MacEntyre
07-07-2010, 09:34
This little video uses the 3/4 IX UQ to show the new way of...
How to Tell the Inside from the Outside of a Molly Mac Gear IX UQ (http://www.youtube.com/watch?v=qJtXm6jXla0)
qJtXm6jXla0
MacEntyre
07-07-2010, 16:23
I've been reminded that some of the newer Molly Mac Gear IX UQs, with two layers sewn together, have no indication of top or inside. Here's how you find them:
Find the 2'x3' InsulTubes Torso Heater sewn-in pad... it's positioned between the layers, toward the head end.
If you can find the tacks at the corners of the pad, where it is sewn in, that is the inside layer, which goes up against the hammock. The tacks are stitched with white thread, about one to two inches long.
You can confirm that you have it right. The outer layer should be significantly fuller, particularly in the middle.
Now that you know which is the head end, and which is the inner layer, you should mark the corner that would be at your right shoulder.
Let me know if you have any trouble identifying the inside and outside.
- MacEntyre