View Full Version : Video: How to make a hammock bug net
Hey everyone, Fronkey here and I made a video tutorial on how to make a bugnet for your hammock. This is the bug net design I have been using for quite awhile now and prefer it over ones with zippers. It's easy to get in and out and it works perfect for keeping the bugs out.
I am also including below, step by step instructions with pictures on how to make it as well.
So, you can get both a video and pictures to help you out with this fun project.
Materials
7 yards no see um fabric
5 yards 1/8” shock cord
1 cord lock
Black 100% polyester thread
You can use tulle instead of the no see um. However no see um netting repels insects better because the holes are smaller.
Also, you can use different size shock cord as well. This is just my preference and it does save on weight. If you want to go even lighter you can use 7/64”
dfEM6yEO268
Since ridgeline lengths very in size, you first want to measure your ridgeline.
http://www.hammockforums.net/forum/picture.php?albumid=1006&pictureid=11173
Once you have your ridgeline measured, multiply that number by two to include both sides of the bug net. Then add 6 inches to give your hammock net some wiggle room by the gathered ends. You don’t want the netting tight on your hammock in case you move around a lot in it. If it's tight, you may take the chance of damaging it and giving that extra room prevents that.
I am going to use a ridgeline of 110" as my example.
If your ridgeline is 110" and you mutiply that by two, you get 220".Then you add 6" to get a total of 226".
Next, take your big piece of fabric and fold it in half. Once you've folded it over, your piece will be 113" long.
http://www.hammockforums.net/forum/picture.php?albumid=1006&pictureid=11172
You will then sew one of your lengthwise pieces together. This will be what hangs over your ridgeline.
http://www.hammockforums.net/forum/picture.php?albumid=1006&pictureid=11177
Time for your bottom. First, you want to find what 20% of your ridgeline length is. To get this you multiply your ridgeline length by .20.
For example:
If my ridgeline is 110" and I want 20%, you just multiply your ridgeline length by .20 to get your answer. Which would be 22"
110
x.20
22
Then on your bottom, measure inward to your answer, and mark it.
http://www.hammockforums.net/forum/picture.php?albumid=1006&pictureid=11178
Repeat this on the other side too.
Time for some cutting. You are going to cut your fabric from where you marked the bottom, to the top corner. In the picture below I labeled it "point A" and "Point B"
http://www.hammockforums.net/forum/picture.php?albumid=1006&pictureid=11176
Again, repeat this on the other side as well.
It should look something like this, when you're done.
http://www.hammockforums.net/forum/picture.php?albumid=1006&pictureid=11179
Back to the sewing machine. You are now going to sew your sides together. When doing this, you do not want to sew all the way to the top. Just leave enough room for your suspension to fit through. So, if you are using whoopie slings, a small hole or a bigger one if your using webbing for suspension. etc...
The line in red below is what you sew and the line in green is where your gap is going to be.
http://www.hammockforums.net/forum/picture.php?albumid=1006&pictureid=11180
You're almost done! :D
Finally, it's time to do your channels.
Fold over a piece of your fabric and leave a gap just big enough for your shockcord to slide through. You will do this for the entire bottom of your bugnet.
http://www.hammockforums.net/forum/picture.php?albumid=1006&pictureid=11181
Then slide your shock cord through what you just sewed leaving some extra cord on the ends for your cord lock. Put on your cordlock, tie a knot at the end and you are finished! :)
Now you put it on your bugnet and enjoy being bug free!:D
I hope this helps some people out and if there's anything I can help you out with please let me know. :)
Fronkey
sclittlefield
10-01-2011, 15:40
Love it! Thanks for the instruction vid, well done. I like the quick, clear, concise - and that's one heck of a mosquito... nearly as big as they are here in Maine...
Hawk-eye
10-01-2011, 16:00
Now that was one right cute instructional video pal ... well done! Not to mention a really good idea!
Redoleary
10-01-2011, 16:16
Very cool! Well done.
jasonb986
10-01-2011, 16:43
You make some great video's!
HappyHiker
10-01-2011, 16:52
Very nice! Makes me want to reconsider an attached bugnet on my DIY hammock - the simplicity is great. About how much does a finished one weigh?
Raul Perez
10-01-2011, 17:00
Very awesome! I aint got me's no thread injector... nor would I ever have the time for DIY stuff. But if I did that was super easy to follow. Great Job!
Hawk-eye
10-01-2011, 17:08
Very awesome! I aint got me's no thread injector... nor would I ever have the time for DIY stuff. But if I did that was super easy to follow. Great Job!
Yeah but Raul you don't need a bug net as bad as Fronkey ... he's got giant skeeters that might ... gasp :scared: ... lick you to death!!!!! :woot:
Love it! Thanks for the instruction vid, well done. I like the quick, clear, concise - and that's one heck of a mosquito... nearly as big as they are here in Maine...
Thanks a lot Scott!
That's exactly what I was going for. The vid is a quick summary of how to make the bugnet and then someone can then go to the bottom instructions for a little more in depth "How to."
Our skeeters are awful because they lure you in with their cuteness and then suck you dry. :scared:
Now that was one right cute instructional video pal ... well done! Not to mention a really good idea!
I kid you not. That 3 second clip with all of my pets took over 20 minutes to film. :lol: Thanks a lot for watching!
Very cool! Well done.
Thanks Red!
You make some great video's!
Thanks man. I really appreciate it!
Very nice! Makes me want to reconsider an attached bugnet on my DIY hammock - the simplicity is great. About how much does a finished one weigh?
It's very easy to make and I prefer it to an attached bug net because it gives me the option of having one or not when I'm already out there. I will weigh it when I get home and let you know. Thanks a lot for watching!
Very awesome! I aint got me's no thread injector... nor would I ever have the time for DIY stuff. But if I did that was super easy to follow. Great Job!
Thanks dude! This was the type of bugnet I had offered to make you before you got one. I just hate zippers and tried to come up with a way to not have to use one. Shock cord is my best friend!
Yeah but Raul you don't need a bug net as bad as Fronkey ... he's got giant skeeters that might ... gasp :scared: ... lick you to death!!!!! :woot:
They're huge here and those killer licks will take anyone down. :lol:
Fronkey
gargoyle
10-01-2011, 17:35
Good stuff Fronkey.
Hawk-eye
10-01-2011, 17:59
I kid you not. That 3 second clip with all of my pets took over 20 minutes to film. Thanks a lot for watching!
I have no doubt ... I worked 3 months of trying to film Spencer doing the head tilt that I use at the end of my videos. He does it all the time but point a camera at him and he turns away! Finally got past his resolve ... with bacon! :D
Great instructions. How wide was your fabric? I'm looking for height from ridgeline to bottom net. Good job.
Good stuff Fronkey.
Thanks gargoyle!
I have no doubt ... I worked 3 months of trying to film Spencer doing the head tilt that I use at the end of my videos. He does it all the time but point a camera at him and he turns away! Finally got past his resolve ... with bacon! :D
Haha, that's what I used! Man, Kiba and Spencer would get along great.
Great instructions. How wide was your fabric? I'm looking for height from ridgeline to bottom net. Good job.
Great question! 54" I got it from DIY gear supply (http://www.diygearsupply.com/cgi-bin/shelf.cgi?numb=22)
Fronkey
bluejeans
10-01-2011, 18:13
Great bug net and very well illustrated. When I lived in Alaska I really thought the Mosquitos were big but Minnesota has bigger ones. Not sure the bug net is strong enough to stop them????
Looks great! I think this is how I'll end up doing mine now. What did you do for where your suspension goes through the netting? Just leave a little gap or did you reinforce it with something?
I can't wait for my material to show up so I can get some protection from the FL muskytoes :)
Dave
Great bug net and very well illustrated. When I lived in Alaska I really thought the Mosquitos were big but Minnesota has bigger ones. Not sure the bug net is strong enough to stop them????
You lived in Alaska? I was there for 5 months. Man, we are going to have some good conversations in a couple weeks at the Northern hang.
Looks great! I think this is how I'll end up doing mine now. What did you do for where your suspension goes through the netting? Just leave a little gap or did you reinforce it with something?
I can't wait for my material to show up so I can get some protection from the FL muskytoes :)
Dave
I left a little gap to slide my suspension on through. It doesn't need any extra support however, you could hem that little section where the gap is if you wanted to to make it look a little nice. I did this on one of the nets I made for a friend. Good luck dude and if you need help, just let me know.
Fronkey
Myteathor
10-01-2011, 18:48
And WHY! havent you mentioned your cat in your videos!?? Showing a lil canine favortisim hmmmmmm!!!
enoorange
10-01-2011, 19:04
Excellent timing.
Today I was with my wife at the local "Hobby Lobby" and purchased some Tulle netting....so was searching for some ideas and walla...found your video.
Just what I was needing. Thanks! Nice work.
AND your PETS listened so well!!!
Well done! I do like your aproach. I like the ability to reach outside the rig without unzipping and letting critters in.
Thanks for taking the time to share this! Way cool!
ArcsandSparks
10-01-2011, 20:05
Sweet video and instructions dude! If I didn't have DIY hammock w/ net already I probably would make one...Let's be honest, I probably will anyway :D
They should probably make this bad boy a STICKY.
Callahan
10-01-2011, 20:36
Man, another great video Fronkey, I need all the sewing instruction I can get!
Jeez, the mosquitos out there are something else!
+1 on the sticky request!
Cheers :D
And WHY! havent you mentioned your cat in your videos!?? Showing a lil canine favortisim hmmmmmm!!!
Because they're evil! Every day they do something to annoy me and the girlfriend finds it hiarious. So yes, I do favor the canine. :D
Excellent timing.
Today I was with my wife at the local "Hobby Lobby" and purchased some Tulle netting....so was searching for some ideas and walla...found your video.
Just what I was needing. Thanks! Nice work.
AND your PETS listened so well!!!
Awesome dude! I'm glad this will help you out and that's why I wanted to make some instructions for it. Good luck man and let me know how it goes.
Well done! I do like your aproach. I like the ability to reach outside the rig without unzipping and letting critters in.
Thanks for taking the time to share this! Way cool!
Thanks man! When you get up in the middle of the night to write your name, you'll really appreciate it, because your net closes itself automatically. That's one of the reasons I made this design and have loved it for quite awhile now.
Sweet video and instructions dude! If I didn't have DIY hammock w/ net already I probably would make one...Let's be honest, I probably will anyway :D
They should probably make this bad boy a STICKY.
You could always make one for your ENO. ;)
And thanks a lot for the sticky suggestion. It would be pretty cool to get one of those.
Man, another great video Fronkey, I need all the sewing instruction I can get!
Jeez, the mosquitos out there are something else!
+1 on the sticky request!
Cheers :D
They are huge and adorable here... BEWARE!
Glad these instructions can help you out dude and thanks for the sticky suggestion.
Fronkey
Great video, great idea, great big but lovable bugs out your way.
TFC Rick
10-01-2011, 22:13
Forget Sticky. They should rename stickys Fronkeys. Now I have sewing to do.
pullarius
10-01-2011, 22:38
Awesome vid. Super helpful.
I'm a total newb, but with DIY instructions like this, I have a feeling I'm gonna have to get my own sewing machine before the year is out.
Thanks.
Great video, great idea, great big but lovable bugs out your way.
Thanks a lot Veto. It's a really easy project and it sure does keep those pesky bugs away.
Forget Sticky. They should rename stickys Fronkeys. Now I have sewing to do.
Haha thanks a lot dude! I made your snake skins out of the left over fabric I had from this project.
Awesome vid. Super helpful.
I'm a total newb, but with DIY instructions like this, I have a feeling I'm gonna have to get my own sewing machine before the year is out.
