Well I got to play around with my JRBHH while seam sealing it this weekend. Thought I would pass along some more info and pics. Basically I was playing around with the guy lines and staking techniques.
Here are some different technigues for guying out the tarp tent. I am not counting the stake that holds the bottom of the JRBHH to the ground in any of these examples:
1 stake, 2 line method (you could get buy with only using 1 line, attached at the corner):
2 stake, 4 line method. This method worked the best for getting good tension on the tarp. The bottom picture is just using the corner tie out (like above). It shows you the difference in the tautness between the two methods:
Here's a shot with one of the doors "half" open. Notice the door is staked out on the bottom:
A door fully open:
One side, both doors, fully open:
Shot of the beaks closed for weather protection. Guying out the beaks make a difference on how tight the roof pitches: