Looking for Hennessy DIY plans.

[DARKSHADOW]

Been awhile since I've posted here. But still hanging and spreading the word and making people envious of my restful sleeping in the back woods.

Was looking for a write up on making a Hennessy clone it remember from a while back. Want to make one or two up just for hanging in the yard or in my man cave no net or anything. And a line on the material needed. Sorry limited to my phone at the moment and search is failing me.

A little help would've awesome. Thanks.

[Hangs4Fun]

My understanding is to start with a 60" x 120" hammock go to the center of the 120" length measure 13" back from there towards the head on the "front and place a tie out point. Go back to center and go 13" towards the foot end on the "back" and put the 2nd tie out point. When tied out these create the asyme lay and will also allow you to use HH accessories.
Then gather the ends and add your ridgeline. Fit a piece of noseeum over the ridge and fit your zipper.

For the deluxe just go with a 132" by 60" hammock body with the timeouts in the same points.

Someone chime in if you found the old post I have seen with drawings and correct me if I'm wrong.
Good luck and welcome back

[Syb]

https://www.hammockforums.net/forum/...read.php?t=670

[Hangs4Fun]

Thanks Syb that was the EXACT article I was referring to..

[DARKSHADOW]

Oh geez forgot about the stick forum that's right at the top of the page. Duh!

Thanks