Originally Posted by domromer
can webbing hold a slippery half hitch? I was thinking of attaching webbing to the Eno and using it both as the tree hugger and the suspension and tying it off at the tree with a slippery half hitch.
Now I get it! Sorry for the confusion
Try this. Attach the webbing through the channel of the webbing like the stock suspension came, use a bowline as the knot.
Then use either the Four Wrap Knot
, The Improved Four Wrap Knot
or the Round turn with two half hitches
(you can also just use one half hitch in this case as the turns take the load); you can finish either one of these slippery.
Using these two hitches will prevent the knot/hitch from binding and will be very easy to untie.