Thanks.
Thanks man. It's fun to make one and pretty dang simple too.
Fronkey
Good to beat the skeet!
That is a good fix for the hammock.
Shug
The timing on this is just way too cool. I just got the whoopies installed on my son's cheapo parachute hammock. Now I need some insect protection and "voila", instructions in my first search.
Rather than sew the ends I may just leave them open for now. I want to be able to install/remove without taking down the hammock. Perhaps if I put a length of shock cord along each bottom edge so I can tie it together at the corners if that would keep the netting in place? Maybe a few short tabs of velcro to close off the ends just a bit (keep it from sliding off). This would add a little weight but make it more flexible for my purposes.
Great idea....just what I was looking for.
canoebie
10-02-2011, 10:34
I really like the simplicity of this. I am going to making some hammocks and skeeter nets when the snow is flying and I want to do something beside the warm wood stove. Thanks.
Good to beat the skeet!
That is a good fix for the hammock.
Shug
Thanks dude.
Even our big minnesota skeeters don't stand a chance.
The timing on this is just way too cool. I just got the whoopies installed on my son's cheapo parachute hammock. Now I need some insect protection and "voila", instructions in my first search.
Rather than sew the ends I may just leave them open for now. I want to be able to install/remove without taking down the hammock. Perhaps if I put a length of shock cord along each bottom edge so I can tie it together at the corners if that would keep the netting in place? Maybe a few short tabs of velcro to close off the ends just a bit (keep it from sliding off). This would add a little weight but make it more flexible for my purposes.
Great idea....just what I was looking for.
Awesome! I'm glad these instructions can help you out.
If you leave the ends open you won't be able to do the shock cord bottom because that will prevent it from coming off the way you were describing.
I actually don't have to take the hammock down when removing the netting. I just pull off one whoopie, slide it through the netting hole and then re-attach it to my webbing. Then walk on over to the other side and repeat. My hammock never even touches the ground and it takes about a minute to do.
I can shoot a quick video for you tomorrow if you want a visual example. Just let me know dude. :)
I really like the simplicity of this. I am going to making some hammocks and skeeter nets when the snow is flying and I want to do something beside the warm wood stove. Thanks.
I figured this would be a perfect project for those cold winters. Let me know how it comes out and I'm glad this will help you out. Thanks a lot!
Fronkey
Triggerhpy
10-02-2011, 13:34
What the was the project cost brake down and how much time did it take?
jareed58
10-02-2011, 13:41
This is my next DIY, thanks for the instructions.
timabababaluka
10-02-2011, 14:38
So clear and concise
I felt my response should be
Written as haiku
Picture--thousand words
video--thousand pictures
Ah! NOW I get it
Once again, great post
Fronkey! Must finish now and
Make me a bugnet
What the was the project cost brake down and how much time did it take?
Great questions!
It takes about 30-45 minutes to make one your first go at it.
The cost of materials will vary depending on the person and materials. Tulle being cheaper than no see um and length of ridgeline etc.
If you need a fabric long enough for a 110" ridgeline you will need 7 yards. You will have a little under a yard of it left over though.
But, a breakdown for a 110" ridgeline would come out like this.
7 yards of no see um fabric would be about $25 and 5-6 yards of shock cord would be about $1.40.
So, the whole project would be roughly $26.40. Plus you would have plenty of fabric left over to make a couple sets of snake skins for your tarp and some other stuff too.
If you used Tulle it would be about $16.00
This is my next DIY, thanks for the instructions.
Awesome! Let me know how it comes out. :D
So clear and concise
I felt my response should be
Written as haiku
Picture--thousand words
video--thousand pictures
Ah! NOW I get it
Once again, great post
Fronkey! Must finish now and
Make me a bugnet
I shall return my gratitude with a haiku as well.
Thank you for your words.
I do appreciate it!
Refrigerator.
:D
Good luck dude and hope you like it.
Fronkey
Fronkey, you just keep upping the bar. These are excellent and easy to follow directions. Well done as with all your vids. How much do your actors get paid? :D
Triggerhpy
10-02-2011, 18:09
Thanks for the brake down. I would go with the no-see-um for sure.
Again thanks and :thumbup:on the shock cord mod.
I spent the afternoon hunting noseeum....Seattle fabrics seemed to have the best price at $2.99/yd and they sell the other goodies too. It's just kind of sad to pay $25 to build a bug net for a $14 hammock. Oh well.
Fronkey, you just keep upping the bar. These are excellent and easy to follow directions. Well done as with all your vids. How much do your actors get paid? :D
Thanks so much Syb!
They had a lot of demands. Their own trailer, assistants, more cat nip and bacon. Man, those actors are a pain!
Thanks for the brake down. I would go with the no-see-um for sure.
Again thanks and :thumbup:on the shock cord mod.
Awesome, glad it worked for you.
No see um all the way for me too. I like the stronger material when I'm out there. I'm clumsy and careless. :D
I spent the afternoon hunting noseeum....Seattle fabrics seemed to have the best price at $2.99/yd and they sell the other goodies too. It's just kind of sad to pay $25 to build a bug net for a $14 hammock. Oh well.
How is their shipping? I heard it's a little steep on some things.
Fronkey
About how much does a finished one weigh?
I just weighed the one I made for a friend and it came out to 6.2oz. :D
Fronkey
lmoseley7
10-02-2011, 22:38
I'm attaching a picture of a bug net made Fronkey-style out of tulle. The occupier of the hammock is my cousin and hammock tester. You'll see I have a makeshift ridgeline made of mason line. The ridgeline of this bug net is 10' and it was made for this hammock, which is 11' long. I made a small stuff sack out of the same material as the hammock and with the bug net in the stuff sack the whole thing comes to 2.65 oz. I used mason line for the under channel instead of shock cord, because I find shock cord binds up on tulle.
27432
I'm attaching a picture of a bug net made Fronkey-style out of tulle. The occupier of the hammock is my cousin and hammock tester. You'll see I have a makeshift ridgeline made of mason line. The ridgeline of this bug net is 10' and it was made for this hammock, which is 11' long. I made a small stuff sack out of the same material as the hammock and with the bug net in the stuff sack the whole thing comes to 2.65 oz. I used mason line for the under channel instead of shock cord, because I find shock cord binds up on tulle.
27432
Terrific!
That looks awesome and you did a great job! You're cousin looks comfy and skeeter free. Glad it worked out for you and thanks for reporting in with your results.
Fronkey
BLUEFIN 774
10-03-2011, 08:16
Hey Fronkey,
That looks like a super easy net to make. I may have to try one. Thanks for posting such a good video and step by step photos, that really helps.
SteelerNation
10-03-2011, 14:06
Thanks again, Fronkey!
Am just about to try my hand at building myself a bridge hammock and have been trying to think about a way to build a removable net that isn't as fussy to make as some of the bridge netting that I have seen. I like the wrap-around net that I have from Warbonnet Guy that I use right now and was thinking about trying to modify that style for my bridge somehow. Your bungee bottom is even better and I will now use that as a starting point.
Any ideas out there for how to convert this to work with a bridge would also be great :)
Just really love the idea of being able to remove the net when the weather gets cooler to offset the weight of the heavier UQ/TQ's. Man, really loving the bungee bottom idea!
SN
Hey Fronkey,
That looks like a super easy net to make. I may have to try one. Thanks for posting such a good video and step by step photos, that really helps.
Thanks dude. It really is super easy to make and will keep those pesky bugs away! :D
Thanks again, Fronkey!
Am just about to try my hand at building myself a bridge hammock and have been trying to think about a way to build a removable net that isn't as fussy to make as some of the bridge netting that I have seen. I like the wrap-around net that I have from Warbonnet Guy that I use right now and was thinking about trying to modify that style for my bridge somehow. Your bungee bottom is even better and I will now use that as a starting point.
Any ideas out there for how to convert this to work with a bridge would also be great :)
Just really love the idea of being able to remove the net when the weather gets cooler to offset the weight of the heavier UQ/TQ's. Man, really loving the bungee bottom idea!
SN
That's too funny as just the other day I watched all of Grizz's how to vids for his hammock and was making a material list to start one of my own.
Are you making a Grizz Bridge too?
The net would for sure work with a bridge hammock and I've already thought of some ways on how to do it as well. Once I make a bridge hammock, I will probable re-hash these instructions so someone can apply it to a bridge.
Fronkey
Thanks dude. It really is super easy to make and will keep those pesky bugs away! :D
That's too funny as just the other day I watched all of Grizz's how to vids for his hammock and was making a material list to start one of my own.
Are you making a Grizz Bridge too?
The net would for sure work with a bridge hammock and I've already thought of some ways on how to do it as well. Once I make a bridge hammock, I will probable re-hash these instructions so someone can apply it to a bridge.
Fronkey
Hey ya'll.....here is the bug net I fashioned for my GrizzBridge.
I sorta morphed it from Grizz's and Hangouts bug nets.
Shug....... http://s928.photobucket.com/albums/ad127/Shug7secure/GrizzBridge%20BugNet/
Ok Dawg, you got tons of kudoso for this,,,,that is good stuff.
Ya know I am not a gram counter but when I picked up the tullee (sp) That stuff is light....
Thanks for the incentive for me to jump start the sewing machine again.
TFC Rick
10-03-2011, 19:54
All, to roll with this idea, could a climate pod be made out of rip-stop with the same plan?
For those with shorter hammocks, you could use mosquito nets from Academy/Wal mart. They are 8 bucks and would have enough material.
TheXringHunt
10-03-2011, 19:55
Fronkey, love your videos. Top notch.
Hey ya'll.....here is the bug net I fashioned for my GrizzBridge.
I sorta morphed it from Grizz's and Hangouts bug nets.
Shug....... http://s928.photobucket.com/albums/ad127/Shug7secure/GrizzBridge%20BugNet/
That's really cool! I bookmarked your photobucket album. All the pictures you have of your grizzbridge will really help with visuals on making one for myself. Plus, I really like your design and will have some questions for you in a few weeks when I get to the bug net stage. Thanks a lot!
Ok Dawg, you got tons of kudoso for this,,,,that is good stuff.
Ya know I am not a gram counter but when I picked up the tullee (sp) That stuff is light....
Thanks for the incentive for me to jump start the sewing machine again.
Thanks a lot dude! lmoseley7 already made one from my design out of tulle and said it came out at 2.65 oz. It will be a fun project for sure. Thanks again!
All, to roll with this idea, could a climate pod be made out of rip-stop with the same plan?
For those with shorter hammocks, you could use mosquito nets from Academy/Wal mart. They are 8 bucks and would have enough material.
You know, I'm not sure if you could. However, it would be a lot of fun to try it out.
Fronkey, love your videos. Top notch.
Thanks so much dude! I appreciate it!
Fronkey
hangNyak
10-04-2011, 20:57
This just came at the right time. I've been wanting to make a removable bugnet for my GT Utralight. This is perfect! Really enjoy your vids as well!
This just came at the right time. I've been wanting to make a removable bugnet for my GT Utralight. This is perfect! Really enjoy your vids as well!
Oh yeah, I've reeled in another one! :lol:
I'm glad these instructions can help you out dude and if you have any questions, just give me a shout and I'll help you out. :D
Fronkey
Well, following the instrutions and adding a lil to it. I finished my first bug net tonight.
I used one of the olive green bug nets for a cot that I got from Academy, it cuts out to be 54" by 101". The green will match the camo Grand Trunk.
Sewed it up as shown but used plain para cord on the bottom with a cord lock.
Since I use the straps for suspension I put 3" worth of velcro to close the ends up completely.
Only things is I cant lay here under it for but just a few minutes and a time... then I gotta get out.......
