Results 1 to 7 of 7

Thread: UK Help

  1. #1
    Member
    Join Date
    Apr 2012
    Location
    Wallsend England
    Hammock
    DIY gathered end
    Tarp
    DD
    Suspension
    DIY whoppie slings
    Posts
    54

    UK Help

    Trying to get silnylon in the UK is a nightmare wo should I buy ripstop nylon and silicone seal it myself or is there another material I could use

  2. #2
    Senior Member turnerminator's Avatar
    Join Date
    Sep 2009
    Location
    Peterborough,UK
    Hammock
    DIY Pertex
    Tarp
    DIY with doors on
    Insulation
    Down and synthetic
    Suspension
    Whoopies & hooks
    Posts
    1,252
    Have you tried Profabrics? They usually have it

    Extremtextil also sell many top quality fabrics.


    As an alternative, you can use PU coated nylon or polyester which will also be much cheaper and just as light.

  3. #3
    Member
    Join Date
    Apr 2012
    Location
    Wallsend England
    Hammock
    DIY gathered end
    Tarp
    DD
    Suspension
    DIY whoppie slings
    Posts
    54
    they have this but I am not sure if it is thick enough (strong)
    http://www.profabrics.co.uk/shop/sho...php?id=NRST-99

  4. #4
    Member
    Join Date
    Apr 2012
    Location
    Wallsend England
    Hammock
    DIY gathered end
    Tarp
    DD
    Suspension
    DIY whoppie slings
    Posts
    54
    Also when I read 1.2oz material is that the weight per amount of area of material as in the uk I can only find grams

  5. #5
    New Member
    Join Date
    Jun 2012
    Location
    Sweden
    Posts
    1
    If my calculations is right that fabric is 70g/m^2, or 2.06oz/square yard.

    What are you making?

  6. #6
    Member
    Join Date
    Apr 2012
    Location
    Wallsend England
    Hammock
    DIY gathered end
    Tarp
    DD
    Suspension
    DIY whoppie slings
    Posts
    54
    I am going to make a tarp but was also going to make a hammock out of a different material but again having problems with the material strenght.

  7. #7
    Senior Member turnerminator's Avatar
    Join Date
    Sep 2009
    Location
    Peterborough,UK
    Hammock
    DIY Pertex
    Tarp
    DIY with doors on
    Insulation
    Down and synthetic
    Suspension
    Whoopies & hooks
    Posts
    1,252
    That silnylon was the one I was thinking of and yes, its strong enough. its around 2 oz/sqyd.
    My main user DIY tarp is PU coated ripstop nylon which was made from 1.5oz. The silicon impregnation actually increases the tear strength-its good.

    I use oz/sq yd because that's what I have picked up from here and its become ingrained. I convert to g/sqm when shopping in the UK.

    To help; weights are usually listed per linear unit length which means that the entire width is weighed and this is usually larger than a meter.
    Also; US weights are before being coateed/impregnated and so will weigh more than they are listed. Our weights are listed as finished weights so making a direct comparison between US and UK fabric weights is part guess work.

    For the hammock, I recommend a ripstop nylon or polyester.
    My favourite hammocks are DIY and made from Pertex 4(Skylon is almost identical). It's a really hardwearing, water resistant and snowproof but highly breathable fabric and feels brilliant in use.

    Fabrics'n'stuff have a great range of fabrics too, often a little cheaper (but don't carry silnylon). They have some very high quality parachute nylon which are also very suitable and lighter and cheaper than the Pertex.

    As a guide, I have a ripstop nylon hammock from fabrics n stuff's range that I made from 38g/sqm stuff. Its a double layer and is plenty strong enough too.

  • + New Posts
  • Bookmarks

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •