Originally Posted by Hennessy Asym patent on how hammock is made asym
The bed can be formed from a rectangular sheet of material, but a non-rectangular asymmetric quadrilateral shape is preferred, as asymmetric shapes improve the opportunities to adjust the size and proportion of the hammock to differences in the human anatomy..........
In one form of the invention, the shape of the short sides of the fabric bed can be adjusted before folding. After the length of hammock fabric and the ridge line length are established, the shape of the fabric across the bottom of the hammock can be adjusted by changing the shape of the ends of the fabric A concave angle or curve cut into one or both ends would have the effect of raising the middle of the hammock relative to its sides. A convex angle or curve cut into the ends of the hammock would have the effect of lowering the bottom of the hammock relative to its sides. ..............
In another embodiment, the distance that the lateral tension points are offset in opposite directions on either side of the suspension axis, and the resulting angle and leg lengths on each side of the suspension axis are also important factors determining the form and comfort of an asymmetrical hammock.
A further refinement of the asymmetrically shaped hammock is to use asymmetrically shaped pieces of material for the fabric bed. The adjustment of the lengths of each of the fabric bed's sides allows further refinements of shape to improve comfort, fit and economy. To improve balance for the occupant, making one side of the hammock longer than the other allows the occupant's lower torso, which generally weighs less than the upper torso, to project further to one side of the hammock and still remain balanced. Location of the occupant is an especially important factor when dealing with balance and weight distribution, which differ between men and women.
A second benefit of adjusting the lengths of the sides of the hammock is that less fabric is required at the end of the hammock where the occupant's body is narrower, that is, in the area around his legs and feet. This also results in a weight savings of the finished product.
After establishing the direction of the diagonal axis of the hammock bed, because the occupant will lie only in one direction on this new axis and will not be as comfortable lying diagonally in the other direction, it may be advantageous to increase the number of folds of fabric on one side of the suspension axis and to decrease the number of folds of fabric on the other side of the suspension axis in the reverse order at each end of the hammock bed to make better use of the fabric on the side of the hammock which will not be used by the occupant. When the number of folds of fabric is increased on the side of the hammock intended for the occupant, usable space will increase on that side and will provide an improvement in comfort for the occupant.