Cuz.....
It just tickles my BUTT, this was so simple and inexpensive.....
Thanks for posting this....thread
Well, following the instrutions and adding a lil to it. I finished my first bug net tonight.
I used one of the olive green bug nets for a cot that I got from Academy, it cuts out to be 54" by 101". The green will match the camo Grand Trunk.
Sewed it up as shown but used plain para cord on the bottom with a cord lock.
Since I use the straps for suspension I put 3" worth of velcro to close the ends up completely.
Only things is I cant lay here under it for but just a few minutes and a time... then I gotta get out.......
Cuz.....
It just tickles my BUTT, this was so simple and inexpensive.....
Thanks for posting this....thread
Awesome! Really glad it worked out for you and great job in the improvise.
Fronkey
OK, pics or it didnt happen.....
Here is the green "Fronkey Bug Net ", made from an Academy camp cot mesquito net.
This has been one of the most useful threads I have seen in awhile... Thanks.
Randy
http://img.photobucket.com/albums/v75/thecatfishboat/2011-10-08_09-11-32_36.jpg
http://img.photobucket.com/albums/v75/thecatfishboat/2011-10-08_09-12-12_748.jpg
http://img.photobucket.com/albums/v75/thecatfishboat/2011-10-08_09-12-35_525.jpg
OK, pics or it didnt happen.....
Here is the green "Fronkey Bug Net ", made from an Academy camp cot mequito net.
This has been one of the most useful threads I have seen in awhile... Thanks.
Randy
http://img.photobucket.com/albums/v75/thecatfishboat/2011-10-08_09-11-32_36.jpg
http://img.photobucket.com/albums/v75/thecatfishboat/2011-10-08_09-12-12_748.jpg
http://img.photobucket.com/albums/v75/thecatfishboat/2011-10-08_09-12-35_525.jpg
That is too cool! It looks awesome Randy and I'm really happy that this thread could help you out. Thanks a lot!
Fronkey
How can this be recommended for a sticky.
Next to learning how to build a hammock from HF..
This Bug Net is very easy to make and under $10.00 in some cases...
I VOTE FOR A STICKY.....
I am finishing up my 3rd and 4th Fronkey Bug .
I have some of my hammocks that I dont even use now equiped with a bug net....dont ax me why....
LMAO!!!!!!!!! Great video and actually a great bug net too, will be making a few of these for the kids....WOOT!!!!! Much easier than an attached bug net....
I am finishing up my 3rd and 4th Fronkey Bug .
I have some of my hammocks that I dont even use now equiped with a bug net....dont ax me why....
Wow! You can probably make these better than I can now. Great job!
LMAO!!!!!!!!! Great video and actually a great bug net too, will be making a few of these for the kids....WOOT!!!!! Much easier than an attached bug net....
Glad to hear it sr and thanks for checking out!
Fronkey
I didnt get them both finished but one is complete and one cut out. The one I got finished was for the Hammock Bliss double. Of course I lost time cuz I had to go outside and test fit it....Now I can retire that ENO bug guard from summer use.
Boom! (thanks)
http://www.hammockforums.net/forum/picture.php?albumid=1518&pictureid=11542
Boom! (thanks)
http://www.hammockforums.net/forum/picture.php?albumid=1518&pictureid=11542
Shazam! Looks awesome!
Fronkey
Fronkey you are the man
But, mixed with a frog and a monkey. :D
Fronkey
OneThing
10-22-2011, 17:15
I would like to know if anyone has just removed the bugnet from a HH and made a removable one? I was going to have a mod 4 zipper put on & saw these nets. I like the idea of having a ligher setup for winter without the net. I would guess that something like what Shug made for his bridge hammock might work as well. Any ideas on this?
I would like to know if anyone has just removed the bugnet from a HH and made a removable one? I was going to have a mod 4 zipper put on & saw these nets. I like the idea of having a ligher setup for winter without the net. I would guess that something like what Shug made for his bridge hammock might work as well. Any ideas on this?
In this case it would probably be easier to just get/make a bugnetless hammock. Then you don't have to fiddle around with something that already works great. Plus, it gives you an excuse to get another hammock. :D
Fronkey
HappyHiker
10-25-2011, 05:54
All, to roll with this idea, could a climate pod be made out of rip-stop with the same plan?
I was thinking the same thing. Possibly just want to add a velcro/snap/drawstring opening on the headend for ventilation (not sure how necessary that would be). Might be a little heavier than a few other hammock socks I was looking at (that used a single width of fabric with an extra insert vs 2 lengths of fabric). This design would be slightly easier to construct, and vastly easier to enter/exit.
All, to roll with this idea, could a climate pod be made out of rip-stop with the same plan?
It could certainly be done but perhaps instead of putting the shock cord on the bottom move it toward one end (preferably the head end for cinching up/ease of removing it) so there is less of an opening. I think with the shock cord on the bottom there would be too much heat loss.
I made a sock that was basically a tube of nylon with shock cord on the foot and head ends but I'm thinking about taking the Fronk-net and turning it in to a new hammock sock. Good thinking TFC.
It could certainly be done but perhaps instead of putting the shock cord on the bottom move it toward one end (preferably the head end for cinching up/ease of removing it) so there is less of an opening. I think with the shock cord on the bottom there would be too much heat loss.
I made a sock that was basically a tube of nylon with shock cord on the foot and head ends but I'm thinking about taking the Fronk-net and turning it in to a new hammock sock. Good thinking TFC.
Sounds pretty cool! Looking forward to some pics of "The Syb sock" :laugh:
Fronkey
HappyHiker
10-25-2011, 17:25
I made mine without making the angled end cuts. Just folded over and ran a seam down the open end. I was thinking it would be nice to be able to lift the net completely out of the way for fear of causing damage to the net when using the hammock as a chair, and for ease of sliding a pad in between the hammock layers. Easy enough to remove more material if I ever change my mind. :) It weighs in at 8 and 1/8 oz (but could get lighter if I removed some shockcord). I call it the Funky Fronkey bug net. :laugh:
http://www.hammockforums.net/forum/picture.php?albumid=1585&pictureid=11598
http://www.hammockforums.net/forum/picture.php?albumid=1585&pictureid=11597
I made mine without making the angled end cuts. Just folded over and ran a seam down the open end. I was thinking it would be nice to be able to lift the net completely out of the way for fear of causing damage to the net when using the hammock as a chair, and for ease of sliding a pad in between the hammock layers. Easy enough to remove more material if I ever change my mind. :) It weighs in at 8 and 1/8 oz (but could get lighter if I removed some shockcord). I call it the Funky Fronkey bug net. :laugh:
Great job dude! Those skeeters don't stand a chance.
Fronkey
FireInMyBones
02-20-2012, 21:34
q4krrnvmyKo
Finished this earlier today. Thanks for the idea Fronkey.
Thanks for the video. I have the same netting and thought that I would have to extend the bottom edge for my 10'-6" to 11' hammocks. Your video with the shorter hammock confirms that I will and has saved me from part of the trial and error.
FireInMyBones
02-20-2012, 21:54
I'm glad I could help.
q4krrnvmyKo
Finished this earlier today. Thanks for the idea Fronkey.
That came out really great dude! You look mighty comfy in their and I hope it helps you beat the skeet! :)
Fronkey
Flatfishy
02-21-2012, 05:49
Excellent vid.
Thanks.
This is perfect! I'm strictly a visual learner so thanks for the pics and vid, Now if I can't get this "work" thing out of the way I can make one
lubbockhammockguy
02-21-2012, 12:16
This should be a sticky :D
This is perfect! I'm strictly a visual learner so thanks for the pics and vid, Now if I can't get this "work" thing out of the way I can make one
Good luck dude! Post some on here after you get it made. :) Looking forward to seeing it.
Fronkey
Cool! I got another sticky! Woop! Woop! :D
Fronkey
The shock cord is a great idea, now off to modify my current skeeter proofing apparatus.
Cool! I got another sticky! Woop! Woop! :D
Fronkey
A well deserved sticky at that!
The shock cord is a great idea, now off to modify my current skeeter proofing apparatus.
Have fun dude!
A well deserved sticky at that!
Thank you!
Fronkey
I recently made my own bugnet based off your design and I must say, it works great! Kept the skeeters out all night and then I was able to quickly slide it off to the side out of the way the next day because of velcro in the top corners.
I recently made my own bugnet based off your design and I must say, it works great! Kept the skeeters out all night and then I was able to quickly slide it off to the side out of the way the next day because of velcro in the top corners.
Awesome dude! Glad it worked out for you and you showed those sky piranhas who owns the woods.
Fronkey
where did you buy the no see um fabric?
Backwoods Daydreamer (http://www.diygearsupply.com/cgi-bin/shelf.cgi?numb=22)
Fronkey
clarkaway
04-20-2012, 21:13
Fronkey, thanks for the vid! I just got my first hammock (ENO Doublenest) and I'm excited to enter this new world!
I had a question about the initial set up for this project: when you double the length and fold it over do you leave it folded on that side? Or cut it into two seperate pieces and sew it back later?
Also, would you recomend leaving the holes for the suspension a little bigger and doing another shock cord on each to ensure it sinches tight? Maybe I'm just paranoid :P
I'll be camping primarily in FL and this is my first priority for an upgrade for my hammock.
Thanks for the help!!
Clarkaway
Fronkey, thanks for the vid! I just got my first hammock (ENO Doublenest) and I'm excited to enter this new world!
I had a question about the initial set up for this project: when you double the length and fold it over do you leave it folded on that side? Or cut it into two seperate pieces and sew it back later?
Also, would you recomend leaving the holes for the suspension a little bigger and doing another shock cord on each to ensure it sinches tight? Maybe I'm just paranoid :P
I'll be camping primarily in FL and this is my first priority for an upgrade for my hammock.
Thanks for the help!!
Clarkaway
Yeah, you cut it into two separate pieces.
For the suspension holes, I would leave them as is. People have been doing some mods to that part by using velcro, omni tape, etc.
What I personally do is just tie them off with some of the extra cord I carry in my pack. It's lighter than velcro and I can adjust it if needed too.
Also, I grew up in WPB, Fl. I feel for you with those sky piranhas.
If you need any more help than feel free to ask. Good luck dude.
Fronkey
clarkaway
04-20-2012, 22:41
Thanks for the quick response!!
I'm def in the learning stages of all of this. With your design, what would you do with the bug net to keep it out of the way while you're not using it during the day time (like if you used the hammock as a chair, or just didnt want to tangle with it)? Or do you just leave it on the whole time you're camping?
Clarkaway
Thanks for the quick response!!
I'm def in the learning stages of all of this. With your design, what would you do with the bug net to keep it out of the way while you're not using it during the day time (like if you used the hammock as a chair, or just didnt want to tangle with it)? Or do you just leave it on the whole time you're camping?
Clarkaway
Well, during the day I am hiking. But, the bugs are still out in the day time too and I like to hide inside it. I have just lifted the netting out of the way so my butt is sitting directly on the hammock so I don't stretch the net. Another way is to just take it off one side of the suspension and pull it to one side.
Fronkey
For the end treatment on mine where the hammock suspension comes out, I sewed a small channel and ran 1/16" draw cord through it with a mini cord lock.
1MarbleMissing
04-22-2012, 13:42
Just saw this. I love the idea of a shock cord instead of a zipper. My Amazonas zipper jams every once in a while. I'll keep the cord idea in mind when I either replace my net with a new one, or replace my hammock.
Never thought I'ld see a mosquito that could make me laugh. And I think it may be bigger than the ones they claim in Texas.
Just saw this. I love the idea of a shock cord instead of a zipper. My Amazonas zipper jams every once in a while. I'll keep the cord idea in mind when I either replace my net with a new one, or replace my hammock.
Never thought I'ld see a mosquito that could make me laugh. And I think it may be bigger than the ones they claim in Texas.
I'm not a fan of zippers too.
Our hybrid skeeters are crazy. They lure you in with their cuteness and then eat you to death. :scared:
Fronkey
Had an hour or two Friday night and decided to make a bugnet for my Bridge hammock. Came out really well and works great.
http://www.hammockforums.net/gallery/files/6/7/bridge_bugnet_3.jpg (http://www.hammockforums.net/gallery/showimage.php?i=17570&c=2)
http://www.hammockforums.net/gallery/files/6/7/bridge_bugnet_2.jpg (http://www.hammockforums.net/gallery/showimage.php?i=17569&c=2)
http://www.hammockforums.net/gallery/files/6/7/bridge_bugnet_1.jpg (http://www.hammockforums.net/gallery/showimage.php?i=17568&c=2)
Had an hour or two Friday night and decided to make a bugnet for my Bridge hammock. Came out really well and works great.
Looks awesome man! It's great to know that it will even work with a bridge hammock. Great job.
Fronkey
JollyGreen
05-06-2012, 07:04
would love to try this
revbknox
05-06-2012, 14:08
Much thanks on the how to vid. Been lookin for an easy DIY bugnet vid and this will do the trick. Planning on making one this week. Thanks Fronkey!
Much thanks on the how to vid. Been lookin for an easy DIY bugnet vid and this will do the trick. Planning on making one this week. Thanks Fronkey!
Awesome dude. Post some photos when you're done.
Fronkey
This is the video that got me to join the Hammock Forums. I had been looking for something cost effective so I can try spending some nights in my Eno double-nest that I received as a gift a few years ago. I just completed the bug net last night and plan to use it this weekend and spend my first night elevated to a higher level. Thanks for the design and video.
Great video! Boy, there are some extremely large bugs flying around your place. Might have to consider wire mesh for the bug net to guard them off. HA! HA!
Thanks for sharing the idea. I will be added the shock cord to my existing bug net.
Great design. I made one a few weeks ago and it got its first real test this weekend. I set up my HHED and my DIY with Fronkey net in the yard. Friday night my daughter & I camped out there, and on saturday my wife took a turn. It was warm & buggy both nights, and Yooper skeets are nasty. But the net worked great, the Queenbee would have let me know otherwise :eek:
I made the end openings about 3" long, so I could slide it off to one end of the hammock when not needed, but it had a tendency to creep inwards on the RL. Since I had hemmed the ends, I just threaded some mason line through so I can cinch it down outside the whipped end of the hammock- works a treat. I just tied them for now, till I can get a couple cordlocks.
http://www.hammockforums.net/gallery/files/1/9/4/8/4/img_4192_thumb.jpg (http://www.hammockforums.net/gallery/showimage.php?i=17737&c=member&imageuser=19484)
We've looked at other DIY bugnet designs but we really think this beats them all- no zipper, easy to make, cheap, and quick to get into. Very few bugs seem to follow you in through the bottom hole.
I'll soon be making the Princessbee a hammock (purple of course), and she'll certainly be getting the same kind of net.
Thanks again for the design.
Cheers,
Dave
Subscribed. So simple, I'll probably make one while I try to figure out getting the bugnet onto my DIY WarBird.
Thanks Fronkey!
Fronkey just wanted to let you know that this design keep me from getting carried away buy them little buggers.
This is the video that got me to join the Hammock Forums. I had been looking for something cost effective so I can try spending some nights in my Eno double-nest that I received as a gift a few years ago. I just completed the bug net last night and plan to use it this weekend and spend my first night elevated to a higher level. Thanks for the design and video.
That's really great to hear doogie. I'm happy that you made one and joined HF too. There are a lot of other fun projects on here from some more of our fellow hammock forums members. Careful though, D.I.Y. is addicting. :D
Great video! Boy, there are some extremely large bugs flying around your place. Might have to consider wire mesh for the bug net to guard them off. HA! HA!
Thanks for sharing the idea. I will be added the shock cord to my existing bug net.
She is an escape artist and would still find away to get in. :lol: Thanks for watching!
Great design. I made one a few weeks ago and it got its first real test this weekend. I set up my HHED and my DIY with Fronkey net in the yard. Friday night my daughter & I camped out there, and on saturday my wife took a turn. It was warm & buggy both nights, and Yooper skeets are nasty. But the net worked great, the Queenbee would have let me know otherwise :eek:
I made the end openings about 3" long, so I could slide it off to one end of the hammock when not needed, but it had a tendency to creep inwards on the RL. Since I had hemmed the ends, I just threaded some mason line through so I can cinch it down outside the whipped end of the hammock- works a treat. I just tied them for now, till I can get a couple cordlocks.
http://www.hammockforums.net/gallery/files/1/9/4/8/4/img_4192_thumb.jpg (http://www.hammockforums.net/gallery/showimage.php?i=17737&c=member&imageuser=19484)
We've looked at other DIY bugnet designs but we really think this beats them all- no zipper, easy to make, cheap, and quick to get into. Very few bugs seem to follow you in through the bottom hole.
I'll soon be making the Princessbee a hammock (purple of course), and she'll certainly be getting the same kind of net.
Thanks again for the design.
Cheers,
Dave
The photo looks awesome. I'm happy to see that you got one made and it worked great for you.
The Princessbee will be rockin' the purple!
Subscribed. So simple, I'll probably make one while I try to figure out getting the bugnet onto my DIY WarBird.
Thanks Fronkey!
Awesome!
Fronkey just wanted to let you know that this design keep me from getting carried away buy them little buggers.
I'm glad you are safe and only being carried away by your hammock. :)
Fronkey
Well I got my birthday present early this year and it's a... Sewing machine!! I've got all the material I need for this project but realized I don't know what stitch to use. My wife thought zig-zag but I figured I would ask here and see what y'all think!
DerNageler
05-25-2012, 13:52
My son and I each made one two weeks ago. They worked great on our canoe trip. I used mine with my ENO-DN and he used it with his GTUL. We decided to use the netting from REI. I do not think there are tons of no-see-ums near us. Rather simple to construct and works great. Some in our troop were wondering what we were going to do with the area being somewhat buggy.
Well I got my birthday present early this year and it's a... Sewing machine!! I've got all the material I need for this project but realized I don't know what stitch to use. My wife thought zig-zag but I figured I would ask here and see what y'all think!
I just use a straight stitch and it has worked great for me. Since you're new to the sewing game, practice with some scrap pieces first and then you will be good to go to tackle this easy project.
My son and I each made one two weeks ago. They worked great on our canoe trip. I used mine with my ENO-DN and he used it with his GTUL. We decided to use the netting from REI. I do not think there are tons of no-see-ums near us. Rather simple to construct and works great. Some in our troop were wondering what we were going to do with the area being somewhat buggy.
That's awesome! Sounds like you and your boy had an awesome trip too.
Fronkey
DerNageler
05-26-2012, 15:21
That's awesome! Sounds like you and your boy had an awesome trip too.
Fronkey
It was an awesome trip! A little fishing on the Pax and then the B2 Bomber flew by about four passes and the Blue Angels wrote GEICO Ads up in the sky!
Great design. I easily made two of these for my eno sn and the walmart special I leave on the porch. I got away with 6 yards each for them as the ridgeline is shorter on these. In fact, I am laying in one now with my eno sn on the porch while typing this. Thanks again. I use amsteel continuous loops and rings and sewed mine pretty much all the way up around the suspension and just worked the lines through the little gap. It seems to seal up well enough. I did fold over the seams and double stitch them so that creates a good seal around the suspension.
Donkeyhiker
05-30-2012, 09:44
Simple method. Just what I was looking for.
One question though (Tried to read all replies to make sure it wasn't already answered)...How does the material hold up when sewing directly to itself?
I just got some no-seeum, and was thinking I would need to use grosgrain or something similar to give the stitch something to "bite into".
Simple method. Just what I was looking for.
One question though (Tried to read all replies to make sure it wasn't already answered)...How does the material hold up when sewing directly to itself?
I just got some no-seeum, and was thinking I would need to use grosgrain or something similar to give the stitch something to "bite into".
It actually holds up really well. Just cut off a piece of scrap and give it a practice run and you'll see what I mean.
Fronkey
PAHikingTrails
05-30-2012, 21:11
Hey everyone, Fronkey here and I made a video tutorial on how to make a bugnet for your hammock. This is the bug net design I have been using for quite awhile now and prefer it over ones with zippers. It's easy to get in and out and it works perfect for keeping the bugs out.
I am also including below, step by step instructions with pictures on how to make it as well.
So, you can get both a video and pictures to help you out with this fun project.
Materials
7 yards no see um fabric
5 yards 1/8” shock cord
1 cord lock
Black 100% polyester thread
You can use tulle instead of the no see um. However no see um netting repels insects better because the holes are smaller.
Also, you can use different size shock cord as well. This is just my preference and it does save on weight. If you want to go even lighter you can use 7/64”
dfEM6yEO268
Since ridgeline lengths very in size, you first want to measure your ridgeline.
http://www.hammockforums.net/forum/picture.php?albumid=1006&pictureid=11173
Once you have your ridgeline measured, multiply that number by two to include both sides of the bug net. Then add 6 inches to give your hammock net some wiggle room by the gathered ends. You don’t want the netting tight on your hammock in case you move around a lot in it. If it's tight, you may take the chance of damaging it and giving that extra room prevents that.
I am going to use a ridgeline of 110" as my example.
If your ridgeline is 110" and you mutiply that by two, you get 220".Then you add 6" to get a total of 226".
Next, take your big piece of fabric and fold it in half. Once you've folded it over, your piece will be 113" long.
http://www.hammockforums.net/forum/picture.php?albumid=1006&pictureid=11172
You will then sew one of your lengthwise pieces together. This will be what hangs over your ridgeline.
http://www.hammockforums.net/forum/picture.php?albumid=1006&pictureid=11177
Time for your bottom. First, you want to find what 20% of your ridgeline length is. To get this you multiply your ridgeline length by .20.
For example:
If my ridgeline is 110" and I want 20%, you just multiply your ridgeline length by .20 to get your answer. Which would be 22"
110
x.20
22
Then on your bottom, measure inward to your answer, and mark it.
http://www.hammockforums.net/forum/picture.php?albumid=1006&pictureid=11178
Repeat this on the other side too.
Time for some cutting. You are going to cut your fabric from where you marked the bottom, to the top corner. In the picture below I labeled it "point A" and "Point B"
http://www.hammockforums.net/forum/picture.php?albumid=1006&pictureid=11176
Again, repeat this on the other side as well.
It should look something like this, when you're done.
http://www.hammockforums.net/forum/picture.php?albumid=1006&pictureid=11179
Back to the sewing machine. You are now going to sew your sides together. When doing this, you do not want to sew all the way to the top. Just leave enough room for your suspension to fit through. So, if you are using whoopie slings, a small hole or a bigger one if your using webbing for suspension. etc...
The line in red below is what you sew and the line in green is where your gap is going to be.
http://www.hammockforums.net/forum/picture.php?albumid=1006&pictureid=11180
You're almost done! :D
Finally, it's time to do your channels.
Fold over a piece of your fabric and leave a gap just big enough for your shockcord to slide through. You will do this for the entire bottom of your bugnet.
http://www.hammockforums.net/forum/picture.php?albumid=1006&pictureid=11181
Then slide your shock cord through what you just sewed leaving some extra cord on the ends for your cord lock. Put on your cordlock, tie a knot at the end and you are finished! :)
Now you put it on your bugnet and enjoy being bug free!:D
I hope this helps some people out and if there's anything I can help you out with please let me know. :)
Fronkey
LOL, I just watched this video on YouTube last night. I like the idea. I also like the idea of sliding it across and then cinching it up that way.
