Is one more reliable than the other? Will zip ties crack at cold temps? I've got a bunch of zip ties laying around, why not put them to use?
Printable View
Is one more reliable than the other? Will zip ties crack at cold temps? I've got a bunch of zip ties laying around, why not put them to use?
While in my mind zip-ties could be used, after having used them for many years in my house and in the industry I find that they deteriorate faster than a good whipping might. Especially if you seal the whipping after having applied it. On the other hand zip-ties are hard at best to pull as tight as you can do a whipping.
Yes I am sure that the larger sizes could last a little longer and have much more tensil strength than the smaller ones again I find that without a tool to pull the tie tight it just does not do the job.
Of course as always that is my opinion and most people are quite aware of what one's opinions are worth or that everyone has one.
TOG
Here's a thought. In the field it will be easier to replace the whipping than a wire tie. The rope for the whipping will already be there. A wire tie is a one time use item. But I think if you are at home an constantly changing whipping and testing different ideas, then wire ties are far easier and pretty cheap.
Than again, the engineer in me always thinks of ways things can go wrong or fail.
What kind of rope do you use for whipping?
I am using armsteel 7/64" spectra right now. Way overkill. But I have a bunch of it and it is pretty cheap.
Noob question: what is the point in whipping. Does it perform a stop for the other rope?
I just made my first hammock this week and I was going to use zip ties on the ends but i went with Teblums suggestion of a double sheet bend instead. so far its holding good, havent spent the whole night in it yet, just a few hours but it hasnt moved and is really simple to take apart to adjust the folds. I'm still playing with it but Its not as comfortable as my HH yet.
Can you post some pics of that? I have been thinking about giving that a try.Quote:
Originally Posted by southpawx3
Ask away, that is why we are here.Quote:
Originally Posted by funbun
The whipping hold the hammock shape on the ends and stops the rope from going off of the end. A knot would do the same thing. A knot is simple and basically fool proof. The knot is just 1 half hitch.
The advantage to whipping the end is that you can easily undo it and redo it later. After a few minutes to a few hours it is hard to undo a knot.
HE -- I took some pics but you really cant see the lay of the webbing against the fabric so i didn't post them. best thing is to try it yourself its pretty simple to do with a piece of rope or webbing and a scrap piece of fabric. just bunch it up like you would for a hammock end and make it into a "U". when you tighen it up keep the end of the fabric a little past the webbing then it'll just hang free after everything is tight. rope definately makes a neater bend but the webbing holds just a well although it takes up a little more room
http://www.tollesburysc.co.uk/Knots/Sheet_bend.htm
the fabric will be your orange line and the support will be the blue line
not sure if i am being clear :confused:
A small difference of opinion here - the whipping isn't really intended to stop the support rope from sliding off the end. The bulk of the hems/knot in the end of the body material does that. The whipping is really only there to keep the ends gathered the way you want them while there's no tension on the support. I've hung several times (while adjusting the tension on my hammock body edges) with no whipping at all.Quote:
Originally Posted by hammock engineer
As for the wire ties, they work well. One by itself tends to let the edges slip though, so I double over the 'pulled corners' and add another tie just behind the first one. This locks off the corners and keeps the edges taut.
I've used ties on two sub-freezing trips now with no problems at all. If set up properly, the ties (or whipping) don't take any pressure, so there's not much of a durability issue.
As far as getting them good and tight, you can get a wire tie gun ( ~ $10 at Walmart) or do what I do and just use a pair of needlenose pliers. Once you have the tie hand-tight, use the tip of the pliers and twist, which will let you tighten them another 5-6 'clicks'.
I'll give you that. I haven't tried it without whipping or a knot.
Echo exactly what blackbishop said. For me, the whipping just keeps the hammock gathered like I want it. The supports don't slip at all, and I'd feel comfortable hanging in my hammock without any whipping, knots, or anything else on the hammock material...just the larkshead from my supports.
I use whatever cord I have laying around for my whipping...usually 550 cord, but a shoestring would work just as well.
I've also used zipties on sub-freezing trips with no problems. I used needle-nosed pliers to tighten the ziptie and the hammock material hasn't slipped through. Hasn't been a problem yet.
Zipties are very convenient, but they're obviously not field repairable. On any trip, I carry extra cord in my repair kit anyway...any problems with the ziptie and I'd just repair it with a whipping. That's where a little knowledge goes a long way. Be sure you know how to whip before you leave no matter which method you use...even whipping may need to be redone in the field.