Newbie : Hennessy Hanger

I've decided to become a tree hanger! I just opened my new Hennessy Explorer Deluxe and I've a couple of questions:
1. What's the loop on the inside bottom of the hammock designed for?
2. In the lashing video on the Hennessy website, he shows alternating across the taut line and then down through the tree huggers to make the "Figure 8" lashing. I cannot tell from the video, but do you alternate the directions across the taught line on each successive lash (or are all lashes across the taught line made in the same direction)? I realize the grammer on this is terrible and confusing at best, but look at my username!

Welcome!

Not sure about the loop - is your hammock a side or bottom entry? If you could provide a picture it might be helpful to identify exactly what you are referencing.

All lashes are made in the same direction - at least thats how I do it and haven't had any problems.

Thank you for the feedback on the lashing direction. I thought they all went in the same direction, but on one of Mr. Hennessy's videos he appeared to alternate directions. I've practiced tying the knot since my original post.

It's the zip model. The loop is on the bottom of the hammock on the size opposite of the zipper. I was speculating that it might be to help hold a pad or insulation in place?

Thanks again!

pic please

the loop has me puzzled, too

sw

I'll have to dig my Hennessy Exp out of the hammock closet...but I don't recall seeing a loop on the interior.

And not to discount the Hennessy way of suspension, but I would highly recommend upgrading to whoopie slings / tree straps, or a cinch buckle / strap system. I use both depending on which hammock and like them equally, and far above the lashing approach. But suspension are about personal preference and what you like...just my two cents.

Quote:

---

Originally Posted by MotoHanger

I'll have to dig my Hennessy Exp out of the hammock closet...but I don't recall seeing a loop on the interior.

And not to discount the Hennessy way of suspension, but I would highly recommend upgrading to whoopie slings / tree straps, or a cinch buckle / strap system. I use both depending on which hammock and like them equally, and far above the lashing approach. But suspension are about personal preference and what you like...just my two cents.

---

+1 on the alernate suspension method. I have biner/rings on mine (no it's not light weight) but I love how quickly it sets up (literally under a minute tho I'm not trying to win any races when I hang out). I still use the figure 8 method on the boy's Exped (I like tying lashings and knots - it relaxes me) but it does take a bit longer to get the spacing where I want it and the angle of hang dialed in.

Really hopeing for a photo. I'm curious about the loop. :shades:

I think the loop is the asym tie out for that side, there should be one on each. These tie outs make a diagonal lay much easier. Not sure why it's inside though.

I immediately went to whoopie slings/toggles for my suspention. I now use the stock cordage for my tarp.

Quote:

---

Originally Posted by HillbillyHanger

It's the zip model. The loop is on the bottom of the hammock on the size opposite of the zipper. I was speculating that it might be to help hold a pad or insulation in place?

Thanks again!

---

I think you're correct. They look like they would be the attachment points for the Double Bubble Pad. If you look at the photos of it on the Hennessy site it has two of the mitten hooks, one connected to the pad at the shoulder (left side) and one at the foot end (right side).

I was really curious so I ran out to hang my Expedition. Apologies for the bad pics.

Foot side (inside):
https://www.hammockforums.net/galler...0183_thumb.jpg

Shoulder (zipper) side:
https://www.hammockforums.net/galler...0182_thumb.jpg


Just like MotoHanger I didn't recall them being there. I used CCF pads in this hammock, but didn't have a lot of issues. These would have been nice to utilize though! :rolleyes:

It seems like it would work to hold a pad in place, not just the DB but could be used on a CCF or store windshield sunscreen. It would be pretty easy to fabricate attachment points on/to a pad.

As everyone has mentioned, there are alternative suspensions that are easier and faster to use, some lighter and some heavier. I never found the lashing to be terrible. It's simplicity and utility are attractive to me. Use it for a while, and if you hate it, you have lots of options to try. :lol:

Here's another question that arose as I was taking pictures:

https://www.hammockforums.net/galler...0184_thumb.jpg

This velcro attachment "flap" on the outside near the foot end pullout. I didn't see a matching one at the headend. Wonder what it's for.....

Quote:

---

Originally Posted by HillbillyHanger

. . .
It's the zip model. The loop is on the bottom of the hammock on the size opposite of the zipper. I was speculating that it might be to help hold a pad or insulation in place?

Thanks again!

---

Yep! and as you note further down there is one next to your shoulder as you lay in the hammock. I bought the reflectix pad with mine - the loops line up with the attachment points on the pad. On my Explorer Dlx (purchased two months ago) there was a short piece of 3/16" shock cord with glove clips on each end looped through one of the loops. No idea what that is for.

Chuck

HappyHiker,
You got the right picture! That's exactly the loop that i was questioning.
I just got back from setting the hammock up for the first time and "climbing aboard". I almost fell asleep in less than 5 minutes. Nice breeze and gentle sway. I can't wait till my next trip to the woods
Thanks to everyone for their responses.
Happy Hiking!

Enjoy it! Don't be in a terrible rush to change over to whoopies. Get to know it and enjoy it first. There's nothing innately wrong with the lashing knots. I used mine for a year before even considering changing out the suspension.
The swaying with the trees or in a nice breeze is so awesome... I look at those poor ground-bound people and feel bad for them.