Which would be lighter?
Your method
Cinch method from one end of hammock
zipper method?
Thanks!
Great post. Very easy to follow!!!
It actually holds up really well. Just cut off a piece of scrap and give it a practice run and you'll see what I mean.
Fronkey
Did you have to use any special kind of thread?
LOL, I just watched this video on YouTube last night. I like the idea. I also like the idea of sliding it across and then cinching it up that way.
Which would be lighter?
Your method
Cinch method from one end of hammock
zipper method?
Thanks!
It really varies on some things. Hammock length, length of zipper, diameter of shock cord, material used etc.
For example, Papa Smurf's sock is probably the lightest because it's made from Tulle.
I personally like this one because the bottom entry lets me grab stuff off the ground without having to unzip or move anything.
Great post. Very easy to follow!!!
Thanks so much dude!
Did you have to use any special kind of thread?
Use 100% Polyester thread. I use Gutterman's.
Fronkey
PAHikingTrails
05-31-2012, 16:11
Thanks Fronkey!
I also like the idea of sliding it across and then cinching it up that way.
I liked that too, but don't forget like I did and set up your bed (pad and bag) with the net pushed aside and then realize that it won't fit through the little hole with the pad and bag in it.
PAHikingTrails
06-01-2012, 17:25
I liked that too, but don't forget like I did and set up your bed (pad and bag) with the net pushed aside and then realize that it won't fit through the little hole with the pad and bag in it.
LOL, thanks for the FYI!
jvengineers
06-06-2012, 05:38
for my simple gathered end hammock i used a piece of no-see-um and put velcro on the ends so it could close over the lines. I then slipped some weight in the middle of each side to hold it down. I just used the roll width - a hem and it just made the width, i mean just. The more sag you use (flatter sleep on the diagonal) the more width you'll need from the mesh as the hammock dips lower below the ridgeline.
An option i have been considering because to save weight is to just do enough bug netting so it can drape over my top half and tuck around my quilt. If it is cold enough for this to work (being able to be fully covered by the quilt) the bugs might not be an issue any way though. I would just take 2yds and sew 1 60" side together leaving a small enough gap for the lines. I would pull this over the head end and then when i needed it i could pull it over me and tuck around my quilt. This wouldn't be supported by the ridgeline but could have a tab over your face to pull it up to the ridgeline to keep it off you.
Right now i am testing a hammock (not made nor designed by me) that has full bug proofing so i hadn't gotten around to trying this out but it is my plan if i try to do UL or SUL hammock hiking. Right now i plan to hammock for canoeing only.
Thanks for the great video. I have been unable to find anything for my 12' no ridgeline DIY. That was a great design. The only thing I did diffrent was to cut a 30% angle for the ends, because it's so long and a shock cord to keep it off me.
Thanks Fronkey!
You're welcome. :)
for my simple gathered end hammock i used a piece of no-see-um and put velcro on the ends so it could close over the lines. I then slipped some weight in the middle of each side to hold it down. I just used the roll width - a hem and it just made the width, i mean just. The more sag you use (flatter sleep on the diagonal) the more width you'll need from the mesh as the hammock dips lower below the ridgeline.
An option i have been considering because to save weight is to just do enough bug netting so it can drape over my top half and tuck around my quilt. If it is cold enough for this to work (being able to be fully covered by the quilt) the bugs might not be an issue any way though. I would just take 2yds and sew 1 60" side together leaving a small enough gap for the lines. I would pull this over the head end and then when i needed it i could pull it over me and tuck around my quilt. This wouldn't be supported by the ridgeline but could have a tab over your face to pull it up to the ridgeline to keep it off you.
Right now i am testing a hammock (not made nor designed by me) that has full bug proofing so i hadn't gotten around to trying this out but it is my plan if i try to do UL or SUL hammock hiking. Right now i plan to hammock for canoeing only.
Great minds think alike. It sounds like the "HUG bugnet" (http://www.hammockforums.net/forum/showthread.php?t=24029). If it is what you are talking about than there are "How to" instructions in that thread that could save you some time designing more. Great idea!
Thanks for the great video. I have been unable to find anything for my 12' no ridgeline DIY. That was a great design. The only thing I did diffrent was to cut a 30% angle for the ends, because it's so long and a shock cord to keep it off me.
I have a 12' hammock too and the ridgeline really helps. I'm glad it worked out for you in the end. Thanks for watching!
Fronkey
Fronkey, have you ever toyed with one of the zipper-less top-entry bug nets? I just made one, but haven't gotten the chance to test it in the field. I almost made the one you mentioned in this thread, but ended up deciding I may not want my butt hanging out :p
Just logged my second night hanging with the Fronkey bugnet. Actually my second night hanging. Anyway I learned something about the setup. The first night was at an AT campsite where the ground was packed and there were little if any bugs and I had no issues. My second night was in a very buggy and seldom used site that had grass/weeds about 6" tall. I set up, put on my net, made my bed and went to the campfire. Without thinking I left the shock cord open and laying on the ground. When I came back to sleep there was a very large wolf spider on my top quilt. :scared: I deftly removed him and a leaf hopper and all was well for the rest of the night. From now on I close up the shock cord and make sure it's over my ground cloth so I don't corral any more buggies. I sure glad I saw him instead of sleeping with him.
Fronkey, have you ever toyed with one of the zipper-less top-entry bug nets? I just made one, but haven't gotten the chance to test it in the field. I almost made the one you mentioned in this thread, but ended up deciding I may not want my butt hanging out :p
I have and it's a great design too.
But, for my own personal use, I prefer the bottom entry because I can pick stuff up off the ground without letting the bugs in.
Have fun with your new net!
Just logged my second night hanging with the Fronkey bugnet. Actually my second night hanging. Anyway I learned something about the setup. The first night was at an AT campsite where the ground was packed and there were little if any bugs and I had no issues. My second night was in a very buggy and seldom used site that had grass/weeds about 6" tall. I set up, put on my net, made my bed and went to the campfire. Without thinking I left the shock cord open and laying on the ground. When I came back to sleep there was a very large wolf spider on my top quilt. :scared: I deftly removed him and a leaf hopper and all was well for the rest of the night. From now on I close up the shock cord and make sure it's over my ground cloth so I don't corral any more buggies. I sure glad I saw him instead of sleeping with him.
Spiders make the worst snuggle buddies. :laugh:
Fronkey
Funkyleebasick
06-11-2012, 22:11
thanks, i think this will work for me.
thanks, i think this will work for me.
You're welcome. :)
Fronkey
Just logged my second night hanging with the Fronkey bugnet. Actually my second night hanging. Anyway I learned something about the setup. The first night was at an AT campsite where the ground was packed and there were little if any bugs and I had no issues. My second night was in a very buggy and seldom used site that had grass/weeds about 6" tall. I set up, put on my net, made my bed and went to the campfire. Without thinking I left the shock cord open and laying on the ground. When I came back to sleep there was a very large wolf spider on my top quilt. :scared: I deftly removed him and a leaf hopper and all was well for the rest of the night. From now on I close up the shock cord and make sure it's over my ground cloth so I don't corral any more buggies. I sure glad I saw him instead of sleeping with him.
here is my solution to the open bugnet while I am not in it...just fold it up over the ridgeline. this closes off the opening and keeps it up off the ground. i wasn't sure the shockcord would close tight enough to keep things out while I wasn't in there.
http://www.hammockforums.net/gallery/files/2/0/3/8/2/bugnet_storage_thumb.jpg (http://www.hammockforums.net/gallery/showimage.php?i=17897&c=2)
here is my solution to the open bugnet while I am not in it...just fold it up over the ridgeline. this closes off the opening and keeps it up off the ground. i wasn't sure the shockcord would close tight enough to keep things out while I wasn't in there.
http://www.hammockforums.net/gallery/files/2/0/3/8/2/bugnet_storage_thumb.jpg (http://www.hammockforums.net/gallery/showimage.php?i=17897&c=2)
Cool man!
Fronkey
Hey fronkey thanks for the sweet how to. One question though , how does it fit at the gathered end? Is it just a small opening or is it something fancier? Sorry if I missed it, first time making anything like this
Hey fronkey thanks for the sweet how to. One question though , how does it fit at the gathered end? Is it just a small opening or is it something fancier? Sorry if I missed it, first time making anything like this
There are a few options you can do. You can make the opening small and just take a small piece of cord and tie it ****, sew in some velcro or add omni tape to the ends for a great closure or you can make it a cinch cord closure.
I personally just take a small 3" piece of cord and tie it **** because it's lighter and I like tying knots. :) But, the velcro or omni tape does an excellent job.
Fronkey
One question though , how does it fit at the gathered end? Is it just a small opening or is it something fancier?
I made each end different to determine which I liked better.
On one end I used omni-tape (2 sided velcro) and on the other end I sewed a small channel with a thin cord and cordlock in it.
I much prefer the cord/cordlock closure. It's easier, weighs less, is less bulky, and no chance to damage the netting.
Cheers guys. Now i know what i will be doing this weekend :P
Billybobky
06-22-2012, 17:56
Gona try to make me one now. thanks for the info
Gona try to make me one now. thanks for the info
Have fun!
Fronkey
Thank you Fronkey :)
This is the project that is getting me out of my HH and into my own DIY hammock, it allows the quick in an out like the HH bottom slit, with the ability of being able to adjust your UQ, or reach out on to the ground.
My only question is: Is there any issues with bugs working their way in through gaps on the bottom over night? Not so worried about mosquitoes, but black flies .
Thank you Fronkey :)
This is the project that is getting me out of my HH and into my own DIY hammock, it allows the quick in an out like the HH bottom slit, with the ability of being able to adjust your UQ, or reach out on to the ground.
My only question is: Is there any issues with bugs working their way in through gaps on the bottom over night? Not so worried about mosquitoes, but black flies .
Awesome man, so happy to hear that.
Once you are in the hammock, there really won't be any gaps. Just makes sure you cinch it tight when you are not in it. I have heard of people who have had a couple bugs get in while they are not in their hammocks. Not pulling it tight when you aren't in it is an easy thing to forget when you're enjoying the outdoors.
Fronkey
MamaLeah
06-29-2012, 13:30
Thanks for sharing this fab design! I found some sheer fabric for a buck a yard that I think will work well. Plus, it's kind of a mauve/pink shade so I can wake up to a "looking through rose colored glasses" effect. So silly and frivolous but it makes me smile!
One slight modification I made was, before sewing the sides, I unfolded the whole thing and sewed some elastic (stretch the elastic while you stitch so it bunches up when you are finished) where the suspension gap is. I have been tinkering with different designs and thought it would be nice to have a bug net that would work with different hammocks as I figure out what I like best.
Arothian
07-01-2012, 07:05
Thanks for a great design! The Mrs and I put two of these together and they turned out great!
Thanks for sharing this fab design! I found some sheer fabric for a buck a yard that I think will work well. Plus, it's kind of a mauve/pink shade so I can wake up to a "looking through rose colored glasses" effect. So silly and frivolous but it makes me smile!
One slight modification I made was, before sewing the sides, I unfolded the whole thing and sewed some elastic (stretch the elastic while you stitch so it bunches up when you are finished) where the suspension gap is. I have been tinkering with different designs and thought it would be nice to have a bug net that would work with different hammocks as I figure out what I like best.
The pink sounds really cool.
Thanks for a great design! The Mrs and I put two of these together and they turned out great!
Awesome!
