Results 1 to 10 of 33

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Senior Member TZBrown's Avatar
    Join Date
    Jul 2008
    Location
    Fenton, Michigan
    Hammock
    DIY,Speer,Tbird, JRB
    Tarp
    HG CF, MacCat, GG
    Insulation
    HG,JRB,Speer,UGQ
    Suspension
    numerous, seasonal
    Posts
    1,973
    Images
    1

    Thread Injectors free

    In the spirit of the holidays, and inspired by other generous HF members, I have 3 repaired, cleaned and lubed machines that I am going to offer FOR FREE.

    There is a catch, as there always is. Only ask for one, if you NEED it.
    And, these all are heavy, all metal housings, 25-30 pounds, and I cannot ship them.
    Both of the newer ones are plastic gear drives, but work fine for lighter duty, just no straps or canvas advised.

    The Singer Stylist 457 has had the plastic gear replaced, that was the weak link.

    The Singer 6221C has had the lower rear housing repaired but does not affect the sewing.

    The White model 43 is all metal, and has had the motor drive wheel replaced and has a parts machine with it. Set in a partial cabinet with knee control.

    Shipping would probably be more than the machines could be bought for in your local area. So pick up, or arrange hand off transport.

    If there is a lot of interest I will draw names for each machine.
    Post to the thread.

    I would like to have these spoken for by December 5 if possible.
    We can arrange pickup, or whatever after that.

    Merry Christmas
    TZ
    Attached Images Attached Images
    Life's A Journey
    It's not to arrive safely at the grave in a well preserved body,
    But rather to skid in sideways, totally worn out, shouting,
    Woo Hoo!....What a Ride!

    My PHOTOS

    My VIDEOS

  • + New Posts
  • Similar Threads

    1. Questions on vintage injectors of thread!
      By Charlie Brew in forum Do-It-Yourself (DIY)
      Replies: 35
      Last Post: 04-10-2012, 18:59
    2. Thread injectors: importance of zigzag?
      By CatSplat in forum Do-It-Yourself (DIY)
      Replies: 14
      Last Post: 10-26-2011, 18:02
    3. Hand held thread injectors?
      By Hamper in forum Do-It-Yourself (DIY)
      Replies: 8
      Last Post: 08-22-2010, 19:44
    4. Newb question about thread injectors
      By dvisic in forum Do-It-Yourself (DIY)
      Replies: 8
      Last Post: 07-17-2010, 09:10
    5. Alternative to Thread Injectors
      By CJK in forum Do-It-Yourself (DIY)
      Replies: 3
      Last Post: 03-16-2010, 22:44

    Bookmarks

    Posting Permissions

    • You may not post new threads
    • You may not post replies
    • You may not post attachments
    • You may not edit your posts
    •