I just got home and looked at it again. It doesn't have any black tabs only white!
Looking at it more closely, one of the ends has a steeper slope than other, I'm guessing that's the head end?
Can any one steer me straight?
~S
Mine have 2 black tabs where the shock cord attaches and 2 white tabs where the shock cord is attched.
Edit: It is only one black tab and it appears to be at the wider end of the UQ. Hope this helps
Mine have 2 black tabs where the shock cord attaches and 2 white tabs where the shock cord is attched.
Edit: It is only one black tab and it appears to be at the wider end of the UQ. Hope this helps
There should be one black tab at the head end, If not, we goofed. Look for two small lines of stitching on the inside, this attaches the Torso Heater to the interior layer. The line of stitches closet to the end represents the head end. Hope this helps.
The line of stitches closet to the end represents the head end.
Yes, I see them. They position the tubes closer to the head end. Also, I notice with my Orca that the head end appears to have a steeper angle then the foot end.
Thanks for clarifying,
~S
Last edited by Sidewinder; 03-15-2011 at 01:20.
Reason: sp
Bookmarks