Fronkey
Good stuff. Thanks for the detailed pics.
You're welcome. I'm happy they helped out. :)
Fronkey
Boon Booni
08-12-2012, 22:38
Thanks for the DIY Fronky! I finally got around to making a bottom entry bug net.
http://boon-booni.smugmug.com/Motorcycles/Etc/Hammock/i-M7mgWwd/0/L/IMAG0466-L.jpg
http://boon-booni.smugmug.com/Motorcycles/Etc/Hammock/i-ZcHZD7t/0/L/IMAG0465-L.jpg
http://boon-booni.smugmug.com/Motorcycles/Etc/Hammock/i-JHwkDkM/0/L/IMAG0467-L.jpg
Not the best photos.
That area of blue was my brain child to create a space in the bug net where I would slide my UQ all the way down to one end of the hammock without having the bug net pull all funny. That blue area also has a zippper running from the ridge line to about 1' before the bottom entry, so I can unzip and slide the bug net all the way to one end without having to remove it from the hammock. It's nice for during the day when there's no so many bugs about.
Thanks again.
Thanks for the DIY Fronky! I finally got around to making a bottom entry bug net.
That area of blue was my brain child to create a space in the bug net where I would slide my UQ all the way down to one end of the hammock without having the bug net pull all funny. That blue area also has a zippper running from the ridge line to about 1' before the bottom entry, so I can unzip and slide the bug net all the way to one end without having to remove it from the hammock. It's nice for during the day when there's no so many bugs about.
Thanks again.
Awesome job dude! I love seeing all the mods people are coming up with. You did great!
Fronkey
So...I love the simplicity of this design and I see that a couple people have asked about trying this with ripstop to make a winter sock. Has anyone actually done it? I can see where the two concepts aren't exactly the same, but it still seems like it would work just fine.
So...I love the simplicity of this design and I see that a couple people have asked about trying this with ripstop to make a winter sock. Has anyone actually done it? I can see where the two concepts aren't exactly the same, but it still seems like it would work just fine.
I have made a canvas sock using this design actually. After doing so I decided it was better to have the bottom closed and I just cut out a door. Look at my "Frozen Butt Hang" video and you can see it.
Fronkey
I have made a canvas sock using this design actually. After doing so I decided it was better to have the bottom closed and I just cut out a door. Look at my "Frozen Butt Hang" video and you can see it.
Fronkey
Gracias! That's disappointing, I was getting my hopes up for something really easy.
Grapenut
09-01-2012, 21:09
Fronkey, just finished sewing up one of these bugnets and it works great! Thanks for the plans,
G-Nut :shades:
Fronkey, just finished sewing up one of these bugnets and it works great! Thanks for the plans,
G-Nut :shades:
Awesome! I'm really glad it worked out for you. :)
Fronkey
Has anyone ever left the corner pieces in. If you still put the cinch cord in the same spot but left the corners couldn't you use those corners as small storage pockets? Like for clothes, I understand anything heavy would pull on the netting. I am a old clothes off new clothes on for sleeping and usually in a tent put the old clothes down by my feet.
Great bug net and very well illustrated. When I lived in Alaska I really thought the Mosquitos were big but Minnesota has bigger ones. Not sure the bug net is strong enough to stop them????
LOL, there is a reason we call Mosquitos the Minnesota state bird.
hey thats way cool. thanks for showing it. jeff
tallyabt
10-16-2012, 14:38
Great idea, I think I over thought mine when I made it.
hey thats way cool. thanks for showing it. jeff
Thanks dude!
Great idea, I think I over thought mine when I made it.
Thanks. :) Happy to help.
Fronkey
needing a clarification; it's open and shock-corded on all 3 sides, just not the ridge line, obviously.
needing a clarification; it's open and shock-corded on all 3 sides, just not the ridge line, obviously.
The shock cord is only on the bottom. The top and sides are sewn.
Fronkey
greywolf
12-06-2012, 18:43
whats the width of the mesh on your design?
whats the width of the mesh on your design?
54". However, people have made it with a shorter width.
Fronkey
greywolf
12-07-2012, 13:24
thanks - I think im gonna go for this design. I like it better than a zipper - they always screw up. Im hiking the florida trail starting in January and I dont want to get eaten by bugs.
Great video and easy instructions. I know what I'll be making after the kids open their Christmas gifts. Can't wait. Made the wife go out on Christmas Eve to get me all the necessary materials.
Great video and easy instructions. I know what I'll be making after the kids open their Christmas gifts. Can't wait. Made the wife go out on Christmas Eve to get me all the necessary materials.
That's awesome dude. Have fun and a Merry X-mas.
Fronkey
Boilers23
12-28-2012, 23:48
I think I've found a New Year's Day project to complete my DIY hammock!
georgemaung
12-29-2012, 00:42
+1 for me too. Thanks for the instructions.
Porch Hanger
12-29-2012, 16:35
I finally got around to making this for my 10 yr old hanger.
Thanks for the great thread and vid.
https://lh3.googleusercontent.com/-d6vAZYsiuVU/UN9grZSaM6I/AAAAAAAAAJk/VRsG-oD7mP0/w668-h499-p-k/photo%2B%252813%2529.JPG
+1 for me too. Thanks for the instructions.
I think I've found a New Year's Day project to complete my DIY hammock!
Have a blast and good luck!
I finally got around to making this for my 10 yr old hanger.
Thanks for the great thread and vid.
https://lh3.googleusercontent.com/-d6vAZYsiuVU/UN9grZSaM6I/AAAAAAAAAJk/VRsG-oD7mP0/w668-h499-p-k/photo%2B%252813%2529.JPG
Woohoo! Your little one is going to beat the skeet for sure. Awesome job!
Fronkey
Mr.Tattoo
12-31-2012, 01:30
Thanks Fronkey .....Awesome this will be my DIY project for tomorrow...:D
great vid thanks for the info
Thanks for the concept... my next project.
When I came back to sleep there was a very large wolf spider on my top quilt. :scared:
http://upload.wikimedia.org/wikipedia/commons/thumb/2/25/Hogna_lenta_18.jpg/250px-Hogna_lenta_18.jpg
How long a piece of shock cord should I cut for the bottom of one of these? Thanks
packeagle
01-30-2013, 22:20
How long a piece of shock cord should I cut for the bottom of one of these? Thanks
I just ran a length through, opened the bottom up, and cut it off. I've since trimmed the shock cord by about 2 ft to save some weight. I don't mind that the bottom is always partially closed. YMMV.
Thanks. That was my initial plan, never fully open. Figured it would stretch enough, but didnt want it annoyingly tight.
Drum Man
02-10-2013, 09:37
I loved the video!
Northern Mike
02-15-2013, 11:08
Have you had any issues with bugs sneaking up through the bottom?
Have you had any issues with bugs sneaking up through the bottom?
I did once when I set up and left the net open and on the grass until I was ready for bed and when I came back there was a large wolf spider on my quilt that I apparently caught in my bug net. I learned to throw it up over the hammock when I am not in it. Never had any issues when cinched up.
turtleburger
02-26-2013, 16:27
I really like it, nice and simple
JosephCurwen
03-09-2013, 14:51
I had tube bugnet from Ticket to Moon, and made the mods to obtain a "fronkey's bugnet".
I really love the mods
http://uppix.net/c/3/7/daf5ed5f20bb207ae2dadcd9a3f5f.jpg
And i can put the bugnet in the hammock bag when not in use
http://uppix.net/5/6/9/0511c06aea304949a1915500b2fe7.jpg
Perfect :)
BittyGoat
03-16-2013, 11:51
Exactly what I have been looking for. Thanks for the pics and the video.
turtleburger
03-17-2013, 09:19
Darn another trip to get supplies, needed to make a bug net, will need to make 5 for the family, only 2 more hammocks for the kids to make.
cv66seabear
03-20-2013, 19:11
noob question:
What is a thread injector?
Nice video! Informative and entertaining.
I like your design, I hadn't thought of a bugnet without a zipper, but I'm in the market for one, so this is excellent.
- you think the skeeters in Maine are big? Come to Wisconsin! :D
Kent
noob question:
What is a thread injector?
Nice video! Informative and entertaining.
I like your design, I hadn't thought of a bugnet without a zipper, but I'm in the market for one, so this is excellent.
- you think the skeeters in Maine are big? Come to Wisconsin! :D
Kent
Ha ha a thread injector is a sewing machine for men who make gear. Some use a sewing machine to sew things. Another one that you might see is reference to a **** or a t*** its not a curse word, just a tent.
raddad55
04-05-2013, 20:43
Looks easy enough thanks
BittyGoat
04-08-2013, 20:13
I made this bugnet today and I must say, it is AWESOME! Exactly what I was looking for. There will be no critters crawling on me at night! :scared: Thanks Fronkey!
Ya know, I was all focused on the "clean" look and finish of an attached net but the more testimonials I hear I'm starting to love the simplicity. Little extra fabric but no added weight from zippers and webbing for reinforcing a zipper, so probably evens out on the weight factor. And a whole lot less sewing and engineering!
Now I just need to find some netting ( Wife keeps me on a tight budget ;) )
Stargaze
04-16-2013, 12:11
I have a roll of bug screen used on sliding glass doors, it's heavier than netting. Going to try making one out of it.
Happy to hear it's working out so well for everyone. Great job!
Fronkey
Gadget Man Camper
04-21-2013, 19:23
Finished my bug net today to complete my all homemade package.
It turned out great, I double stiched all the seams and put a 3 inch piece of velcrow on the top where my ridge line will poke through.
I first made a single layer hammock from ripstop nylon from Joann Fabrics.
It turned out ok, but I wanted a double layer so I could put my Thermarest in between. I ordered most of my supplies from DIY Gear for the double layer hammock the new straps and the bug net.
I made an under quilt from a poncho liner and I had a nice 10x 12 square tent rain fly that I'm using for my tarp.
Thanks to everyone on this forum for the great picture and videos.
I'm all set to go camping if spring will ever arrive in Minnesota this year.
Gadget Man :laugh:
Finished my bug net today to complete my all homemade package.
It turned out great, I double stiched all the seams and put a 3 inch piece of velcrow on the top where my ridge line will poke through.
I first made a single layer hammock from ripstop nylon from Joann Fabrics.
It turned out ok, but I wanted a double layer so I could put my Thermarest in between. I ordered most of my supplies from DIY Gear for the double layer hammock the new straps and the bug net.
I made an under quilt from a poncho liner and I had a nice 10x 12 square tent rain fly that I'm using for my tarp.
Thanks to everyone on this forum for the great picture and videos.
I'm all set to go camping if spring will ever arrive in Minnesota this year.
Gadget Man :laugh:
Awesome job gadget man! Those bugs are going to be ferocious this year and it sounds like you will be good to go.
Fronkey
Hey Fronkey, just made my first "Fronkey Net" this weekend and it turned out very respectable. It was my first time using a sewing machine, so my seams are a bit irregular, but all in all looks pretty good. I used a semi-flat felled seam for the ridge, and some cross grain reinforcement at the openings for the ridgeline.
Also, made my first Amsteel whoopie slings and Poly Tree Huggers. :-)
THANKS for sharing your design and posting your video!
Hey Fronkey, just made my first "Fronkey Net" this weekend and it turned out very respectable. It was my first time using a sewing machine, so my seams are a bit irregular, but all in all looks pretty good. I used a semi-flat felled seam for the ridge, and some cross grain reinforcement at the openings for the ridgeline.
Also, made my first Amsteel whoopie slings and Poly Tree Huggers. :-)
THANKS for sharing your design and posting your video!
That's awesome Docta. Great job!
