this is my net; loosely based on imrisks quarterweight netting design.
no see um netting, cut long enough to overlap the head and foot end by about 6 inches... width of the fabric roll is just right to work with a structural ridgeline and an average (60 in wide) DIY hammock
hand-sew the following. a pocket on each corner, two grosgrain (or any ribbon) loops at the ends in the center. if you don't want to sew, you could tie a clove hitch around pebbles to make weights for the corners and to make anchor points for tying to your suspension/ridgeline.
bugnet in place
loops for attaching to suspension with prussik knot