."~~~May Sarton
Still, it's a tantalizing theory. It had occurred to me, too. The spreader bar in a bridge hammock is a way of shortening the infinitely long "triangle" (two parallel lines) to a finite delta. I suspect there are a lot of variables that affect the way the hammock feels, so I wouldn't chop off too much fabric, but I'd bet you could achieve the same feel in a hammock + triangle arrangement that was the same length or a few inches shorter. You could try a slightly longer spreader bar, but that's one of those variables.
I haven't followed this thread closely. Has anyone made the same modification at both ends of the hammock?
^^^Yes, several of them.
Dave
"Loneliness is the poverty of self; solitude is the richness of self."~~~May Sarton
Bookmarks