You're for sure going to have a great season for camping this year and it will feel even better knowing you made it all yourself. :)
Fronkey
hairbear
04-23-2013, 16:36
Hey Fronkey, just made my first "Fronkey Net" this weekend and it turned out very respectable. It was my first time using a sewing machine, so my seams are a bit irregular, but all in all looks pretty good. I used a semi-flat felled seam for the ridge, and some cross grain reinforcement at the openings for the ridgeline.
Also, made my first Amsteel whoopie slings and Poly Tree Huggers. :-)
THANKS for sharing your design and posting your video!
Ive recently did the same. Im calling mine the winged dog bug net.
BradfromPA
04-30-2013, 12:06
great vid and a great idea, can't wait to try it out
Floridahanger
04-30-2013, 13:51
What a coincidence. I just watched this video last night while browsing youtube.
A fellow surfer from Florida I guess due to your youtube name?
I will be converting my bugnet to a modified Fronkeynet tonight after work(another late night).
cherring
05-09-2013, 20:03
What is the width of the original piece of netting? Awesome design, plan on using it for my hammock when I get it.
cherring
05-10-2013, 19:09
Will this material work for this project? Awesome low budget idea! Exactly what I was looking for.
elkhntingfool
05-12-2013, 09:21
I was looking at ordering some No-See-um from the web when I walked thru the Sewing room in the house and found a ton of red tulle that was left over from another project for my girls......SCORE.We don't have Gnats or No-See-UM's in this state so it will work great. I'll be whipping up a couple for me and my daughter this week. Fronkey, thanks for taking the time to share.
Do you think 126" across and 51" down would work with a hammock using a 108" ridgeline? I feel like its going to be tight and maybe not leave room for a UQ. I did the cutting without incorporating the hammock getting wide as you lay in it.
michaeldoe62
05-15-2013, 14:30
Awesome instructional.
Thanks Fronkey for this great idea you have shared.
I have sewn up the net and went to try it and have some questions.
From the photos below, you can see that the net is really low. I'd pretty much need to cinch the cord all the way on the bottom to get a seal, and it still hangs below the hammock.
Running a ridgeline around 100"
Used Tulle from Joanns, which was somewhere beween 50-56" to start
I'm 180lbs
Any ideas on how much to snip to get this right?
Thanks.
snellvillehammock
06-13-2013, 23:04
i was gonna use zipper but saw your video. Thanks. No need to order zipper anymore.
pinballwizard
06-14-2013, 13:37
This looks awesome! Do I need to have a certain amount of side wall clearance, because I was thinking of taking some off the bottom to make snakeskins with. Also, does this stay taught well enough, or should I try adding some rock pockets?
Once again I find the exact help I need for my own DIY projects on this amazing site.
I just ordered my no-see-um netting from Amazon (http://www.amazon.com/Black-No-See-Um-Mosquito-Netting-Fabric/dp/B00C3NJXIW/) [$3.99/yd with reasonable shipping and 62" wide, which is wider than most Ive seen by a clear 8"-1']
my shockcord from Ace Hardware (http://www.acehardware.com/product/index.jsp?productId=1288064) [18' of 3/16th shock cord for $3.99, free shipping if you have it sent to a store near you]
and my cord locks from Strapworks (http://www.strapworks.com/Cord_Locks_s/45.htm) [10 ball style cord locks with shipping cost me $5]
Now just need to wait for it all to get here so I can make my own nifty netting like the one in the video!
Thanks for sharing the vid!!
Edit: The one thing I dont see discussed on the video is how to slip it over the hammock, and I havent read all 20 pages of comments yet, so it may have been covered already, but I think what I may do is set all 3 sides, then cut the corners off, sew in an extra channel to run some shock cord through and use 2 more cord locks so the sides can be opened to let the hammock in and out, but then sealed shut again to keep the buggies and creepy crawlies out.
gunner76
06-22-2013, 23:02
Bought the bug net material months ago and just now got around to making a Fronkey Bug Net. Very easy to make and the video was a major help. I did add some tie outs at the top ends in case I need to stretch out the bug net. Finished weight is 8.6 oz
Don't know when I will be able to try it out as it has been raining off and on here the past few days with more to come.
chillyswimr
07-19-2013, 09:55
Do I need to have a certain amount of side wall clearance, because I was thinking of taking some off the bottom to make snakeskins with. Also, does this stay taught well enough, or should I try adding some rock pockets?
I just finished one, with Syb's enhancements (https://www.hammockforums.net/forum/showthread.php?t=41162). I suggest you go with it as designed. It works. The length is good and allows for gather using the draw cord. Rock pockets might make it drag, hang unevenly, and/or cause premature wear.
The only other change I made was to add a pair of dutchware clip-on tarp pull outs (http://dutchwaregear.com/clip-on-tarp-pull-outs.html) to pull it out at the sides a bit. Now it feels nice and roomy inside. Hoping for a backyard camp-out this weekend...
Thanks for the video! I've got some material on the way for one of these.
Made the bug net today. It works pretty well, but part of me wishes I would've gone the tube route with a draw cord on one end that would be easier to take off
http://img.tapatalk.com/d/13/08/04/hehubebu.jpg
I think I should've cut off about a foot at the bottom
Looks great. Any reason you can't still cut a foot off the bottom? Shouldn't be too much extra work, by the looks of it.
Mountnman
08-05-2013, 00:12
Looks like it will do the trick, I made a Fronkey bug net and it works great and weighs next to nothing
Boon Booni
08-07-2013, 22:46
Made the bug net today. It works pretty well, but part of me wishes I would've gone the tube route with a draw cord on one end that would be easier to take off
http://img.tapatalk.com/d/13/08/04/hehubebu.jpg
I think I should've cut off about a foot at the bottom
Why not do both? Tube style to allow for easy attachment to hammock and easy install of under quilt, but leave the cinch bottom for easier ingress once it's all set up.
chillyswimr
08-09-2013, 15:40
I can't seem to cinch the bottom hole any tighter than leaving a 5" or so opening due to the fabric getting bound up in the elastic -- plenty of space for Algonquin park mosquitoes to come up the hole and eat me alive, as per my experience the last 4 nights.
What can you do to close it completely. Chip clip maybe? Or maybe take the elastic cord a full turn rather than just a bight?
the_lorax
08-10-2013, 08:48
I can't seem to cinch the bottom hole any tighter than leaving a 5" or so opening due to the fabric getting bound up in the elastic -- plenty of space for Algonquin park mosquitoes to come up the hole and eat me alive, as per my experience the last 4 nights.
What can you do to close it completely. Chip clip maybe? Or maybe take the elastic cord a full turn rather than just a bight?
I sewed a rectangle flap of netting just inside the opening that I can then lay across the remaining gap.
I can't seem to cinch the bottom hole any tighter than leaving a 5" or so opening due to the fabric getting bound up in the elastic -- plenty of space for Algonquin park mosquitoes to come up the hole and eat me alive, as per my experience the last 4 nights.
What can you do to close it completely. Chip clip maybe? Or maybe take the elastic cord a full turn rather than just a bight?
I shortened mine about a foot, so when I lay in the hammock, my body weight seals the hole in the shock cord opening of the bug net underneath me. I reinforced the 'fixed' opening that my suspension goes through with grosgrain, and also added a foot of velcro to the other end, making it easy to move the net into place or remove it when it's not needed.
chillyswimr
08-10-2013, 11:06
Thanks for the ideas.
In regards to the top and sides, is everyone roll-hemming their edges or just simply running a single stitch line down the edges and turning the whole thing inside out? Straight stitch or zig zag? Any special seam needed for the ridge line?
DemostiX
08-16-2013, 12:20
Here's a guide to explicit sewing details for bug-net construction. Very good pics.
https://store-bdkmv.mybigcommerce.com/diy-bug-shelter-1-25/
Thanks to HF Member ???, in another thread here, for directing me to a page on another material YAMA also features
chillyswimr
08-19-2013, 08:35
Here's a guide to explicit sewing details for bug-net construction. Very good pics.
https://store-bdkmv.mybigcommerce.com/diy-bug-shelter-1-25/
Great link, thanks for sharing.
lemonsbw
08-19-2013, 15:03
I just made one of these and it's working great! I did a couple of mods just to help with durability. The parts where the ridgeline exits I reinforced with some extra ripstop that I used as accents on my hammock and did the same for the channel at the bottom where the shock cord goes. Turned out great and really easy!
blueskyhiking
08-21-2013, 13:56
I am currently putting together a Hennessy style hammock according to the instructions put out by headchange4u. That design has two side tie-outs to help get the asymmetrical layout. Has anyone made this style of bug net work with side tie-outs? I am thinking I could sew a small opening for the cord to go through for the tie-out.
Thanks for taking the time to post this tutorial. It looks super easy and effective!
lemonsbw
08-22-2013, 12:30
With this style bugnet it seems to me like if there was a tie out going through each side that it would be difficult to get out of because you couldn't just lift the netting up without having to work around the tieouts. If there was a zipper or velcro from the tieout hole to the bottom it might work. Not much experience here but that's my .02.
the_lorax
08-22-2013, 22:00
I am currently putting together a Hennessy style hammock according to the instructions put out by headchange4u. That design has two side tie-outs to help get the asymmetrical layout. Has anyone made this style of bug net work with side tie-outs? I am thinking I could sew a small opening for the cord to go through for the tie-out.
Thanks for taking the time to post this tutorial. It looks super easy and effective!
If you're going to make an opening for the tie-out to pass through I'd edge it with some grosgrain to provide tear resistance. Maybe attach the cord with a mini carabiner so you can unhook when you want to get out?
blueskyhiking
08-23-2013, 11:34
With this style bugnet it seems to me like if there was a tie out going through each side that it would be difficult to get out of because you couldn't just lift the netting up without having to work around the tieouts. If there was a zipper or velcro from the tieout hole to the bottom it might work. Not much experience here but that's my .02.
I was thinking the same thing. I am just trying to avoid putting in a zipper. My thread injection skills are sub-par to say the least!
If you're going to make an opening for the tie-out to pass through I'd edge it with some grosgrain to provide tear resistance. Maybe attach the cord with a mini carabiner so you can unhook when you want to get out?
I like the idea of the grosgrain. I have a plan but am not sure how well it will work. I am going to sew a small (1") square of grosgrain on both sides of the netting where the tie-out is. Then I am going to use a soldering iron to "drill" a small hole through the two layers of grosgrain and the netting that is sandwiched in between. This should sear the edges as well so it doesn't fray. Then, I will pass the 1/8" shock cord through the hole and tie it to a very small carabiner that will attach to the tie out loop. So the biner would be between the netting and the hammock with the shock cord going out the hole to the tie down stake. Should not need to be very strong and would allow me to easily unclib and get out of the hammock. If it works, I will post some pics.
Thanks for your ideas.
Hello to all. A quick message from a Groupon from my area for bug netting material.
12ft X 8ft bug material for $9.99. Just thought I would share. Order 2 and shipping is free.
http://www.groupon.com/deals/gg-trademark-global-jumbo-mosquito-net-1
chillyswimr
08-26-2013, 14:22
I am currently putting together a Hennessy style hammock according to the instructions put out by headchange4u. That design has two side tie-outs to help get the asymmetrical layout. Has anyone made this style of bug net work with side tie-outs? I am thinking I could sew a small opening for the cord to go through for the tie-out.
I used a pair of Dutchware tarp pull-outs (http://dutchwaregear.com/clip-on-tarp-pull-outs.html) attached to the hammock AND bug net for asym pull-outs. Saves tedious sewing, gives you the flexibility to experiment with the location of the pull-outs, and keeps the bug net removable.
blueskyhiking
08-28-2013, 12:50
I used a pair of Dutchware tarp pull-outs (http://dutchwaregear.com/clip-on-tarp-pull-outs.html) attached to the hammock AND bug net for asym pull-outs. Saves tedious sewing, gives you the flexibility to experiment with the location of the pull-outs, and keeps the bug net removable.
