Looks like I am going to get a Speers after much looking...
If I do, is the stock suspension ok? Should I switch to something else? Looking forward to your suggestions.
Looks like I am going to get a Speers after much looking...
If I do, is the stock suspension ok? Should I switch to something else? Looking forward to your suggestions.
Stock suspension works for some. A much better option that would allow you to adjust the hammock much easier and not have to modify anything would be the JRB Tri-Glides. www.jacksrbetter.com/Tri-Glides.htm
http://www.hammockforums.net/forum/s...ead.php?t=3203
"Every day above ground is a good day"
Also consider a ring buckle system.
I would suggest trying out the Speer multi-wrap technique, seeing how you like it, and going from there. It might be just what you want.
All of these techniques have tradeoffs with ease of use, cost, weight, reliability, swinging a metal object on the end of webbing, etc. Some folks just don't want to tie anything, others don't mind, and some prefer to use their knot skills while camping and shake their heads at the ones that can't seem to tie anything. It's all good and we get to do it our own way.
Youngblood AT2000
i was going to change my speer to spectra cord--i havent dug into the knot yet- not sure how speer does it. anybody done a change to cord?? is it much of a job to changeover??
Last edited by Mrprez; 01-19-2009 at 08:48. Reason: Corrected name of knot - thx YB!
Sheepbend... have you been counting sheep jumping over a fence to get sleepy? It is double sheet bend he switched to. The sheet bends on each end of the hammock uses about 9 inches (total) less fabric than the previous overhand knots (with the sewn webbing loops).
I have used the double sheet bend knot successfully with all manner of webbing and rope, except for the AmSteel Blue cord. I had to do it differently because the AmSteel Blue would slip, that is some slippery rope that takes knots to another level. I basically used a triple sheet bend with the free end (hope that is the right terminology) tied back to the cord with a bow line knot backed up with a looped-stopper of sorts. I have that on the hammock I have been using recently and that works well. I think I attached some photos in a post about how I did that.
All that wasn't necessary on the Spyder cord that has a polyester sheath but I kind of like that with the small diameter ropes, something about it just looks right to me with small diameter ropes where you worry about having enough friction to do the job. You end up choking the fabric from both ends of the sheet bend loops instead of just one end.
Youngblood AT2000
Stock suspension is fine...many of us just like to tinker so we change things up. I'd follow Youngblood's advice and try the stock first, then decide if you want to go adding things or changing to cord. You may be happy with the stock system, and if you're not then you know why you changed it based on your own experience.
Check here: http://www.tothewoods.net/HammockCampingSuspension.html
Republics are created by the virtue, public spirit, and intelligence of the citizens. They fall when the wise are banished from the public councils because they dare to be honest, and the profligate are rewarded because they flatter the people, in order to betray them. ~Judge Joseph Story
- My site: http://www.tothewoods.net/
- Designer, Jeff's Gear Hammock / Pack Cover by JRB
IMPOSSIBLE JUST TAKES LONGER
Bookmarks