I have a dumb question I wad offered this hammock stand and I know it is used for hammocks with spreader bars and not knowing the angle of the arms would this fit an eno style hammock or a diy gathered end hammock. Just want to be able to use mine in the house. I've attached a pic of the hammock and the stand.
Since you have a structural ridgeline, it's possible but the ends may be a bit low to clear the ground.
Don't let life get in the way of living.
You may be able to jam some pipe into the top at each end in order to raise the attach points higher - worked for a stand I had similar. Used a 45* elbow w a 18" pipe on Each end of rhe elbow- topped w a T Connector. Works. Ends do pull inward a bit when in hammock. Solved with a line between them keeping tension when hammock was empty.
- Loki my videos
"Climb the mountains and get their good tidings.
Nature's peace will flow into you as sunshine flows into trees.
The winds will blow their own freshness into you, and the storms their energy,
while cares will drop away from you like the leaves of Autumn." — John Muir
I have that same stand and used it to test some things but found it was too low for a proper hang. I still use it for the occasional backyard nap. Although I have a Turtledog stand now so the old pipe stand is hiding out n the shed.
i have a stand like that and it works just fine with an ENO
Debi
Posting Permissions
Reply With Quote
Bookmarks