Thanks for the tip. I am real new to all this and am certainly not aware of all the options and cool hardware that is available. I am going to try to get the time to make this on Thursday so I can use it for the upcoming holiday.
With this type of clip, is it hard to get in/out of the hammock? It seems like you would need to leave it clipped to your hammock.
Thanks!
chillyswimr
08-28-2013, 14:58
Tie-outs do make access more awkward with a removable bug net with bottom access. However, through trial-and-error, you might discover you don't need/want the asym tie-outs at all (most hammocks don't have them). I'm still experimenting with my setup and I like having the flexibility to move or remove the tie-outs. I think I might end up just going without them, not sure yet. I'm new to this, too, but I have done a 5-day trip with mine.
blueskyhiking
09-02-2013, 18:15
I like the idea of the grosgrain. I have a plan but am not sure how well it will work. I am going to sew a small (1") square of grosgrain on both sides of the netting where the tie-out is. Then I am going to use a soldering iron to "drill" a small hole through the two layers of grosgrain and the netting that is sandwiched in between. This should sear the edges as well so it doesn't fray. Then, I will pass the 1/8" shock cord through the hole and tie it to a very small carabiner that will attach to the tie out loop. So the biner would be between the netting and the hammock with the shock cord going out the hole to the tie down stake. Should not need to be very strong and would allow me to easily unclib and get out of the hammock. If it works, I will post some pics.
Thanks for your ideas.
I finally got a chance to make this net and try out this idea. After I made the net according to the instructions in this thread, I got some 1 1/2" grosgrain and cut it into 4 squares (2 for each side of the bugnet). I stretched out the hammock by laying in it and pushing out both sides at the tie outs and had my wife put a chalk mark on the net where the ties were. I then sandwiched the netting between two pieces of the 1 1/2" square grosgrain and sewed them in place.
I have a 25w soldering iron that I used when I built a few solar panels a few years back (I think it is just a Radio Shack iron) and used it like a drill to put a hole in each center of the patches I had sewn on previously. This worked great and also heat treated the holes so they wouldn't fray.
I put through about 5 feet of 1/8" shock cord and tied a figure 8 on a bite. I hooked on one of those mini-carabiners to clip to the tie out when you were inside the hammock.
My son used the hammock two nights this weekend and it worked great. He would un-clip the clip for the side he was exiting and would just clip it back up when he got back inside the hammock.
I took a few pics.
Thanks everyone for all your ideas.
the_lorax
09-03-2013, 07:51
I finally got a chance to make this net and try out this idea. After I made the net according to the instructions in this thread, I got some 1 1/2" grosgrain and cut it into 4 squares (2 for each side of the bugnet). I stretched out the hammock by laying in it and pushing out both sides at the tie outs and had my wife put a chalk mark on the net where the ties were. I then sandwiched the netting between two pieces of the 1 1/2" square grosgrain and sewed them in place.
I have a 25w soldering iron that I used when I built a few solar panels a few years back (I think it is just a Radio Shack iron) and used it like a drill to put a hole in each center of the patches I had sewn on previously. This worked great and also heat treated the holes so they wouldn't fray.
I put through about 5 feet of 1/8" shock cord and tied a figure 8 on a bite. I hooked on one of those mini-carabiners to clip to the tie out when you were inside the hammock.
My son used the hammock two nights this weekend and it worked great. He would un-clip the clip for the side he was exiting and would just clip it back up when he got back inside the hammock.
I took a few pics.
Thanks everyone for all your ideas.
Nice work man, that looks really slick
Tendertoe
09-03-2013, 08:07
I finally got a chance to make this net and try out this idea. After I made the net according to the instructions in this thread, I got some 1 1/2" grosgrain and cut it into 4 squares (2 for each side of the bugnet). I stretched out the hammock by laying in it and pushing out both sides at the tie outs and had my wife put a chalk mark on the net where the ties were. I then sandwiched the netting between two pieces of the 1 1/2" square grosgrain and sewed them in place.
I have a 25w soldering iron that I used when I built a few solar panels a few years back (I think it is just a Radio Shack iron) and used it like a drill to put a hole in each center of the patches I had sewn on previously. This worked great and also heat treated the holes so they wouldn't fray.
I put through about 5 feet of 1/8" shock cord and tied a figure 8 on a bite. I hooked on one of those mini-carabiners to clip to the tie out when you were inside the hammock.
My son used the hammock two nights this weekend and it worked great. He would un-clip the clip for the side he was exiting and would just clip it back up when he got back inside the hammock.
I took a few pics.
Thanks everyone for all your ideas.
Awesome execution.
I put pullouts on one of my nets only by just attaching a pullout to the exterior of the net itself. This kicks the design up to the next notch by adding in pullouts to the hammock.
pinballwizard
09-15-2013, 21:38
Made a few of these from your design and love it!! Thank you very much for sharing this, Fronkey
RadicalHope
10-21-2013, 21:30
Thank you for sharing this! It looks very doable. I suck at sewing but I may just have to give this a try.
Thank you for sharing this! It looks very doable. I suck at sewing but I may just have to give this a try.
Thanks a bunch for watching! It's just as easy as it looks. :D
Fronkey
RadicalHope
10-22-2013, 20:28
It's just as easy as it looks. :D
Fronkey
I hope so! My last sewing project was in 8th grade home ec. It was a disaster. :lol:
I have all winter to get it right though. The bugs won't be back for quite some time. :D
I hope so! My last sewing project was in 8th grade home ec. It was a disaster. :lol:
I have all winter to get it right though. The bugs won't be back for quite some time. :D
That EXACTLY was my sewing experience before I got into DIY. haha Too funny. There is plenty of fun winter gear you can practice on too. Have fun!
Fronkey
Fronkey, I'm very interested in making this bug net, and I am trying to figure out how much no-see-um material I would need. I have 2 hammocks, one is a DIY that is around 9 ft, and the other is an ENO Double Nest which measures in at 9'4". Should I go with 4 yds? Also, will a square yard be wide enough?
RadicalHope
10-23-2013, 16:07
That EXACTLY was my sewing experience before I got into DIY. haha Too funny. There is plenty of fun winter gear you can practice on too. Have fun!
Fronkey
Well, that is very encouraging! What I'm hearing is that there is hope for me yet. :lol: Thanks! :D
DiverJim242
01-26-2014, 21:30
I think it's time to dust off the TI and make one of these.......
I just did this one from shear panels. Just gettin my feet wet for some bigger projects. It cost me $8 and some frustration. Took a couple hours.http://img.tapatalk.com/d/14/01/27/4a9y8epa.jpg
I think it's time to dust off the TI and make one of these.......
WOOHOO!
I just did this one from shear panels. Just gettin my feet wet for some bigger projects. It cost me $8 and some frustration. Took a couple hours.http://img.tapatalk.com/d/14/01/27/4a9y8epa.jpg
Looks great HamMike!
Fronkey
WOOHOO!
Looks great HamMike!
Fronkey
Thanks Fronk!!!!
Great Video! Never needed one of these because I have always had hammock with the net built on. Well things have changed, I have evolved and now need one. I just ordered some no-see-um and have practiced the way I want the ends but with a little testing i'm now undecided how I want the ends. One thing that was not explained very well was the end holes so maybe some feed back on that would help. Im debating just a big enough hole to pull my continuos suspension loop through or a clinch cord to pull the net tight on the ends. What have you guys done? Pic's below are the clinch cord set up.
Great Video! Never needed one of these because I have always had hammock with the net built on. Well things have changed, I have evolved and now need one. I just ordered some no-see-um and have practiced the way I want the ends but with a little testing i'm now undecided how I want the ends. One thing that was not explained very well was the end holes so maybe some feed back on that would help. Im debating just a big enough hole to pull my continuos suspension loop through or a clinch cord to pull the net tight on the ends. What have you guys done? Pic's below are the clinch cord set up.
Thanks for watching.
There are a few things you can do for the ends. I personally just made the hole small enough for the suspension to go through and my gathered end blocks the hole enough that nothing gets in. Some people have done the cinch cord method you showed and others have used velcro or omni tape to keep it closed.
Fronkey
Cinch or small hole. Velcro and even omni tape don't always play nice with netting.
Tendertoe
02-18-2014, 12:58
I've made a few of these and have done both omnitape and cinch and like both fine. Never had an issue with the omnitape messing with the noseeum netting.
The bigger question is how big to make your end openings. I prefer to have one whole side be able to open up and slide off the entire hammock.
Adds a bit of weight for the full side with omnitape. Adds a bit less weight if you do the full side cinch method as you're only adding the weight of a few feet of cordage.
Explained further in the below video -
Epc-YxlcFtg
Ok I think I got this figured out! If all you have to pull through the netting is a continuos loop for you suspension then a small hole is all you really need. If you need to pull tree straps and whoopies through then omni tape or clinch cord hole would be the ticket. I'm going with easy just a hole. The pics below show my test scrap.
This was a great thread. I was going to put a zipper at the bottom of my bug net, but now, I'm not. I am going to put shock cord at the bottom, with a cord lock. I was going to hand sew the whole thing, since I don't have a machine. But since I've watched a few videos on this, I am going to a friend's and borrow their machine. Great ideas here, I appreciate them!
gravityisnotmyfriend
04-02-2014, 09:15
Dusted off the ole thread injector and tried my hand at some sewing. Haven't injected a stitch since 8th grade home ec, but I got it figured out pretty quickly. The bug net turned out great! Used the sheer curtains that Cryptic Cricket suggested in his youtube video. Couple short pieces of para cord to cinch the ends down to the suspension, and 5' of shock cord for the opening. Having the shock cord channels pre-sewn was a huge time saver. It's much more transparent that it looks from this pic, the flash seems to reflect off the inside of the net.
http://i179.photobucket.com/albums/w320/gravityisnotmyfriend/Hammocking/IMG_20140401_223932327.jpg (http://s179.photobucket.com/user/gravityisnotmyfriend/media/Hammocking/IMG_20140401_223932327.jpg.html)
I just made a fronkey bug net. Thanks for the clear instructions.
Now, I need a little help with using it:
Specifically, the draw string at the bottom. It would appear that you have to cinch it up from the hammock after you are in it.
The reverse, getting out to pee at dark o'clock, could be a real cluster thingie. Sleepy, dark, pressure to get out all lead me to believe there might be a short cut or two.
What are they??
gravityisnotmyfriend
04-04-2014, 12:36
My shock cord draw string is very stretchy. I'm able to get in and out without adjusting the tension. The opening is probably about 2' in diameter unstretched, but when it's slid to the bottom of the hammock, there's no danger of bugs sneaking in.
BittyGoat
04-17-2014, 20:27
I made one of these and love it. Works great. One question though, I have an ENO Doublenest Hammock and it seems like I'm having a hard time getting in the "sweet spot" on a diagonal. It's like with the bugnet on there, it "restricts" me laying at a diagonal. I have to admit, it was my first time out, so maybe I wasn't trying hard enough. Any advice would be appreciated.
I made one of these and love it. Works great. One question though, I have an ENO Doublenest Hammock and it seems like I'm having a hard time getting in the "sweet spot" on a diagonal. It's like with the bugnet on there, it "restricts" me laying at a diagonal. I have to admit, it was my first time out, so maybe I wasn't trying hard enough. Any advice would be appreciated.
Do you have this issue with the bugnet off the hammock?
Fronkey
BittyGoat
04-18-2014, 12:23
No I do not have the issue with bug net off