I like it when I can mix and match equipment from different makers, so when I hooked up Mamajama doors to a vertex tarp (see pic), I found out they fit together like a hand in glove.
I originally bought the doors to go on my cloudburst, but when I checked and saw that the dimensions of the mamajama were similar to the vertex , I figured the doors would fit and they did. I hooked them up for a quick overnight and what followed was a windy night, followed by a very wet and windy morning. No water got in, but as you can see, the tarp started to sag from the cold, rain and wind. If I would have stayed another night, I would have hooked up my inside single pole mod, (courtesy from tendertoe), which works well on the vertex to keep the center from sagging too much...here's the link to how to make it...
https://hammockforums.net/forum/show...highlight=2qzq
BTW, the sandy soil was so saturated with water, I had to either tie the guy lines off to trees or secure them with 2 or 3 stakes apiece to keep them from pulling out.
Bookmarks