line length question?

[A.Bottoms]

ok so i made my own fly using the plans from diy gear but now i dont know how long to make the lines that attach the fly to the tree?

any suggestions?

thanks,
A.Bottoms

[dragon360]

By fly I assume tarp - I tend to have a 30' ridgeline (continuous) for my tarps. Seems to work for me. If you're not looking continuous simply subtract your tarp ridgeline length from 30' (or 25' or what have you) and put those on either end. I wanted enough to get around some fair sized trees.

[A.Bottoms]

just wondering but how do you rig up your tarp? im thinking about doing it this way http://www.hammockforums.net/forum/s...ad.php?t=16650

By fly I assume tarp - I tend to have a 30' ridgeline (continuous) for my tarps. Seems to work for me. If you're not looking continuous simply subtract your tarp ridgeline length from 30' (or 25' or what have you) and put those on either end. I wanted enough to get around some fair sized trees.

[Shug]

Hey there....I did some videos on tarps. Go to PART 5-9 for some tarp info. http://www.hammockforums.net/forum/s...ad.php?t=15516
Dejohas diagram is right on as well.
Shug

[Rob3E]

I just figured the maximum distance that I could hang the hammock and made sure the tarp could span the same distance.

[WetRivrRat]

I prefer to use a ridgeline 'free' setup. Take the idea of the typical ridgeline, just cut out all but the bare minimum of the suspension line and use a prusik on each end to tension the tarp. Provided you use some sort of hardware in your mount points you can mount it to the same mount point as your hammock and you can remove them separately (as needed), so if it starts to rain you can still remove your hammock but keep dry.

Takes less suspension line, is easy to manage and makes double use of your hammock mounting hardware. Just remember to always use tree huggers so as to not damage the trees!