Questions about ridgeline and webbing

Printable View

10-22-2012, 09:28
Anthonysmithxr

Questions about ridgeline and webbing

First, I've never hung on anything beyond the stock gt suspension. I've used the UL and now the pro.

Now, about the webbing. I've found 25yds of 1500# 1" webbing for very cheap. I'd like to cut this into tree straps but I'm concerned about loose. There are no sewn loops on the roll of webbing and I don't trust myself to sew them. Can I simply tie an overhand or figure 8 loop? That's what I would do with rope but I don't know how knots affect the rating of straps.

Second, I've been learning what I can about structural ridgeline and I'm a bit confused. It seems to me (and I've made little rope models to try and visualize it) that the angle of the ridgeline between where it connects to the hammock and the suspension is inevitably the same angle as the suspension/tree straps. In this case, would it be possible for me to use one long piece of webbing for a ridgeline and tree straps?

I hope some of this makes sense. I'm still very new at this and hardly know the vocabulary. Thanks.
10-22-2012, 09:41
MDSH

Sewn loops are easy, secure, and very handy.

You would not need more than 12-14 feet of strap on each end, depending on how big your prospective trees might be.

Check this out for calculating things: http://theultimatehang.com/hammock-hang-calculator.html

SRLs are not usually made of webbing.

Mike
10-22-2012, 09:56
aschurr

You know all the different configuration's for hanging can get quite confusing on what choices to make.sometimes it makes me feel indecisive on what to use
10-22-2012, 10:16
Loki

Quote:

Originally Posted by Anthonysmithxr

First, I've never hung on anything beyond the stock gt suspension. I've used the UL and now the pro.

Now, about the webbing. I've found 25yds of 1500# 1" webbing for very cheap. I'd like to cut this into tree straps but I'm concerned about loose. There are no sewn loops on the roll of webbing and I don't trust myself to sew them. Can I simply tie an overhand or figure 8 loop? That's what I would do with rope but I don't know how knots affect the rating of straps.

Second, I've been learning what I can about structural ridgeline and I'm a bit confused. It seems to me (and I've made little rope models to try and visualize it) that the angle of the ridgeline between where it connects to the hammock and the suspension is inevitably the same angle as the suspension/tree straps. In this case, would it be possible for me to use one long piece of webbing for a ridgeline and tree straps?

I hope some of this makes sense. I'm still very new at this and hardly know the vocabulary. Thanks.

[1] If the webbing is nylon - don't use it. Use only poly webbing
[2] sewing works but you can also use a water knot to form a loop - see animatedknots.com or ask any experienced rock climber

SECOND: Hammock Ridgeline - try using a whoopie sling and adjust it to be about 83% of the hammock's total (flat) length. Connect the Ridgeline to the ends of the hammock suspension -then the ridgeline will be level between the hammock ends. Course, if you are talking about the Tarp ridgeline - that is a different matter - my tarp ridgeline is never connected to the hammock suspension at all (well almost never).:)

I use this Mil-Spec and make my own webbing (nope, it does not stretch)
http://www.rei.com/product/783605/1-...ing?ref=472006
Best of luck to you! Always HYOH!
10-22-2012, 10:52
mattyg

Give it a try you may come up with something new or unique. Look at the sls (single line suspension) I bet you could do a webbing version of that. Enjoy your tinkering and don't let them tell you it can't be done just because it hasn't been done.
10-22-2012, 11:33
MDSH

Quote:

Originally Posted by mattyg

Give it a try you may come up with something new or unique. Look at the sls (single line suspension) I bet you could do a webbing version of that. Enjoy your tinkering and don't let them tell you it can't be done just because it hasn't been done.

Amen, Matty.

But 1600# is not strong enough for a SLS.

Mike
10-22-2012, 11:42
Loki

Quote:

Originally Posted by mattyg

Give it a try you may come up with something new or unique. Look at the sls (single line suspension) I bet you could do a webbing version of that. Enjoy your tinkering and don't let them tell you it can't be done just because it hasn't been done.

+1 Agree... HYOH!
10-22-2012, 16:23
readyme

Just tie an overhand on a bite. When used with webbing, it is also called a water knot.
10-22-2012, 16:24
readyme

I personally use knots instead of hardware when possible. It makes things more versatile IMO. Besides, it makes you think a little more.
10-23-2012, 13:55
Anthonysmithxr

Thanks to all of you for the helpful replies! I've ordered the webbing and also 30' of spectra. I think between those I can do pretty much anything.

I hesitate to see loops in the webbing because I don't have access to a machine and, for all the stress on using properly rated webbing, I'd hate to botch it up with my sorry stitching. Overhand on a bight is my plan.

I'm looking forward to trying out a ridgeline and a hardware-less set up. I do trust my knots, even if not my sewing! I'm really excited to move into the world of DIY hammocking! Thanks again for all the help!
10-23-2012, 13:58
Anthonysmithxr

Quote:

Originally Posted by MDSH

Amen, Matty.

But 1600# is not strong enough for a SLS.

Mike

What's an SLS?
10-23-2012, 15:25
MDSH

Sls

Quote:

Originally Posted by Anthonysmithxr

What's an SLS?

Single Line Suspension.

Mike