If you overlap the Winter and the 3 season you wouldn't need to connect them with snaps. I'm guessing they'd seal up fine and not let any cold drafts in. Brandon or anyone that has a winter and a 3 season want to try this and post a picture for us?
If you overlap the Winter and the 3 season you wouldn't need to connect them with snaps. I'm guessing they'd seal up fine and not let any cold drafts in. Brandon or anyone that has a winter and a 3 season want to try this and post a picture for us?
As far as I know teh snaps are to add a liner to beef up the insulation. Here is the thread
Peace Dutch
GA>ME 2003
www.MakeYourGear.com
http://dutchwaregear.com[/URL]
Visit Dutchwaregear on facebook (and like it)
Check us out on Twitter @dutchwaregear
I have 2 3 season yeti's, i tried them side by side, but the uq suspension lines were digging in and quite uncomfortable on the left side. I tired them on top of each other, then one in front one in back, nothing would work, only one was comfortable.
Last edited by ikemouser; 11-04-2009 at 17:42.
and if you are using them 'side by side' which i mean the end of one touching the end of another--so really they are abutting lengthwise......in this setup run shock cord loop through the sides of both of them and then the the gathered end balls of fabric.
IF you have the Winter Yeti and the 3 season Yeti think of the combinations and temperature ranges at your command......yes in dual mode it will be longer than most professional basketball players would need but it would be very difficult to find a cold spot!
I have a right footbox yeti (standard), wheni run 2 2 season yetis connecting lengthwise downthe hammock, i get the tension line uncomfortably closing in over my head. i sleep on my left side, so i feel it near my face when im layin on my side. The cord is obviously above my head though, the force of the two cords pulling up is simply not comfortable. I am not doing anything wrong as far as i know, i have both over the footbox. I have a no sniveller anyway, its more comfy than two of those.
Just curious, when u guys setup two yetis longways (covering as much of the hammock lengwise as possible), do you put the side with the white pearl snap closest to the head end on BOTH or just the first one.
Last edited by ikemouser; 11-06-2009 at 01:04.
Shug- Did you use velcro or anything to keep your UQ's together at the joining point? I thought I read that on the forum somewhere. If you did use velcro. How is it working/ holding up?
Bookmarks