Snow stealth. :cool:
Get a machine and take a class, if need be. The skill comes in handy. Think of it as a power tool, its no different than running a board thru the table saw. Take your time, keep your fingers out of the bad spots, go straight.
Printable View
Snow stealth. :cool:
Get a machine and take a class, if need be. The skill comes in handy. Think of it as a power tool, its no different than running a board thru the table saw. Take your time, keep your fingers out of the bad spots, go straight.
You're bang on about using 2 Flyz. The only reason I didn't is because I only had one. Next order I'm getting some more. What I did in the interim was add a prussik shackle on the end with the hook. Hooks are great for quick attach, but they don't let you adjust the tarp position on one end.
Very nice how-to page. Very simple with all the info needed referenced.
I've been trying to decide between going the route of a tyvek tarp versus coated nylon sew-up option. What was the weight of your 12x9?
Hi 100 mile runner.
I haven't weighed it yet, but it seems around the 2 lb mark with line clips and tarp sleeves all factored in. For the size it's surprisingly light. It seems well in line (weight by size) with my HH Hexfly 30D Silnylon. Also, while I mentioned it cost me $30 for the Tyvek, that was with shipping to Canada. The Tyvek itself was about $15.
Update:
The supplier I get it from says the following;
"Tyvek Homewrap Specifications:
Weight (first things first!): I have measured and weighed it carefully at 1.7 oz/square yard. A 4 x 7 foot piece weighs about 5.25 ounces.
Width: Exactly 9 feet.
Length: Order any quantity of length you like (measured in feet)."
Knowing that 9ft by 12ft is 12 yards, then the weight (before adding Zing-it) should be 20.4 oz or just over 1.25 pounds. I guess my estimate was overly conservative.
Cheers
Man I like this. Got the wheels a turning.
Tyvek fire tarp, hmmm....that is a great idea. Great for a communal area on a rainy day.
I haven't used Tyvek before but this seems like a great project.
How well does the Tyvek stand up to embers? I would think it takes a sizeable ember to put a hole in Tyvek. A much larger ember than would come from a small under tarp fire.
I set my fire tarp high so have never had a spark, even if you do you could pick up a roll of Tyvek tape for cheap on Ebay.
that's a great job, I love it. And it's not much heavier than my MacCat Deluxe o.O (and a few inches bigger in either dimension, too)
Definitely loads cheaper lol. Again, nicely done.
Nice job and great how to instructions