Originally Posted by toygun
Anyone know what caused my tarp lines to do this?
Using a paracord and the small Figure 9 I fixed mine, probably for good.
Figure 9 for each anchor point (6 for the ProFly)
Paracord cut to desired length (ends whipped/melted)
Pictures are worth a 1000 words so there are 2 attached.
In the off chance I run across the right size cordage, I left the original hardware in place.
Tie one end of the paracord to the loop on the fly  and put the fig 9 right next to the fly as shown:
After securing the guy line it's a 2 second matter taking up the slack like so:
You can tie off the loop for a bit of extra security or if it's in the way if you want.
Hope this is helpful.
 I used a bowline