Anyone know the minimum hang distance for a JRB Bridge? Wondering if I will have enough room to hang inside with it.
Craig
Printable View
Anyone know the minimum hang distance for a JRB Bridge? Wondering if I will have enough room to hang inside with it.
Craig
Distance between the outer rings for the UL model about 8.5 ft, for my older model about 9.5 ft, and I assume the current DLX model is something close to one of those numbers. Just add some minimal length of however much you think you might need between the outer rings and stand/tree for the suspension to be wrapped. Really just a few inches on each end maybe, or add 1 foot on each end if you want to be sure.
HI Craig, I measure 10 feet between rings. Using the webbing you can make it fairly short. using whoopie slings will require more distance but I do have a pair of whoopies if you want them. Joe
spreader bars are 32 inches long
Thanks, now I know the Spreader Bars are 32" so from the hammock to the outer ring I'm guessing is about 18-20" is this a correct assumption? I'm making an end mock up to see if it will clear some furniture.
BB58 and Jokerr have the numbers on the JRB, the RR is longer but I was able to hang both inside of my 14 foot wide testing space and get good suspension angles on both.
Talked to Jacks R Better earlier and the hammock to ring is ~20", unfortunately I won't be able to fit a bridge inside where I currently hang.