continuous loops

Printable View

04-06-2012, 08:15
old4hats

continuous loops

I posted this yesterday in DIY forum by mistake, so I will try it here. I am helping a friend to change suspension on his Hennessey, we plan to use descender rings on a continuous amsteel loop. My question is, while most continuous loops are about 12'', will the loop for this project need to be any longer to be able to install it as the original rope is installed. Any additional advise will be appreciated.
04-06-2012, 08:33
Dutch

I would concider 12 inches to be the bare minimum. 14 would be better. Some HH have 1 hole and some have 2, the ones with 1 hole take less slack.

Hope it helps.
04-06-2012, 08:35
angrysparrow

Agree with Dutch that 12" is probably too short.

How are you going to attach the rings? Are they going to be spliced into the loop, or larks-headed on? Having them spliced in will give you a little more room to work with.
04-06-2012, 15:34
old4hats

Quote:

Originally Posted by Dutch

I would concider 12 inches to be the bare minimum. 14 would be better. Some HH have 1 hole and some have 2, the ones with 1 hole take less slack.

Hope it helps.

I'm sure it will, I have 12's but can whip up some longer, just wasn't sure if necessary. Thanks.
04-06-2012, 15:36
old4hats

Quote:

Originally Posted by angrysparrow

Agree with Dutch that 12" is probably too short.

How are you going to attach the rings? Are they going to be spliced into the loop, or larks-headed on? Having them spliced in will give you a little more room to work with.

I plan to larks head them, so as dutch suggested I will splice some a bit longer, thanks for the input.
10-09-2017, 04:33
AyeJay

3 Attachment(s)

I'm having problems with my new (first) hammock, a wicked centre ridge as well as floppy side where the head lays on the material.

I am wondering whether I've installed my continuous loops correctly. I just want to ask, I made 8-inch continuous loops. Is this too short, and if so, what is the negative result from installing too-short continuous loops? By the way it's a channeled end, so not sure if you were referring to channeled end hammocks when saying that 12-inches is the bare minimum.

Here is a photo of my hammock end. The first two photos are of one end, and the third is of the other end. The hammock is laying on the floor. Have it got the continuous loops in the right position? Let me know if I can reposition or redress the hammock and resend the photo:

Attachment 155678 Attachment 155679 Attachment 155680
10-09-2017, 07:34
old4hats

The length of the loop has no effect on the floppy sides. The. Whipped end style is thought by some to be able to affect the side tension, maybe , maybe not. Extra width fabrics can allow some extra side flop. The Knotty Mod is a go to for helping correct sagging sides. Your suspension loops as pictured are as good as it gets.
10-09-2017, 10:01
AyeJay

Quote:

Originally Posted by old4hats

The length of the loop has no effect on the floppy sides. The. Whipped end style is thought by some to be able to affect the side tension, maybe , maybe not. Extra width fabrics can allow some extra side flop. The Knotty Mod is a go to for helping correct sagging sides. Your suspension loops as pictured are as good as it gets.

Thank you oldhats.